The Universal Selection Source: Plastics & Elastomers

by SpecialChem

Bioplast® 200

Technical DataSheet | Supplied by Biotec

New, plasticizers free thermoplastic material. Therefore, there are no up or steam by softening during processing of BIOPLAST 200. The material is suitable for blown film, cast film extrusion, profile extrusion and injection molding of completely biodegradable products. In BIOPLAST 200 potato starch used is not, such as in thermoplastic starch (TPS) is required, treated with plasticizer, but in the original, native state incorporated into the material. The film made of BIOPLAST 200 is completely biodegradable, resistant to oil, grease, fuel and water. Has a soft touch and is colored with masterbatches. Used in carrier bags, garbage bags, perishable consumer goods for fast food disposable packaging, molding products, injection molded products, products for horticulture, packaging and tubes.

Bioplast® 200 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Physical Form
Pellets
Product Status
xxxxxxxxxx
Geographical Availability
xxxxxxxxxxxxxxxxxxxxxxxxx
Applications/ Recommended for
  • Packaging
  • Households products/ Consumer Goods
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
Biodegradable
xxx
Bio Based
xxx
Bio Based Content Comments
Potato starch
Key Features
  • xxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxx
  • xxxx

Bioplast® 200 Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)
2.4 g/10min
( 190°C/2.16 kg )
ISO 1133
Grain Diameter
2.5 mm
Calliper
Density
xxxx g/cm3
xxxxxxxxxx
Water Content
xxx %
xxxxxxxxxx
Melt Density
xxxx g/cm3
Apparent Density
xxx kg/m³
xxxxxx

Films Properties

Value & Unit
Test Condition
Test Method
Film Thickness
xxxx microns
xxxxxxxxxx
Tensile Strength (Tensile Stress), longitudinal
xx MPa
xxxxxxxxxx
xxxxxxxxx
Tensile Strength (Tensile Stress), transverse
xx MPa
xxxxxxxxxx
xxxxxxxxx
(Tensile) Elongation-along
xxx %
xxxxxxxxx
(Tensile) Elongation
xxx %
xxxxxxxx
xxxxxxxxx
Last edited Dec 29, 2016
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Back to Top