The Universal Selection Source: Plastics & Elastomers


Dioctylphtalate @ 100%, 100°C

Chemical resistance of plastics to Dioctylphtalate @ 100%, 100°C is depending on their ability to keep properties when exposed to this reagent. Traditional chemical degradations encompass aesthetic defects, decomposition, swelling, crazing, cracking, and/or change in mechanical properties such as impact strength, tensile strength and elongation. Chemical Resistance of plastics vary with temperature and reagents concentration. ASTM D543 describes the Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents.

Name of the polymer Explicit name of the polymer Resistivity
ABS Acrylonitrile-Butadiene Styrene Non Satisfactory
ABS FR Acrylonitrile-Butadiene Styrene flame retardant Non Satisfactory
ABS High Heat Acrylonitrile-Butadiene Styrene High Heat Non Satisfactory
ABS High Impact Acrylonitrile-Butadiene Styrene High Impact Non Satisfactory
ABS/PC Acrylonitrile-Butadiene Styrene/Polycarbonate Non Satisfactory
ABS/PC 20% GF Acrylonitrile-Butadiene Styrene/Polycarbonate 20% glass fiber Non Satisfactory
ABS/PC FR Acrylonitrile-Butadiene Styrene/Polycarbonate flame retardant Non Satisfactory
Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) Limited
Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) Limited
Amorphous TPI, High Heat, High Flow, Lead-Free Solderable, 30% GF Amorphous TPI, High Heat, High Flow, Lead-Free Solderable, 30% GF Limited
Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) Limited
Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) Limited
Amorphous TPI, Highest heat, Chemical Resistant, 260C UL RTI Amorphous TPI, Highest heat, Chemical Resistant, 260C UL RTI Limited
Amorphous TPI, Moderate Heat, Transparent Amorphous TPI, Moderate Heat, Transparent Limited
Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) Limited
Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) Limited
Amorphous TPI, Moderate Heat, Transparent (Powder form) Amorphous TPI, Moderate Heat, Transparent (Powder form) Limited
CA - Cellulose Acetate Cellulose Acetate Non Satisfactory
EVA Ethylene Vinyl Acetate Non Satisfactory
Fluorosilicone low hardness Fluorosilicone low hardness Satisfying
Fluorosilicone, 47 Shore A, hot curing Fluorosilicone, 47 Shore A, hot curing Satisfying
HIPS - High Impact Polystyrene HIPS - High Impact Polystyrene Non Satisfactory
HIPS FR V0 High Impact Polystyrene flame retardant V0 Non Satisfactory
LDPE - Low Density Polyethylene LDPE - Low Density Polyethylene Non Satisfactory
LLDPE - Linear Low Density Polyethylene LLDPE - Linear Low Density Polyethylene Non Satisfactory
PC 20-40% GF Polycarbonate 20-40% glass fiber Non Satisfactory
PC 20-40% GF FR Polycarbonate 20-40% glass fiber flame retardant Non Satisfactory
PC high heat Polycarbonate high heat Non Satisfactory
PEEK Polyetheretherketone Satisfying
PF BMC GF filled PF BMC GF filled Non Satisfactory
PF powder molding, GF filled PF powder molding, GF filled Non Satisfactory
PF powder molding, GF filled, FR V0 Halogen free PF powder molding, GF filled, FR V0 Halogen free Non Satisfactory
PF powder molding, GF filled, Rubber modified PF powder molding, GF filled, Rubber modified Non Satisfactory
PF powder molding, Mica filled PF powder molding, Mica filled Non Satisfactory
PF powder molding, mineral filled PF powder molding, mineral filled Non Satisfactory
PF powder molding, Rubber modified PF powder molding, Rubber modified Non Satisfactory
PF powder molding, Textile filled PF powder molding, Textile filled Non Satisfactory
PF powder molding, wood flour filled PF powder molding, wood flour filled Non Satisfactory
PMMA Polymethylmethacrylate (Acrylic) Non Satisfactory
PMMA high heat Polymethylmethacrylate (Acrylic) high heat Non Satisfactory
PMMA Impact modified Polymethylmethacrylate (Acrylic) impact modified Non Satisfactory
PPE Polyphenylene Ether Non Satisfactory
PPE 30% GF Polyphenylene Ether 30% glass fiber Non Satisfactory
PPE FR Polyphenylene Ether flame retardant Non Satisfactory
PPE impact modified Polyphenylene Ether impact modified Non Satisfactory
PPE mineral filled Polyphenylene Ether mineral filled Non Satisfactory
PS 30 % GF Polystyrene 30% glass fiber Non Satisfactory
PS crystal Polystyrene crystal Non Satisfactory
PS high heat Polystyrene high heat Non Satisfactory
PTFE Polytetrafluoroethylene Satisfying
PTFE 25% GF Polytetrafluoroethylene 25% glass fiber Satisfying
PVC 20% GF Polyvinyl Chloride 20% glass fiber Non Satisfactory
PVC plasticized Polyvinyl Chloride plasticized Non Satisfactory
PVC plasticized filled Polyvinyl Chloride plasticized filled Non Satisfactory
PVC rigid Polyvinyl Chloride rigid Non Satisfactory
SAN Styrene Acrylonitrile Non Satisfactory
SAN 20% GF Styrene Acrylonitrile 20% glass fiber Non Satisfactory
Silicon heat sink Silicon heat sink Limited
Silicon RTV bicomponent high hardness Silicon RTV bicomponent high hardness Limited
Silicon RTV bicomponent low hardness Silicon RTV bicomponent low hardness Limited
Silicon stirrable dureté élevée 60/80 ShoreA Silicon stirrable dureté élevée 60/80 ShoreA Limited
Silicon stirrable filled for cables Silicon stirrable filled for cables Limited
Silicon stirrable High temperature cables Silicon stirrable High temperature cables Limited
Silicon stirrable low hardness, shore A 35-50 Silicon stirrable low hardness, shore A 35-50 Limited
Silicone Epoxy modified Silicone Epoxy modified Limited
Silicone pompable conductive black Silicone pompable conductive black Limited
Silicone pumpable low hardness Shore A 20-35 Silicone pumpable low hardness Shore A 20-35 Limited
Silicone pumpable medium hardness Shore A 40/70 Silicone pumpable medium hardness Shore A 40/70 Limited
Silicone resin for electronic Silicone resin for electronic Limited
Silicone RTV expandable foam Silicone RTV expandable foam Limited
Silicone RTV one component high hardness Silicone RTV one component high hardness Limited
Silicone RTV one component low hardness Silicone RTV one component low hardness Limited
TPI-PEEK Blend, Ultra-high heat, Chemical Resistant, High Flow, 240C UL RTI TPI-PEEK Blend, Ultra-high heat, Chemical Resistant, High Flow, 240C UL RTI Limited
UP acrylate urethane 40% aramid fiber UP acrylate urethane 40% aramid fiber Non Satisfactory
UP antistatic charged UP antistatic charged Non Satisfactory
UP BMC 10-20% GF UP BMC 10-20% GF Non Satisfactory
UP BMC 18% GF FR halogen free UP BMC 18% GF FR halogen free Non Satisfactory
UP BMC 22 -28% GF UP BMC 22 -28% GF Non Satisfactory
UP BMC 7% GF UP BMC 7% GF Non Satisfactory
UP Filled FR UP Filled FR Non Satisfactory
UP flexible UP flexible Non Satisfactory
UP FR grade UP FR grade Non Satisfactory
UP FR mineral filled UP FR mineral filled Non Satisfactory
UP low styrene emission UP low styrene emission Non Satisfactory
UP poured electrical grade UP poured electrical grade Non Satisfactory
UP short GF UP short GF Non Satisfactory
UP textile fiber filled UP textile fiber filled Non Satisfactory

Disclaimer: all data and information obtained via the Polymer Selector including but not limited to material suitability, material properties, performances, characteristics and cost are given for information purpose only. Although the data and information contained in the Polymer Selector are believed to be accurate and correspond to the best of our knowledge, they are provided without implied warranty of any kind. Data and information contained in the Polymer Selector are intended for guidance in a polymer selection process and should not be considered as binding specifications. The determination of the suitability of this information for any particular use is solely the responsibility of the user. Before working with any material, users should contact material suppliers in order to receive specific, complete and detailed information about the material they are considering. Part of the data and information contained in the Polymer Selector are genericised based on commercial literature provided by polymer suppliers and other parts are coming from assessments of our experts.

Copyright SpecialChem SA
Back to Top