The Universal Selection Source: Plastics & Elastomers

by SpecialChem

Cellidor® B 500-20

Technical DataSheet | Supplied by Albis

Cellulose acetate butyrate. Has 20% plasticizer content/extractable contents. It is an organic, thermoplastic cellulose ester which consists of approximately 45% cellulose, a renewable natural material. This means that, unlike traditional plastics, it is only partially dependent on finite fossil fuel resources. Offers pleasantly warm and soft surface, a self-polishing effect as well as an almost unlimited range of possible colors. Possesses high tensile strength, excellent light transmission and skin perspiration resistance. Used in tool handles and steering wheels.

Cellidor® B 500-20 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Product Status
xxxxxxxxxx
Geographical Availability
xxxxxxxxxxxxxxxxxxxxxxxxx
Applications/ Recommended for
  • Automotive > Internal - Steering wheel
  • Tool handles
  • xxxxxxxxxxxxxxxxxxxxxxxxx
Bio Based
xxx
Bio Based Content (%)
xx
Key Features
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxx
  • xxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxx

Cellidor® B 500-20 Properties

Electrical Properties

Value & Unit
Test Condition
Test Method
Volume Resistivity
xxxx ohm·cm
xxxx
xxxxxxxxx
Surface Resistivity
xxxx ohm
xxxx
xxxxxxxxx

Physical Properties

Value & Unit
Test Condition
Test Method
Specific Gravity (Density)
1.17 g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR)
40 cm³/10 min
( 210/2.16 )
ISO 1133

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Modulus
xxx MPa
xxxxx
xxxxxxx
Tensile Strength (Tensile Stress)
xx MPa
xxxxxxxxxx
xxxxxxx
Tensile Strain
xxx %
xxxxxxxxxx
xxxxxxx
Tensile Strength (Tensile Stress)
xx MPa
xxxxxxxxxx
xxxxxxx
Nominal Tensile Strain at Break
xx %
xxxxx
xxxxxxx
Flexural Strength
xx MPa
xxxxxxxxxx
xxxxxxx

Impact Properties

Value & Unit
Test Condition
Test Method
Charpy Unnotched Impact Strength
xxx kJ/m²
xxxxxxxxxx
xxxxxxxxxx
Charpy Notched Impact Strength
xx kJ/m²
xxxxxxxxxx
xxxxxxxxxx

Hardness Properties

Value & Unit
Test Condition
Test Method
Ball Indentation Hardness
xx MPa
xxxxxxxxxx
xxxxxxxxxx

Thermal Properties

Value & Unit
Test Condition
Test Method
Heat Deflection Temperature Under Load (HDT)
xx °C
xxxxxxxxxx
xxxxxxxx
Vicat Softening Temperature
xx °C
xxxxxxxx
xxxxxxxxxx

Cellidor® B 500-20 Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Processing (Melt) Temp
xxxxxxxxx °C
Mold Temperature
xxxxxxx °C
Last edited Dec 29, 2016
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Resirene CET
Back to Top