The Universal Selection Source: Plastics & Elastomers


Gasoline

Chemical resistance of plastics to Gasoline is depending on their ability to keep properties when exposed to this reagent. Traditional chemical degradations encompass aesthetic defects, decomposition, swelling, crazing, cracking, and/or change in mechanical properties such as impact strength, tensile strength and elongation. Chemical Resistance of plastics vary with temperature and reagents concentration. ASTM D543 describes the Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents.

Name of the polymer Explicit name of the polymer Resistivity
Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) Limited
Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) Limited
Amorphous TPI, High Heat, High Flow, Lead-Free Solderable, 30% GF Amorphous TPI, High Heat, High Flow, Lead-Free Solderable, 30% GF Limited
Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) Limited
Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) Limited
Amorphous TPI, Highest heat, Chemical Resistant, 260C UL RTI Amorphous TPI, Highest heat, Chemical Resistant, 260C UL RTI Limited
Amorphous TPI, Moderate Heat, Transparent Amorphous TPI, Moderate Heat, Transparent Limited
Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) Limited
Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) Limited
Amorphous TPI, Moderate Heat, Transparent (Powder form) Amorphous TPI, Moderate Heat, Transparent (Powder form) Limited
CA - Cellulose Acetate Cellulose Acetate Satisfying
Epoxy resin + Aluminium powder Epoxy resin + Aluminium powder Limited
Epoxy resin + silica poured Epoxy resin + silica poured Limited
Epoxy resin 60% graphite Epoxy resin 60% graphite Limited
Epoxy resin long GF Epoxy resin long GF Limited
Epoxy resin pure at T <> Epoxy resin pure at T <> Limited
Epoxy resin pure expanded Epoxy resin pure expanded Limited
Epoxy resin pure expanded FR Epoxy resin pure expanded FR Limited
Epoxy resin pure T=120-140°C Epoxy resin pure T=120-140°C Limited
Epoxy resin pure T=140-180°C Epoxy resin pure T=140-180°C Limited
Epoxy resin short GF and minerals Epoxy resin short GF and minerals Limited
Epoxy resin, expanded, short GF Epoxy resin, expanded, short GF Limited
Epoxy resin, expanded, short GF, FR Epoxy resin, expanded, short GF, FR Limited
Epoxy resin, flexible Epoxy resin, flexible Limited
Epoxy resin, poured, Epoxy resin, poured, Limited
Epoxy resin, poured, mineral filled Epoxy resin, poured, mineral filled Limited
EVA Ethylene Vinyl Acetate Non Satisfactory
Fluorosilicone low hardness Fluorosilicone low hardness Limited
Fluorosilicone, 47 Shore A, hot curing Fluorosilicone, 47 Shore A, hot curing Limited
LCP Liquid Crystal Polymer Satisfying
LCP MINERAL Liquid Crystal Polymer mineral Satisfying
PA 46 Polyamide 46 Satisfying
PA 46 30% GF Polyamide 46 30% glass fiber Satisfying
PA 6 Polyamide 6 Satisfying
PA 66 Polyamide 6-6 Satisfying
PA 66 30% GF Polyamide 6-6 30% glass fiber Satisfying
PAI Polyamide-Imide Satisfying
PAI 30% GF Polyamide-Imide 30% glass fiber Satisfying
PEEK Polyetheretherketone Satisfying
PEEK 30% CF Polyetheretherketone 30% carbon fiber Satisfying
PEEK 30% GF Polyetheretherketone 30% glass fiber Satisfying
PF BMC GF filled PF BMC GF filled Satisfying
PF powder molding, GF filled PF powder molding, GF filled Satisfying
PF powder molding, GF filled, FR V0 Halogen free PF powder molding, GF filled, FR V0 Halogen free Satisfying
PF powder molding, GF filled, Rubber modified PF powder molding, GF filled, Rubber modified Satisfying
PF powder molding, Mica filled PF powder molding, Mica filled Satisfying
PF powder molding, mineral filled PF powder molding, mineral filled Satisfying
PF powder molding, Rubber modified PF powder molding, Rubber modified Satisfying
PF powder molding, Textile filled PF powder molding, Textile filled Satisfying
PF powder molding, wood flour filled PF powder molding, wood flour filled Satisfying
PMP Polymethylpentene Non Satisfactory
PMP 30% GF Polymethylpentene 30% glass fiber Non Satisfactory
PMP mineral filled Polymethylpentene mineral filled Non Satisfactory
POM Polyoxymethylene (acetal) Satisfying
POM low friction Polyoxymethylene (acetal) low friction Satisfying
POM mineral filled Polyoxymethylene (acetal) mineral filled Satisfying
PPS Polyphenylene Sulfide Satisfying
PPS 20-30% GF Polyphenylene Sulfide 20-30% glass fiber Satisfying
PPS 40% GF Polyphenylene Sulfide 40% glass fiber Satisfying
PSU Polysulfone Limited
PSU 30% GF Polysulfone 30% glass fiber Limited
PSU mineral filled Polysulfone mineral filled Limited
PTFE Polytetrafluoroethylene Satisfying
PTFE 25% GF Polytetrafluoroethylene 25% glass fiber Satisfying
PVDF Polyvinylidene Fluoride Satisfying
Silicon heat sink Silicon heat sink Non Satisfactory
Silicon RTV bicomponent high hardness Silicon RTV bicomponent high hardness Non Satisfactory
Silicon RTV bicomponent low hardness Silicon RTV bicomponent low hardness Non Satisfactory
Silicon stirrable dureté élevée 60/80 ShoreA Silicon stirrable dureté élevée 60/80 ShoreA Non Satisfactory
Silicon stirrable filled for cables Silicon stirrable filled for cables Non Satisfactory
Silicon stirrable High temperature cables Silicon stirrable High temperature cables Non Satisfactory
Silicon stirrable low hardness, shore A 35-50 Silicon stirrable low hardness, shore A 35-50 Non Satisfactory
Silicone Epoxy modified Silicone Epoxy modified Non Satisfactory
Silicone pompable conductive black Silicone pompable conductive black Non Satisfactory
Silicone pumpable low hardness Shore A 20-35 Silicone pumpable low hardness Shore A 20-35 Non Satisfactory
Silicone pumpable medium hardness Shore A 40/70 Silicone pumpable medium hardness Shore A 40/70 Non Satisfactory
Silicone resin for electronic Silicone resin for electronic Non Satisfactory
Silicone RTV expandable foam Silicone RTV expandable foam Non Satisfactory
Silicone RTV one component high hardness Silicone RTV one component high hardness Non Satisfactory
Silicone RTV one component low hardness Silicone RTV one component low hardness Non Satisfactory
TPI-PEEK Blend, Ultra-high heat, Chemical Resistant, High Flow, 240C UL RTI TPI-PEEK Blend, Ultra-high heat, Chemical Resistant, High Flow, 240C UL RTI Limited
UP acrylate urethane 40% aramid fiber UP acrylate urethane 40% aramid fiber Satisfying
UP antistatic charged UP antistatic charged Satisfying
UP BMC 10-20% GF UP BMC 10-20% GF Satisfying
UP BMC 18% GF FR halogen free UP BMC 18% GF FR halogen free Satisfying
UP BMC 22 -28% GF UP BMC 22 -28% GF Satisfying
UP BMC 7% GF UP BMC 7% GF Satisfying
UP Filled FR UP Filled FR Satisfying
UP flexible UP flexible Satisfying
UP FR grade UP FR grade Satisfying
UP FR mineral filled UP FR mineral filled Satisfying
UP low styrene emission UP low styrene emission Satisfying
UP poured electrical grade UP poured electrical grade Satisfying
UP short GF UP short GF Satisfying
UP textile fiber filled UP textile fiber filled Satisfying

Disclaimer: all data and information obtained via the Polymer Selector including but not limited to material suitability, material properties, performances, characteristics and cost are given for information purpose only. Although the data and information contained in the Polymer Selector are believed to be accurate and correspond to the best of our knowledge, they are provided without implied warranty of any kind. Data and information contained in the Polymer Selector are intended for guidance in a polymer selection process and should not be considered as binding specifications. The determination of the suitability of this information for any particular use is solely the responsibility of the user. Before working with any material, users should contact material suppliers in order to receive specific, complete and detailed information about the material they are considering. Part of the data and information contained in the Polymer Selector are genericised based on commercial literature provided by polymer suppliers and other parts are coming from assessments of our experts.

Copyright SpecialChem SA
Back to Top