The Universal Selection Source: Plastics & Elastomers

Industry News

KraussMaffei's Twin-screw Extruder Utilized for Processing PO & PVC-based Composites

SpecialChem / Jun 15, 2011
Extruder
Counter-rotating Twin-screw Extruder

Processors working with natural fiber composites (NFC) face the ongoing problem of excessive wear, which shortens the service life of the extruder's plasticizing unit. KraussMaffei Berstorff offers an effective response to this problem for its counter-rotating, parallel twin-screw extruders. In machines intended for processing polyolefin and PVC-based natural fiber composites, the core element, the processing unit, is supplied with extra wear protection.

Optimized protection against adhesive and abrasive wear

"Wear protection optimized for the material being processed guarantees far longer service lives for the processing units; this minimizes downtime and the associated maintenance costs and loss of productivity," says Michael Finkenzeller, Product Manager Renewable Raw Materials in the Extrusion Technology Division at KraussMaffei Technologies GmbH. Increased expansion forces can occur during processing of resin compounds and result in adhesion wear on the screw outer diameter and in the barrel bores. To reduce this adhesion wear, KraussMaffei Berstorff has adapted the screw geometry to optimize flight and inter-screw clearance. The service life of the processing units is also substantially extended by tungsten-carbide armoring on the screws and bimetallic-plated barrel bores. When wear does cause problems, processors nonetheless benefit, because they need only replace the bimetallic bushing and not the entire barrel. The cost savings of this approach are substantial. Apart from adhesion wear, abrasion wear can also be a problem in processing natural fiber composites. KraussMaffei Berstorff counters this problem by giving the screws protective hard chrome plating.

Innovative and energy efficient machine engineering for a wide range of applications

Counter-rotating twin-screw extruders are used worldwide for processing plastics reinforced with natural fibers, for example, wood plastic composites (WPC). This type of KraussMaffei Berstorff extruder also features a number of other benefits, for example, steady material feed, gentle, non-destructive processing and highly stable screw pressure for the production of intermediates. In addition, they are an optimal solution for processing ready-to-use compounds. High installed screw torque combined with a long processing unit guarantees very high output rates. The special screw geometry is gentle on the material and delivers a homogenous melt at an optimal temperature, even with high melt pressures.

Because of their longer life, natural fiber composites are replacing pure natural materials, such as wood, in many areas. Typical examples are decking, fencing and screening. KraussMaffei Berstorff offers complete, application-specific system solutions for all these types of product.

About KraussMaffei Berstorff

KraussMaffei Berstorff GmbH designs, manufactures, and supplies machines and lines for the production and processing of plastics and rubber. The company offers extrusion technology, vulcanizing technology, TPE monoprofile lines, TPE coextrusion lines, rubber-TPE-hybrid profile lines, multiplex extrusion lines, and roller-head lines; and roll covering machinery systems, such as covermatic systems, crossed extrusion systems, and strip-winding systems. It also provides twin screw extruders; film and sheet extrusion lines, including thermoforming sheets, PET films, engineering film sheets, plastic sheets, and fabric-reinforced sheets; and systems to make insulated pipes. In addition, the company offers melt-fed single-screw extruders, such as discharge extruders, vented extruders, and cooling extruders; and foam extrusion systems, such as form boards, foam sheets, foam tubes and profiles, and beads. Further, it provides service and maintenance packages. The company was founded in 1892 and is based in Hannover, Germany with additional offices in Shanghai and Beijing, China; and Moskau, Russia. KraussMaffei Berstorff GmbH operates as a subsidiary of KraussMaffei Technologies GmbH.

Source: KraussMaffei Berstorff


Center

Increase digital print quality in Films, Textiles and Paper!

PolyOne metal replacement
Channel Alerts

Receive weekly digests on hot topics

Receive your alerts

Back to Top