The Universal Selection Source: Plastics & Elastomers

by SpecialChem

Pebax® Rnew 40R53 SP 01

Technical DataSheet | Supplied by Arkema

Polyether block amide. It is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources (44-48%). This SP grade has been developed to be heat and UV resistant. Made up of block copolymers consisting of a sequence of polyamide 11 and polyether segments. Offers significant flexibility in a wide range of applications. Exhibits high chemical resistance as well as low density. Can be used pure, as an additive or in blends with other polymers or rubbers. Can also be reinforced with various fillers. Delivered dried in sealed packaging ready to be processed. Drying is only necessary for bags opened for more than 2 hours.

Pebax® Rnew 40R53 SP 01 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Physical Form
Pellets
Product Status
xxxxxxxxxx
Applications/ Recommended for
  • Extrusion
  • Injection molding - thermoplastics
Bio Based
xxx
Bio Based Content (%)
xxxxx
Filled with Bio Fillers
xx
Key Features
  • xxxxxxxxxxx
  • xxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxx

Pebax® Rnew 40R53 SP 01 Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Specific Gravity (Density)
1.03 g/cm³
ISO 1183
Water Absorption
0.5 %
( 23°C, 50 % RH )
ISO 62
Water Absorption
xxx %
xxxxxxxxxx
xxxxxx
Molding Shrinkage
xxx %
xxxxxxxxxx
xxxxxxxxxx
Molding Shrinkage
xxx %
xxxxxxxxxx
xxxxxxxxxx

Thermal Properties

Value & Unit
Test Condition
Test Method
Melting Temperature (Melting Point)
xxx °C
xxxxxxxxx
Vicat Softening Temperature
xxx °C
xxxxxxxxxx
xxxxxxx

Hardness Properties

Value & Unit
Test Condition
Test Method
Durometer Hardness (Shore)
xx Shore D
xxxxxxxxxx
xxxxxxx
Durometer Hardness (Shore)
xx Shore D
xxxxxxxxxx
xxxxxxx

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Strength (Tensile Stress)
xx MPa
xxxxxxxxxx
xxxxxxx
Tensile Elongation
xxxxx %
xxxxxxxxxx
xxxxxxx
Flexural Modulus (Stiffness)
xx MPa
xxxx
xxxxxxx

Impact Properties

Value & Unit
Test Condition
Test Method
Charpy Unnotched Impact Strength
xxxxxxxx kJ/m²
xxxx
xxxxxxx
Charpy Unnotched Impact Strength
xxxxxxxx kJ/m²
xxxxx
xxxxxxx
Charpy V-Notched Impact Strength
xxxxxxxx kJ/m²
xxxx
xxxxxxx
Charpy V-Notched Impact Strength
xxxxxxxx kJ/m²
xxxxx
xxxxxxx

Pebax® Rnew 40R53 SP 01 Processing Guidelines

Extrusion Properties

Value & Unit
Test Condition
Test Method
Drying Temperature
xxxxxxx °C
Drying Time
xxxxx hr
Temperature
xxxxxxxxx °C
Temperature
xxx °C

Injection Properties

Value & Unit
Test Condition
Test Method
Drying Temperature
xxxxxxxxx °C
Temperature
xxxxxxxxx °C
Drying Time
xxxxx hr
Temperature
xxx °C
Mold Temperature
xxxxxxx °C
Last edited Dec 29, 2016
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Back to Top