The Universal Selection Source: Plastics & Elastomers
A SpecialChem Client is seeking to improve or substitute their polishing process with a new stable manufacturing process which results in a high-quality polish of small faceted gla...
A SpecialChem Client is seeking biodegradable polymer solutions as replacements for current non-readily biodegradable acrylamide based polymer technologies.
The key focus would ...
The SpecialChem Client is offering safer and faster tetrazoles synthesis process by heterogeneous phase catalyzed by a supported organotin reactant.
A SpecialChem Client is offering a platform of high temperature resin, soluble in solvent, with dielectric properties, Low-CTE profile and good adhesion performance. The producer i...
A SpecialChem Client is seeking for a colored technology that will react with a formulation containing water and oil, to become transparent or visibly paler.
Cosmetic Claims : How to Prove Them Scientifically
Dec 2, 2015
More info and registration
Solving Coating Film Defects Part-2
Dec 3, 2015
Carbon Nanotubes: Mapping Opportunities for Commercial Adhesives
Dec 8, 2015
Creativity with Plastics
Green and bio-plastics
High Heat Materials
Durable, lightweight and affordable plastics have helped revolutionize the electrical and electronics products we rely on every day. Plastics have been the building blocks and stepping stones of Electrical & Electronics industry. Engineering plastics and high performance polymers progressively play a critical role in the production of electric & electronic (E/E) components.
Subscribe to this channel
Oct 30, 2015 |
By Alan Dubin
The major energy sources used for internal combustion engines, since their inception in the late 19th century, have been gasoline and diesel fuel, with occasional use of electricity depending on the type of vehicle. The gasoline engine is...
Aug 28, 2015 |
Exploring the new and emerging plastics materials, processing and applications in this major renewable energy segment is the focus of the SpecialChem, 7th edition, online course Polymers in Photovoltaics (PV): Innovations & Opportunities.
Sep 17, 2014 |
By Mark DeMeuse
Thermal management has always been a major concern in the design of high frequency, high power electronic devices. For example, historically, in many power amplifier designs, the vast majority of the power that needs to be dissipated is from the high power field effect transistors, or FET's, themselves. In these cases, the high power dissipation ...
Apr 22, 2014 |
Thermoelectricity is the direct conversion of
temperature gradient to electric voltage, and vice-versa.
There are several potential applications of
thermoelectricity, ranging from clean noiseless cooling, to
waste-power harvesting in automotives. The performance
of thermoelectric devices is still a challenge, and many
approaches have been res...
Apr 1, 2014 |
Energy Density and Corona Resistance (or Voltage Endurance) are two critical properties that are commonly used to characterize the performance of materials targeted for insulation and capacitor applications. A common problem in such dielectric designs involves the maximization of both energy density and voltage endurance. One of the strategies that...
Sep 16, 2015 |
Wood Plastic Composites or WPCs - the combination of wood and plastic - are gaining popularity as a safe, environmentally sustainable and long-lasting material for use in outdoor decks, fences, railing and window frames. Today, WPCs can be found everywhere from National Parks to your neighbor's backyard. WPCs offer a wide range of advantages over a...
May 5, 2015 |
By Don Rosato
The E&E market ranks as the 3rd largest plastics end use market, only exceeded in volume size by packaging and building and construction, yet the E&E sector uniquely crosses over all of the twenty major plastics markets, namely packaging, building and construction, automotive, electrical and electronics, appliance, medical, consumer products, toy, ...
Jul 8, 2014 |
By Thibaud Deleger
From the elastomeric materials, side significant changes occurred in these past years, with many more options offered to product designers and engineers. Vulcanized rubbers were the first to be developed, and therefore have a long history in multiple uses. Flexible PVC entered the game, and thanks to their cost competitive pricing and almost infini...
Apr 10, 2014 |
Disperse Multiwall carbon nanotubes (MWCNTs) are incorporated aqueous N-hydroxy methyl acrylamide, which is subjected to crosslinking to develop a transparent conductive composite free standing film. The effects of the concentration of MWCNTs and temperature on optical and electrical properties of nano-composites are investigated. Interestingly, on...
Mar 3, 2014 |
Thet invention relate to a lighting device, and in particular to a lighting device structure which makes it possible to make the whole thickness thinner as such to obtain a high illuminating efficiency in such a way to remove a light guide plate and makes it possible to obtain an effect that the shape and a 3D effect of light change by forming a pr...
Subscribe to our Newsletters
Copyright © SpecialChem 2015 | Visit www.specialchem.com