The Universal Selection Source: Plastics & Elastomers


Soap @ 60°C

Chemical resistance of plastics to Soap @ 60°C is depending on their ability to keep properties when exposed to this reagent. Traditional chemical degradations encompass aesthetic defects, decomposition, swelling, crazing, cracking, and/or change in mechanical properties such as impact strength, tensile strength and elongation. Chemical Resistance of plastics vary with temperature and reagents concentration. ASTM D543 describes the Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents.

Name of the polymer Explicit name of the polymer Resistivity
Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (High Flow) Limited
Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) Amorphous TPI Blend, Ultra-high heat, Chemical Resistant (Standard Flow) Limited
Amorphous TPI, High Heat, High Flow, Lead-Free Solderable, 30% GF Amorphous TPI, High Heat, High Flow, Lead-Free Solderable, 30% GF Limited
Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (High Flow) Limited
Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) Amorphous TPI, High Heat, High Flow, Transparent, Lead-Free Solderable (Standard Flow) Limited
Amorphous TPI, Highest heat, Chemical Resistant, 260C UL RTI Amorphous TPI, Highest heat, Chemical Resistant, 260C UL RTI Limited
Amorphous TPI, Moderate Heat, Transparent Amorphous TPI, Moderate Heat, Transparent Limited
Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) Amorphous TPI, Moderate Heat, Transparent (Food Contact Approved) Limited
Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) Amorphous TPI, Moderate Heat, Transparent (Mold Release grade) Limited
Amorphous TPI, Moderate Heat, Transparent (Powder form) Amorphous TPI, Moderate Heat, Transparent (Powder form) Limited
PET Polyethylene Terephtalate Limited
PET 30% GF Polyethylene Terephtalate 30% glass fiber Limited
PET 30/35% GF Impact modified Polyethylene Terephtalate 30/35% glass fiber impact modified Limited
PET G Polyethylene Terephtalate Glycol Limited
PTFE Polytetrafluoroethylene Satisfying
PTFE 25% GF Polytetrafluoroethylene 25% glass fiber Satisfying
PVC 20% GF Polyvinyl Chloride 20% glass fiber Limited
PVC plasticized Polyvinyl Chloride plasticized Limited
PVC plasticized filled Polyvinyl Chloride plasticized filled Limited
PVC rigid Polyvinyl Chloride rigid Limited
TPI-PEEK Blend, Ultra-high heat, Chemical Resistant, High Flow, 240C UL RTI TPI-PEEK Blend, Ultra-high heat, Chemical Resistant, High Flow, 240C UL RTI Limited

Disclaimer: all data and information obtained via the Polymer Selector including but not limited to material suitability, material properties, performances, characteristics and cost are given for information purpose only. Although the data and information contained in the Polymer Selector are believed to be accurate and correspond to the best of our knowledge, they are provided without implied warranty of any kind. Data and information contained in the Polymer Selector are intended for guidance in a polymer selection process and should not be considered as binding specifications. The determination of the suitability of this information for any particular use is solely the responsibility of the user. Before working with any material, users should contact material suppliers in order to receive specific, complete and detailed information about the material they are considering. Part of the data and information contained in the Polymer Selector are genericised based on commercial literature provided by polymer suppliers and other parts are coming from assessments of our experts.

Copyright SpecialChem SA
Back to Top