The Universal Selection Source: Plastics & Elastomers


Hydrogen peroxide @ 30%, 60°C

Chemical resistance of plastics to Hydrogen peroxide @ 30%, 60°C is depending on their ability to keep properties when exposed to this reagent. Traditional chemical degradations encompass aesthetic defects, decomposition, swelling, crazing, cracking, and/or change in mechanical properties such as impact strength, tensile strength and elongation. Chemical Resistance of plastics vary with temperature and reagents concentration. ASTM D543 describes the Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents.

Name of the polymer Explicit name of the polymer Resistivity
ABS Acrylonitrile-Butadiene Styrene Non Satisfactory
ABS FR Acrylonitrile-Butadiene Styrene flame retardant Non Satisfactory
ABS High Heat Acrylonitrile-Butadiene Styrene High Heat Non Satisfactory
ABS High Impact Acrylonitrile-Butadiene Styrene High Impact Non Satisfactory
ABS/PC Acrylonitrile-Butadiene Styrene/Polycarbonate Non Satisfactory
ABS/PC 20% GF Acrylonitrile-Butadiene Styrene/Polycarbonate 20% glass fiber Non Satisfactory
ABS/PC FR Acrylonitrile-Butadiene Styrene/Polycarbonate flame retardant Non Satisfactory
Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) Limited
Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) Limited
Amorphous TPI, High Heat, High Flow, Lead-Free Solderable, 30% GF Amorphous TPI, High Heat, High Flow, Lead-Free Solderable, 30% GF Limited
Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) Limited
Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) Limited
Amorphous TPI, Highest heat, Chemical Resistant, 260C UL RTI Amorphous TPI, Highest heat, Chemical Resistant, 260C UL RTI Limited
Amorphous TPI, Moderate Heat, Transparent Amorphous TPI, Moderate Heat, Transparent Limited
Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) Limited
Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) Limited
Amorphous TPI, Moderate Heat, Transparent (Powder form) Amorphous TPI, Moderate Heat, Transparent (Powder form) Limited
CA - Cellulose Acetate Cellulose Acetate Non Satisfactory
EVOH Ethylene Vinyl Alcohol Non Satisfactory
HDPE - High Density Polyethylene HDPE - High Density Polyethylene Satisfying
LDPE - Low Density Polyethylene LDPE - Low Density Polyethylene Limited
LLDPE - Linear Low Density Polyethylene LLDPE - Linear Low Density Polyethylene Limited
PA 66 Polyamide 6-6 Non Satisfactory
PA 66 30% GF Polyamide 6-6 30% glass fiber Non Satisfactory
PA 66 30% mineral filled Polyamide 6-6 30% mineral filled Non Satisfactory
PA 66 IM 15-30% GF Polyamide 6-6 impact modified 15-30% glass fiber Non Satisfactory
PA 66 impact modified Polyamide 6-6 impact modified Non Satisfactory
PE 30% GF Polyethylene 30% glass fiber Satisfying
PI Polyimide Non Satisfactory
POM Polyoxymethylene (acetal) Non Satisfactory
POM impact modified Polyoxymethylene (acetal) impact modified Non Satisfactory
POM low friction Polyoxymethylene (acetal) low friction Non Satisfactory
POM mineral filled Polyoxymethylene (acetal) mineral filled Non Satisfactory
PP 10-20% GF Polypropylene 10-20% glass fiber Limited
PP 10-40% mineral filled Polypropylene 10-40% mineral filled Limited
PP 10-40% TALC Polypropylene 10-40% talc Limited
PP 30-40% GF Polypropylene 30-40% glass fiber Limited
PP copo Polypropylene copolymer Limited
PP homo Polypropylene homopolymer Limited
PP impact modified Polypropylene impact modified Limited
PTFE Polytetrafluoroethylene Satisfying
PTFE 25% GF Polytetrafluoroethylene 25% glass fiber Satisfying
PVC 20% GF Polyvinyl Chloride 20% glass fiber Satisfying
PVC plasticized Polyvinyl Chloride plasticized Satisfying
PVC plasticized filled Polyvinyl Chloride plasticized filled Satisfying
PVC rigid Polyvinyl Chloride rigid Satisfying
TPI-PEEK Blend, Ultra-high heat, Chemical Resistant, High Flow, 240C UL RTI TPI-PEEK Blend, Ultra-high heat, Chemical Resistant, High Flow, 240C UL RTI Limited
XLPE - Crosslinked Polyethylene XLPE - Crosslinked Polyethylene Satisfying

Disclaimer: all data and information obtained via the Polymer Selector including but not limited to material suitability, material properties, performances, characteristics and cost are given for information purpose only. Although the data and information contained in the Polymer Selector are believed to be accurate and correspond to the best of our knowledge, they are provided without implied warranty of any kind. Data and information contained in the Polymer Selector are intended for guidance in a polymer selection process and should not be considered as binding specifications. The determination of the suitability of this information for any particular use is solely the responsibility of the user. Before working with any material, users should contact material suppliers in order to receive specific, complete and detailed information about the material they are considering. Part of the data and information contained in the Polymer Selector are genericised based on commercial literature provided by polymer suppliers and other parts are coming from assessments of our experts.

Copyright SpecialChem SA
Back to Top