The Universal Selection Source: Plastics & Elastomers

by SpecialChem

PDLA D070

Technical DataSheet | Supplied by Corbion (Purac Group)

PDLA D070 by Corbion Purac Group is a general purpose, bio-based, nucleated PLA homopolymer grade. Exhibits good heat resistance with excellent mechanical properties and a reduced processing cycle time. Designed for injection molding. PDLA D070 typical nucleated formulations should include 3-7% PDLA.

PDLA D070 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxx
Product Status
xxxxxxxxxx
Applications/ Recommended for
Injection molding - thermoplastics
Bio Based
xxx
Key Features
  • xxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxx
  • xxxxxxxxxxxxxxxx
  • xxxxxxxxx

PDLA D070 Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Specific Gravity (Density)
1.24 g/cm³
Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)
> 75 g/10min
( 210°C/ 2.16 kg )
ISO 1133-A

Thermal Properties

Value & Unit
Test Condition
Test Method
Melting Temperature (Melting Point)
xxx °C
xxx
Glass Transition Temperature
xx °C
xxx
Heat Deflection Temperature Under Load (HDT)
xxxxxxx °C
xxxxxxxxx
xxxxxxxx

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Modulus
xxxx MPa
xxxxxxxxx
Tensile Strength (Tensile Stress)
xx MPa
xxxxxxxxx
Tensile Elongation
xxx %
xxxxxx
xxxxxxxxx

Impact Properties

Value & Unit
Test Condition
Test Method
Charpy Notched Impact Strength
xxx kJ/m²
xxxx
xxxxxxxxxx
Last edited Nov 29, 2016
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Resirene CET
Back to Top