The Universal Selection Source: Plastics & Elastomers


Silicone oil @ 20°C

Chemical resistance of plastics to Silicone oil @ 20°C is depending on their ability to keep properties when exposed to this reagent. Traditional chemical degradations encompass aesthetic defects, decomposition, swelling, crazing, cracking, and/or change in mechanical properties such as impact strength, tensile strength and elongation. Chemical Resistance of plastics vary with temperature and reagents concentration. ASTM D543 describes the Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents.

Name of the polymer Explicit name of the polymer Resistivity
ABS Acrylonitrile-Butadiene Styrene Satisfying
ABS FR Acrylonitrile-Butadiene Styrene flame retardant Satisfying
ABS High Heat Acrylonitrile-Butadiene Styrene High Heat Satisfying
ABS High Impact Acrylonitrile-Butadiene Styrene High Impact Satisfying
ABS/PC Acrylonitrile-Butadiene Styrene/Polycarbonate Satisfying
ABS/PC 20% GF Acrylonitrile-Butadiene Styrene/Polycarbonate 20% glass fiber Satisfying
ABS/PC FR Acrylonitrile-Butadiene Styrene/Polycarbonate flame retardant Satisfying
Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) Limited
Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) Limited
Amorphous TPI, High Heat, High Flow, Lead-Free Solderable, 30% GF Amorphous TPI, High Heat, High Flow, Lead-Free Solderable, 30% GF Limited
Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) Limited
Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) Limited
Amorphous TPI, Highest heat, Chemical Resistant, 260C UL RTI Amorphous TPI, Highest heat, Chemical Resistant, 260C UL RTI Limited
Amorphous TPI, Moderate Heat, Transparent Amorphous TPI, Moderate Heat, Transparent Limited
Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) Limited
Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) Limited
Amorphous TPI, Moderate Heat, Transparent (Powder form) Amorphous TPI, Moderate Heat, Transparent (Powder form) Limited
CA - Cellulose Acetate Cellulose Acetate Satisfying
ETFE Ethylene Tetrafluoroethylene Satisfying
EVA Ethylene Vinyl Acetate Limited
EVOH Ethylene Vinyl Alcohol Satisfying
Fluorosilicone low hardness Fluorosilicone low hardness Satisfying
Fluorosilicone, 47 Shore A, hot curing Fluorosilicone, 47 Shore A, hot curing Satisfying
HDPE - High Density Polyethylene HDPE - High Density Polyethylene Satisfying
HIPS - High Impact Polystyrene HIPS - High Impact Polystyrene Satisfying
HIPS FR V0 High Impact Polystyrene flame retardant V0 Satisfying
LDPE - Low Density Polyethylene LDPE - Low Density Polyethylene Satisfying
LLDPE - Linear Low Density Polyethylene LLDPE - Linear Low Density Polyethylene Satisfying
PA 66 Polyamide 6-6 Satisfying
PA 66 30% GF Polyamide 6-6 30% glass fiber Satisfying
PA 66 30% mineral filled Polyamide 6-6 30% mineral filled Satisfying
PA 66 IM 15-30% GF Polyamide 6-6 impact modified 15-30% glass fiber Satisfying
PA 66 impact modified Polyamide 6-6 impact modified Satisfying
PC 20-40% GF Polycarbonate 20-40% glass fiber Satisfying
PC 20-40% GF FR Polycarbonate 20-40% glass fiber flame retardant Satisfying
PC high heat Polycarbonate high heat Satisfying
PE 30% GF Polyethylene 30% glass fiber Satisfying
PET Polyethylene Terephtalate Satisfying
PET 30% GF Polyethylene Terephtalate 30% glass fiber Satisfying
PET 30/35% GF Impact modified Polyethylene Terephtalate 30/35% glass fiber impact modified Satisfying
PET G Polyethylene Terephtalate Glycol Satisfying
PI Polyimide Satisfying
PMMA Polymethylmethacrylate (Acrylic) Limited
PMMA high heat Polymethylmethacrylate (Acrylic) high heat Limited
PMMA Impact modified Polymethylmethacrylate (Acrylic) impact modified Limited
POM Polyoxymethylene (acetal) Limited
POM impact modified Polyoxymethylene (acetal) impact modified Limited
POM low friction Polyoxymethylene (acetal) low friction Limited
POM mineral filled Polyoxymethylene (acetal) mineral filled Limited
PP 10-20% GF Polypropylene 10-20% glass fiber Satisfying
PP 10-40% mineral filled Polypropylene 10-40% mineral filled Satisfying
PP 10-40% TALC Polypropylene 10-40% talc Satisfying
PP 30-40% GF Polypropylene 30-40% glass fiber Satisfying
PP copo Polypropylene copolymer Satisfying
PP homo Polypropylene homopolymer Satisfying
PP impact modified Polypropylene impact modified Satisfying
PS 30 % GF Polystyrene 30% glass fiber Satisfying
PS crystal Polystyrene crystal Satisfying
PS high heat Polystyrene high heat Satisfying
PSU Polysulfone Satisfying
PSU 30% GF Polysulfone 30% glass fiber Satisfying
PSU mineral filled Polysulfone mineral filled Satisfying
PTFE Polytetrafluoroethylene Satisfying
PTFE 25% GF Polytetrafluoroethylene 25% glass fiber Satisfying
Silicon heat sink Silicon heat sink Limited
Silicon RTV bicomponent high hardness Silicon RTV bicomponent high hardness Limited
Silicon RTV bicomponent low hardness Silicon RTV bicomponent low hardness Limited
Silicon stirrable dureté élevée 60/80 ShoreA Silicon stirrable dureté élevée 60/80 ShoreA Limited
Silicon stirrable filled for cables Silicon stirrable filled for cables Limited
Silicon stirrable High temperature cables Silicon stirrable High temperature cables Limited
Silicon stirrable low hardness, shore A 35-50 Silicon stirrable low hardness, shore A 35-50 Limited
Silicone Epoxy modified Silicone Epoxy modified Limited
Silicone pompable conductive black Silicone pompable conductive black Limited
Silicone pumpable low hardness Shore A 20-35 Silicone pumpable low hardness Shore A 20-35 Limited
Silicone pumpable medium hardness Shore A 40/70 Silicone pumpable medium hardness Shore A 40/70 Limited
Silicone resin for electronic Silicone resin for electronic Limited
Silicone RTV expandable foam Silicone RTV expandable foam Limited
Silicone RTV one component high hardness Silicone RTV one component high hardness Limited
Silicone RTV one component low hardness Silicone RTV one component low hardness Limited
TPI-PEEK Blend, Ultra-high heat, Chemical Resistant, High Flow, 240C UL RTI TPI-PEEK Blend, Ultra-high heat, Chemical Resistant, High Flow, 240C UL RTI Limited
UP acrylate urethane 40% aramid fiber UP acrylate urethane 40% aramid fiber Satisfying
UP antistatic charged UP antistatic charged Satisfying
UP BMC 10-20% GF UP BMC 10-20% GF Satisfying
UP BMC 18% GF FR halogen free UP BMC 18% GF FR halogen free Satisfying
UP BMC 22 -28% GF UP BMC 22 -28% GF Satisfying
UP BMC 7% GF UP BMC 7% GF Satisfying
UP Filled FR UP Filled FR Satisfying
UP flexible UP flexible Satisfying
UP FR grade UP FR grade Satisfying
UP FR mineral filled UP FR mineral filled Satisfying
UP low styrene emission UP low styrene emission Satisfying
UP poured electrical grade UP poured electrical grade Satisfying
UP short GF UP short GF Satisfying
UP textile fiber filled UP textile fiber filled Satisfying
XLPE - Crosslinked Polyethylene XLPE - Crosslinked Polyethylene Satisfying

Disclaimer: all data and information obtained via the Polymer Selector including but not limited to material suitability, material properties, performances, characteristics and cost are given for information purpose only. Although the data and information contained in the Polymer Selector are believed to be accurate and correspond to the best of our knowledge, they are provided without implied warranty of any kind. Data and information contained in the Polymer Selector are intended for guidance in a polymer selection process and should not be considered as binding specifications. The determination of the suitability of this information for any particular use is solely the responsibility of the user. Before working with any material, users should contact material suppliers in order to receive specific, complete and detailed information about the material they are considering. Part of the data and information contained in the Polymer Selector are genericised based on commercial literature provided by polymer suppliers and other parts are coming from assessments of our experts.

Copyright SpecialChem SA
Back to Top