The Universal Selection Source: Plastics & Elastomers

by SpecialChem

TORZEN® HV360AHSL NC01

Technical DataSheet | Supplied by Invista Engineering Polymer Solutions

TORZEN® HV360AHSL NC01 is a very high viscosity, heat stabilized, lubricated PA (polyamide) 66 grade. Available in natural and black color. Exhibits wear resistance, durability, fast & consistent crystallization and toughness. Also exhibits resistance to many solvents, oils and chemicals. Possesses stable melt viscosity allowing wide processing window. It can be processed using injection molding and extrusion. Suitable for monofilaments (brushes & fishing line), cast & high-strength multilayer films, stock shapes, rods through extrusion, gears, chain tensioners and rail isolators. No intentional additives or ingredients used in TORZEN® HV360AHSL NC01 are among those in the European directive 2011/65/EC (RoHs2), as amended.

TORZEN® HV360AHSL NC01 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Appearance
Natural and black
Product Launch Date
xxxxxxxxxxxx
Product Status
xxxxxxxxxx
Geographical Availability
xxxxxxxxxxxxxxxxxxxxxxxxx
Applications/ Recommended for
  • Gears
  • Injection molding - thermoplastics
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxx
Labels/Agency Rating
xxxx
Key Features
  • xxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxx
  • xxxxxxxxxxxxxxx
  • xxxxxxxxxx
  • xxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxx
  • xxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxx

TORZEN® HV360AHSL NC01 Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Viscosity (RV in formic acid, nominal)
360
ASTM D789
Viscosity (VN at 0.5% in sulfuric acid, nominal)
330 ml/g
ISO 307
Viscosity (RV at 1% in sulfuric acid, nominal)
xxx
Density
xxxx g/cm3
xxxxxxxx
Molding Shrinkage
x %
xxxxxxxxxx
xxxxxxxxx
Molding Shrinkage
xxx %
xxxxxxxxxx
xxxxxxxxx
Water Absorption
xxx %
xxxxxxxxxx
xxxxxx

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Strength (Tensile Stress)
xx MPa
xxxxxxxxxx
xxxxxxx
Tensile Elongation
xxx %
xxxxxxxx
xxxxxxx
Tensile Elongation
xx %
xxxxxxxxxx
xxxxxxx
Tensile Modulus
xxxx MPa
xxxxxxxxxx
xxxxxxx
Flexural Modulus (Stiffness)
xxxx MPa
xxxx
xxxxxxx
Flexural Strength
xx MPa
xxxx
xxxxxxx

Impact Properties

Value & Unit
Test Condition
Test Method
Charpy Notched Impact Strength
xxx kJ/m²
xxxx
xxxxxxx
Charpy Notched Impact Strength
x kJ/m²
xxxxx
xxxxxxx
Charpy Unnotched Impact Strength
xx kJ/m²
xxxx
xxxxxxx
Charpy Unnotched Impact Strength
xx kJ/m²
xxxxx
xxxxxxx
Notched Izod Impact
x kJ/m²
xxxx
xxxxxxx

Thermal Properties

Value & Unit
Test Condition
Test Method
Melting Temperature (Melting Point)
xxx °C
xxxxxxxx
xxxxxxxxx
Heat Deflection Temperature Under Load (HDT)
xxx °C
xxxxxxxx
xxxxxx
Heat Deflection Temperature Under Load (HDT)
xx °C
xxxxxxxx
xxxxxx

TORZEN® HV360AHSL NC01 Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Drying Temperature
xx °C
Drying Time
xxxxx hours
Rear Temperature
xxxxxxxxx °C
Middle Temperature
xxxxxxxxx °C
Front Temperature
xxxxxxxxx °C
Nozzle Temperature
xxxxxxxxx °C
Processing (Melt) Temp
xxxxxxxxx °C
Mold Temperature
xxxxxxx °C
Back Pressure (Melt Pressure)
xxxxxx bar
Vent Depth
xxxxxxxxxx mm
Cushion (range)
xxxxx mm
Suggested Max Moisture
xxxx wt%
Suggested Min Moisture
xxxx wt%
Screw Speed
xxxxxxxx rpm
Last edited Dec 16, 2016
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Resirene CET
Back to Top