The Universal Selection Source: Plastics & Elastomers

by SpecialChem

DuraGrip® 6140NC

Technical DataSheet | Supplied by A. Schulman

DuraGrip® 6140NC by A. Schulman is a natural and black colored thermoplastic elastomer (TPE) grade. Possesses an excellent soft touch feel, good colorability and melt processability. It chemically bonds to acrylonitrile butadiene styrene (ABS), polycarbonate (PC), nylon 6, nylon 6/6, glass filled nylon, acrylonitrile styrene acrylate (ASA), PC/ABS alloys, polybutylene terephthalate (PBT) and PC/PBT alloys. Is suitable for processing by injection molding and extrusion. Possible applications of DuraGrip® 6140NC include automotive, sports & recreation, tools & appliances, consumer electronics, architectural, lawn & garden, wire & cable, consumer and industrial products.

DuraGrip® 6140NC Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Appearance
Natural, Black
Product Status
xxxxxxxxxx
Applications/ Recommended for
  • Appliances
  • Automotive
  • xxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxx
Key Features
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxx

DuraGrip® 6140NC Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Specific Gravity (Density)
1.04
ISO 2781
Viscocity
354 Pa-sec
( 300 s-1 at 374°F (190°C) )
ASTM D3835
Molding Shrinkage
xxx %
xxxxxxxxxx
Molding Shrinkage
xxx %
xxxxxxxxxx
Molding Shrinkage
xxx %
xxxxxxxxxx

Hardness Properties

Value & Unit
Test Condition
Test Method
Durometer Hardness (Shore)
xx
xxxxxxxxxx
xxxxxx

Elastomers Properties

Value & Unit
Test Condition
Test Method
Tensile Modulus
xxx psi
xxxxxxxxxx
xxxxxx
Tensile Strength
xxx psi
xxxx
xxxxxx
Tensile Elongation
xxx %
xxxxxxxxxx
xxxxxx
Tear Strength
xxx lb/in
xxxxxxxxxx
xxxxxxxxx
Permanent Set
xxx %
xxxxxxxxxx
xxxxxxxxx
Compression Set
xx %
xxxxxxxxxx
xxxxxxx
Compression Set
xx %
xxxxxxxxxx
xxxxxxx
Compression Set
xx %
xxxxxxxxxx
xxxxxxx

Aging Properties

Value & Unit
Test Condition
Test Method
Change in Tensile Modulus
xx %
xxxxxxxxxx
xxxxxx
Change in Tensile Strength
xx %
xxxxxxxxxx
xxxxxx
Change in Tensile Elongation
xx %
xxxxxxxxxx
xxxxxx
Change in Tensile Modulus
xx %
xxxxxxxxxx
xxxxxx
Change in Tensile Strength
xxx %
xxxxxxxxxx
xxxxxx
Change in Tensile Elongation
xxx %
xxxxxxxxxx
xxxxxx
Volume Change in Fluid Resistance
x %
xxxxxxxxxx
xxxxxxxx
Volume Change in Fluid Resistance
xx %
xxxxxxxxxx
xxxxxxxx
Volume Change in Fluid Resistance
xxx %
xxxxxxxxxx
xxxxxxxx
Volume Change in Fluid Resistance
xxx %
xxxxxxxxxx
xxxxxxxx

Thermal Properties

Value & Unit
Test Condition
Test Method
Brittleness Low Temperature
xxx °F
xxxxxxx

Mechanical Properties

Value & Unit
Test Condition
Test Method
Taber Abrasion resistance
xxxx g/1000 cycles
xxxxxxxxxx
xxxxxxxxxx

DuraGrip® 6140NC Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Rear Temperature
xxxxxxxxx °F
Middle Temperature
xxxxxxxxx °F
Front Temperature
xxxxxxxxx °F
Nozzle Temperature
xxxxxxxxx °F
Melt Temperature
xxxxxxxxx °F
Mold Temperature
xxxxxxxxx °F
Injection Pressure
xxxxxxxxx psi
Injection Speed
xxxxx cu.in/sec
Injection Time (boost)
xxxxxxx sec
Second Stage Pressure
xxxxxxxxx psi
Second Stage Time
xxxxxx sec
Cooling Time
xxxxxxx sec
Screw Speed
xxxxxxxx rpm
Back Pressure
xxxxxxx %
Drying Temperature (Desiccant dryer)
xxx °F
Drying Time (Desiccant dryer)
x hr
Suggested Max. Regrind
xx %
Processing Temperature
xxx °F
Last edited Nov 29, 2016
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Resirene CET
Back to Top