The Universal Selection Source: Plastics & Elastomers

Industry News

BASF Launches Bosch ESP Control Module Made of Ultradur® for Vehicles in Hot-humid Conditions

SpecialChem / Jun 24, 2011

The ESP 9, latest generation of Bosch's electronic stability program (ESP), is part of the safety package in many vehicles today. Its control housing is molded from the especially hydrolysis-resistant Ultradur® B4330G6 HR from BASF: This special compound from the PBT family satisfies the very demanding requirements faced by engineering plastics in hot-humid environments.

ESP Control Module
Bosch ESP Control Module Made of Ultradur®

Test conditions

The new Ultradur® B4330G6 HR retains its material properties such as high strength, elasticity and impact strength during long-term testing at 85 °C and 85% relative humidity. It withstands test periods of over 5000 hours without noticeable characteristics of aging. This is several times longer than the hydrolysis-resistant PBT used to date. Many materials compared already show significant degradation after only one third of this time.

Severe test conditions for electronic components in automobiles are no longer unusual today. As the result of continual downsizing, the operating temperature under the hood has increased continuously. In addition, electronic components from global suppliers are used in automobiles worldwide and for this reason must pass tests based on all international standards and test conditions.

Processing stability laser marking laser welding

An additional benefit of the hydrolysis-resistant Ultradur® is its stability during processing. Its rheological behavior, i.e. its flow characteristics, remains stable even after longer residence times in an injection molding machine. This is not something that can be taken for granted, as many additives that are used to improve the hydrolysis resistance can reduce the flowability quite considerably, with flowability worsening as the residence time and processing temperature increase.

The material is also suitable for laser marking and acts as a very good absorbing partner during laser welding. Suitability for laser marking is of special importance for the ESP 9 from Bosch, since considerable information about the component must be entered in the data matrix code on the plastic by means of a laser. At the same time, laser weldability is necessary in order to seal the cover (also molded from Ultradur) tightly after the electronics have been installed. Ultradur® B4330G6 HR is available from local production in Asia, Europe and the NAFTA region.

BASF - The Chemical Company

BASF is one of the world's leading chemical companies. Its portfolio ranges from chemicals, plastics, performance products, and agricultural products to oil and gas. As a reliable partner BASF creates chemistry to help its customers in virtually all industries to be more successful. With its high-value products and intelligent solutions, BASF plays an important role in finding answers to global challenges such as climate protection, energy efficiency, nutrition and mobility. BASF Corporation, headquartered in Florham Park, New Jersey, is the North American affiliate of BASF SE, Ludwigshafen, Germany. BASF posted sales of more than Euro 63.9 billion in 2010 and had approximately 109,000 employees as of the end of the year.

Source: BASF


Back to Top