The Universal Selection Source: Plastics & Elastomers

by SpecialChem

XEBRID® 21-C10-G10

Technical DataSheet | Supplied by Xenia

XEBRID® 21-C10-G10 by Xenia is a polyamide 12 (PA 12, Nylon 12) grade reinforced with 10% carbon fiber and 10% glass fiber. Exhibits good lightness & mechanical properties and good processability. It can be used to replace metal to optimize cost, performance and process technologies. Is suitable for processing by injection molding. Potential applications could be industrial and agricultural equipment, oil & gas and construction. Other applications of XEBRID® 21-C10-G10 can be sporting equipment, mobility & transportation and aeronautics.

XEBRID® 21-C10-G10 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Product Launch Date
xxxxxxxxxxxx
Product Status
xxxxxxxxxx
Applications/ Recommended for
  • Engineering / manufacturing
  • Sports & Leisures
  • xxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
Key Features
  • xxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxx

XEBRID® 21-C10-G10 Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Specific Gravity (Density)
1.13 g/cm³
ISO 1183

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Modulus
xxxx MPa
xxxxxxxx
xxxxxxx
Tensile Strength (Tensile Stress)
xxx MPa
xxxxxxxxxx
xxxxxxx
Tensile Elongation
xxx %
xxxxxxxxxx
xxxxxxx
Flexural Modulus (Stiffness)
xxxx MPa
xxxxxxxx
xxxxxxx
Flexural Strength
xxx MPa
xxxxxxxx
xxxxxxx

Impact Properties

Value & Unit
Test Condition
Test Method
Notched Izod Impact
xx kJ/m²
xxxxxxxxxx
xxxxxxx
Unnotched Izod Impact
xx kJ/m²
xxxxxxxxxx
xxxxxxx
Notched Izod Impact
xx kJ/m²
xxxxx
xxxxxxx
Unnotched Izod Impact
xx kJ/m²
xxxxx
xxxxxxx

Thermal Properties

Value & Unit
Test Condition
Test Method
Heat Deflection Temperature Under Load (HDT)
xxx °C
xxxxxxxxxx
xxxxxx
Vicat Softening Temperature
xxx °C
xxxxxxxxxx
xxxxxxx

XEBRID® 21-C10-G10 Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Drying Temperature (Desiccant Dryer)
xxxxxxxx °C
Drying Time (Desiccant Dryer)
xxxxx hr
Processing (Melt) Temp
xxxxxxxxx °C
Mold Temperature
xxxxxxx °C
Last edited Mar 27, 2017
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Back to Top