The Universal Selection Source: Plastics & Elastomers

by SpecialChem

Novodur® SBM-90

Technical DataSheet | Supplied by INEOS Styrolution Group

Novodur® SBM-90 by INEOS Styrolution Group is a styrene-methylmethacrylate/methylmethacrylate-butadiene-styrene grade. Exhibits easy processability, high aesthetic & colourful surface appearance, good dimensional stability and heat resistance. Is suitable for processing by injection molding. Novodur® SBM-90 is recommended for showerhead. Is approved for contact with drinking water.

Novodur® SBM-90 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Product Launch Date
xxxxxxxxxxxx
Product Status
xxxxxxxxxx
Applications/ Recommended for
  • Buildings & constructions > Bathrooms & Sanitary
  • Injection molding - thermoplastics
Key Features
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxx

Novodur® SBM-90 Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Specific Gravity (Density)
1060 kg/m³
ISO 1183
Melt Mass-Volume Rate (MVR)
15 cm³/10min
( 220°C, 10 kg )
ISO 1133
Molding Shrinkage
xxxxxxxxx %
xxxxxxxxx

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Modulus
xxxx MPa
xxxxxxx
Tensile Stress (Tensile Strength)
xx MPa
xxxxxxxx
xxxxxxx
Tensile Strain
xxx %
xxxxxxx
Tensile Strain
xxxx %
xxxxxxxx
xxxxxxx
Flexural Strength
xx MPa
xxxxxxx

Impact Properties

Value & Unit
Test Condition
Test Method
Charpy Unnotched Impact Strength
xxx kJ/m2
xxxx
xxxxxxxxxx
Charpy Unnotched Impact Strength
xx kJ/m2
xxxxx
xxxxxxxxxx
Charpy Notched Impact Strength
xx kJ/m2
xxxxxxxxxx
Charpy Notched Impact Strength
x kJ/m2
xxxxx
xxxxxxxxxx
Izod Notched Impact
xx kJ/m2
xxxx
xxxxxxxxx
Izod Notched Impact
x kJ/m2
xxxxx
xxxxxxxxx

Hardness Properties

Value & Unit
Test Condition
Test Method
Ball Indentation Hardness
xx MPa
xxxxxxxxxx
xxxxxxxxxx

Thermal Properties

Value & Unit
Test Condition
Test Method
Heat Deflection Temperature Under Load (HDT)
xx °C
xxxxxxxxxx
xxxxxxxxxx
Heat Deflection Temperature Under Load (HDT)
xx °C
xxxxxxxxxx
xxxxxxxxxx
Vicat Softening Temperature
xx °C
xxxxxxxx
xxxxxxx
Vicat Softening Temperature
xx °C
xxxxxxxxx
xxxxxxx

Novodur® SBM-90 Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Melt Temperature
xxxxxxxxx °C
Mold Temperature
xxxxxxx °C
Last edited Oct 17, 2016
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Resirene CET
Back to Top