DuPont™ Kapton® colorless polyimide film, a new material currently in development for use as a flexible superstrate for cadmium telluride (CdTe) thin film photovoltaic (PV) modules, has enabled a new world record for energy conversion efficiency. A team at Empa, the Swiss Federal Laboratories for Materials Science and Technology, has demonstrated a conversion efficiency of 13.8 percent using the new colorless film, leapfrogging their previous record of 12.6 percent and nearing that of glass.
CdTe Solar Module with PI Film
Because Kapton® film is over 100 times thinner and 200 times lighter than glass typically used for PV, there are inherent advantages in transitioning to flexible, film-based vs. rigid glass CdTe systems. High-speed and low-cost roll-to-roll deposition technologies can be applied for high-throughput manufacturing of flexible solar cells on polymer film as substrates. The new polyimide film potentially enables significantly thinner and lighter-weight flexible modules that are easier to handle and less expensive to install, making them ideal for applications including building-integrated photovoltaics.
"Rather than transporting heavy, fragile glass modules on large trucks and lifting them by crane onto rooftop PV installations, one could imagine lightweight, flexible film-based modules that could simply be rolled up for transport, and easily carried up stairs," said Robert G. Schmidt, Business Development Manager, Photovoltaics - DuPont Circuit & Packaging Materials. "With record-setting efficiency established through Empa, we're confident this flexible, lightweight and durable material has the potential to revolutionize the industry by enabling flexible design and lowering balance of system costs."
Increase in efficiency toward achieving grid parity
Empa's Laboratory for Thin Films and Photovoltaics is developing high-efficiency thin film solar cells with emphasis on novel concepts for enhancing their performance, simplifying the fabrication processes, and advancing device structures for next generation of more efficient and low-cost devices. They have been doing groundbreaking work in developing and optimizing a low deposition temperature process (below 450 degrees Celsius) for high-efficiency CdTe solar cells on glass (reaching 15.6 percent efficiency) and polymer film (reaching 12.6 percent efficiency, the highest value before the recent improvement to 13.8 percent). Only a few weeks ago Tiwari's team also set a new world record in energy efficiency (of 18.7 percent) for another type of flexible solar cells based on copper indium gallium (di)selenide (also known as CIGS).
CdTe Solar Module
"Finding a film that could both be transparent and withstand high processing temperatures was a challenge initially, but the new Kapton® colorless polyimide film had both the tolerance for high temperatures needed, and higher light transmittance due to its transparency that allowed it to exceed our previous world record in conversion efficiency of flexible CdTe solar cell," said Ayodhya N. Tiwari, Head of the Laboratory. "As we continue to raise the standards for PV efficiency, materials make a distinct difference in the progress we make toward achieving grid parity. Of course, further development is needed for addressing cost and stability issues." Tiwari plans to present a technical paper on the full findings at the 26th European Photovoltaic Solar Energy Conference and Exhibition in Hamburg, Germany, being held Sept. 5 to 9, 2011.
DuPont™ Kapton® polyimide film has made innovative design solutions possible in a range of industries over the last 45 years including aerospace, automotive and industrial applications. With a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature and other demanding environments, Kapton® films have set the standards in high performance, long-term reliability and durability, and are ideally suited for applications in the PV industry. Three new Kapton® PV9100 series films were introduced for the thin film PV market in 2010, including offerings for amorphous Silicon (a-Si) modules and Copper Indium Gallium Selenide (CIGS) photovoltaic applications.
Empa is an interdisciplinary research and services institution for material sciences and technology development within the ETH Domain. Empa's research and development activities are oriented to meeting the requirements of industry and the needs of our society, and link together applications-oriented research and the practical implementation of new ideas, science and industry, and science and society.
DuPont is a science-based products and services company. Founded in 1802, DuPont puts science to work by creating sustainable solutions essential to a better, safer, healthier life for people everywhere. Operating in more than 90 countries, DuPont offers a wide range of innovative products and services for markets including agriculture and food; building and construction; communications; and transportation.