The Universal Selection Source: Plastics & Elastomers

by SpecialChem
49 products match your search
Product Name
Supplier
Description
Fluon® ETFE C88AXMP-HT by AGC is a light weight, ultra heat-resistant ETFE grade. It is 20% less dense than fluorinated ethylene propylene (FEP), which reduces the amount of product required for... view more
Applications
  • Wiring & Cables
  • Extrusion>Cables
Features
  • ESCR High Stress Crack Resist
  • Processability Good
Celapex™ PKX-102 by Celanese is a high flow polyetheretherketone [PEEK] grade. Exhibits low warpage, high heat resistance, easy processability and molding at lower injection pressure & lower melt... view more
Applications
  • Automotive
  • Electrical markets>Connectors
  • Electrical markets>Switches
  • Electronics / Computers>Electronic components (capacitors...)
  • ...
Features
  • Flow High
  • Heat Resistance High
  • Processability Good
  • Warpage Low
Celapex™ PKX-201 by Celanese is a high flow polyetheretherketone [PEEK] grade reinforced with 30% glass fiber. Exhibits low warpage, high heat resistance, easy processability and molding at lower... view more
Applications
  • Electronics / Computers>Electronic components (capacitors...)
  • Engineering / manufacturing
  • Sealants, seals & gaskets
  • Automotive
  • ...
Features
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • Processability Good
  • ...
ForTii® Ace by DSM is a high performance polyphthalamide (PPA) grade based on 4T chemistry. It has highest aromatic content of >50wt%. Possesses extreme stiffness, strength up to 150°C, high peak... view more
Applications
  • Automotive
  • Electronics / Computers
  • Extrusion>Fibres
  • Extrusion>Tapes/ Stripes
  • ...
Features
  • Acid Resistant
  • Chemical resistance Good
  • Crystalinity High
  • Heat Resistance High
  • ...
ForTii® Eco E11 by DSM is a bio-based, high temperature soldering resistant, high performance polyamide grade. Partially produced from renewable resources and castor beans as the basis for C10... view more
Applications
  • Electrical markets>Connectors
Features
  • Flow High
  • Halogen Free
  • Heat Resistance High
  • Moisture Absorption Low
  • ...
ForTii® Eco E61 by DSM is a bio-based, high temperature soldering resistant, high performance polyamide grade. Partially produced from renewable resources and castor beans as the basis for C10... view more
Applications
  • Electrical markets>Connectors
Features
  • Flow High
  • Halogen Free
  • Heat Resistance High
  • Moisture Absorption Low
  • ...
ForTii® Eco LDS62 by DSM is a bio-based, high temperature soldering resistant, high performance polyamide grade. Partially produced from renewable resources and castor beans as the basis for C10... view more
Applications
  • Telecom>Antennas
  • Electrical markets>Switches
Features
  • Flow High
  • Halogen Free
  • Heat Resistance High
  • Moisture Absorption Low
  • ...
Zytel® HTNFR52G20NH NC010 by DuPont™ is a high-performance, readily colorable, non-halogenated, flame retardant PPA resin reinforced with 20% glass. Contains lubricants and release agent. It... view more
Applications
  • Electrical markets>Connectors
  • Injection molding - thermoplastics>Overmolding
Features
  • Colorability Good
  • Dimensional stability Good
  • Filled
  • Flame retarded Halogen free
  • ...
Zytel® HTNFR52G30NH BK337 by DuPont™ is a high-performance, readily colorable, non-halogenated, flame retardant PPA resin reinforced with 30% glass. It exhibits very high flow performance... view more
Applications
  • Electrical markets>Connectors
  • Injection molding - thermoplastics>Overmolding
Features
  • Colorability Good
  • Dimensional stability Good
  • Filled
  • Flame retarded Halogen free
  • ...
Zytel® HTNFR52G30NH NC010 by DuPont™ is a high-performance, readily colorable, non-halogenated, flame retardant PPA resin reinforced with 30% glass. Contains lubricants and release agent. It... view more
Applications
  • Electrical markets>Connectors
  • Injection molding - thermoplastics>Overmolding
Features
  • Colorability Good
  • Dimensional stability Good
  • Filled
  • Flame retarded Halogen free
  • ...
Zytel® XT70G35HSL by DuPont is a high temperature polyamide 66 and polyamide 6 copolymer reinforced with 35% glass fiber. Provides mechanical properties at a continuous temperature upto 200˚C, with... view more
Applications
  • Automotive
  • Injection molding - thermoplastics
Features
  • Copolymer
  • Filled Glass Fiber
  • Processability Good
  • Stiffness Good
Zytel® XT70G50HSL by DuPont is a high temperature polyamide 66 and polyamide 6 copolymer reinforced with 50% glass fiber. Provides mechanical properties at a continuous temperature upto 200˚C, with... view more
Applications
  • Automotive
  • Injection molding - thermoplastics
Features
  • Copolymer
  • Filled Glass Fiber
  • Processability Good
  • Stiffness Good
EMS-Grivory (EMS Group)
Grivory G6VX-AP XE 11111 by EMS-Grivory (EMS Group) is a high performance, partially aromatic polyamide (PA) grade reinforced with 70% glass fiber. Exhibits high dimensional stability, high... view more
Features
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flow High
  • Impact resistance High
  • ...
EMS-Grivory (EMS Group)
Grivory G6VX-AP XE 11127 by EMS-Grivory (EMS Group) is a high performance, partially aromatic polyamide (PA) grade reinforced with 60% glass fiber. Exhibits high dimensional stability, high... view more
Features
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flow High
  • Impact resistance High
  • ...
EMS-Grivory (EMS Group)
Grivory G6VX-AP XE11107 by EMS-Grivory (EMS Group) is a high performance, partially aromatic polyamide (PA) grade reinforced with 55% glass fiber. Exhibits high dimensional stability, high stiffness... view more
Features
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flow High
  • Impact resistance High
  • ...
Elix Polymers
ELIX ABS HH3114 by Elix Polymers is a water insoluble, white to slightly yellowish, very high heat resistance ABS (acrylonitrile-butadiene-styrene) copolymer grade modified with poly SMI... view more
Applications
  • Automotive>External - Roof module
  • Automotive>Internal - Sun-visor
  • Automotive>Lighting - Housings
  • Automotive>Under the hood - Ventilation, heating systems
  • ...
Features
  • Density Low
  • Dimensional stability Good
  • Emissions Low
  • Flow High
  • ...
Elix Polymers
ELIX ECO ABS-NF is an eco-friendly ABS (acrylonitrile butadiene styrene) polymer composite material reinforced with natural fiber. Exhibits high stiffness, heat resistance, low molding shrinkage... view more
Applications
  • Furnitures
  • Automotive
  • Extrusion
  • Injection molding - thermoplastics
  • ...
Features
  • Density Low
  • Emissions Low
  • Filled
  • Heat Resistance High
  • ...
ExxonMobil Chemical
Enable™ 40-02HH by ExxonMobil Chemical is a heat stabilized, medium density metallocene polyethylene (mPE) copolymer grade containing processing aid. Exhibits high stiffness, good optical... view more
Applications
  • Packaging>Cosmetic - Film, multilayer
  • Packaging>Food - Film, multilayer
  • Extrusion>Coextrusion
  • Extrusion>Films (blown)
Features
  • Bubble Stability Good
  • Clarity High
  • Copolymer
  • Food contact approved
  • ...
ExxonMobil Chemical
Exceed™ XP 6026 by ExxonMobil Chemical is a thermoplastic grade. Exhibits outstanding processability, enhanced toughness, flex-crack resistance, sealability, balanced shrink performance and good... view more
Applications
  • Packaging>Food - Bags & sachets
  • Packaging>Food - Film, Heat-shrinkable
  • Extrusion
Features
  • Flexibility Good
  • Heat Seal Good
  • Melt Strength Good
  • Opticals
  • ...
ExxonMobil Chemical
Exceed™ XP 6056 by ExxonMobil Chemical is a thermoplastic grade. Exhibits outstanding processability, enhanced toughness, flex-crack resistance, sealability, balanced shrink performance and good... view more
Applications
  • Packaging>Food - Bags & sachets
  • Packaging>Food - Film, Heat-shrinkable
  • Extrusion
Features
  • Flexibility Good
  • Heat Seal Good
  • Melt Strength Good
  • Opticals
  • ...
ExxonMobil Chemical
Exceed™ XP 8318ML by ExxonMobil Chemical is a metallocene polyethylene copolymer grade. Contains processing aid and thermal stabilizer. Offers step-out toughness, high flex-crack resistance and... view more
Applications
  • Packaging
  • Extrusion>Films (blown)
Features
  • Copolymer
  • Crack Resistance Good
  • Food contact approved
  • Processability Good
  • ...
ExxonMobil Chemical
Exceed™ XP 8358ML by ExxonMobil Chemical is a metallocene polyethylene copolymer grade. Contains processing aid and thermal stabilizer. Offers step-out toughness, high flex-crack resistance and... view more
Applications
  • Packaging
  • Extrusion>Films (blown)
Features
  • Copolymer
  • Crack Resistance Good
  • Food contact approved
  • Processability Good
  • ...
INEOS Styrolution Group
Novodur® SBM-90 by INEOS Styrolution Group is a styrene-methylmethacrylate/methylmethacrylate-butadiene-styrene grade. Exhibits easy processability, high aesthetic & colourful surface appearance... view more
Applications
  • Buildings & constructions>Bathrooms & Sanitary
  • Injection molding - thermoplastics
Features
  • Appearance Pleasing Surface
  • Dimensional stability Good
  • Heat Resistance Good
  • Processability Good
Invista Engineering Polymer Solutions
TORZEN® HV125A NC01 is a high viscosity, non-lubricated PA (polyamide) 66 grade. Available in natural and black color. Exhibits good processability, wear resistance, durability, fast & consistent... view more
Applications
  • Gears
  • Injection molding - thermoplastics
  • Extrusion>Multilayer films
  • Extrusion>Films (cast)
Features
  • Chemical resistance Good
  • Durable
  • Oil Resistant
  • Processability Good
  • ...
Invista Engineering Polymer Solutions
TORZEN® HV80A NC01 is a medium viscosity, non-lubricated PA (polyamide) 66 grade. Available in natural and black color. Exhibits wear resistance, durability, good processability (good retention of... view more
Applications
  • Gears
  • Extrusion>Multilayer films
  • Injection molding - thermoplastics
  • Compoundings
  • ...
Features
  • Chemical resistance Good
  • Durable
  • Medium viscosity
  • Oil Resistant
  • ...
Kepital® H100 by KEP is a high viscosity, self-lubricating polyacetal homopolymer (POM, Homopolymer) grade. Provides wider processing window, good mechanical properties, enhanced thermal aging and... view more
Applications
  • Gears
Features
  • Abrasion resistance Good
  • Color stability Good
  • Creep Resistance Good
  • Friction Low
  • ...
Kolon Plastics (Kolon Industries)
KOPEL® KP3328 by Kolon Plastics (Kolon Industries) is a low modulus thermoplastic copolyester elastomer (COPE) grade. Possesses good hardness (28 shore D), good colorability, softness, reliability... view more
Applications
  • Automotive
  • Engineering / manufacturing>Belts, conveyors
  • Gears
  • Sports & Leisures>Skies
  • ...
Features
  • Appearance Pleasing Surface
  • Chemical resistance Good
  • Colorability Good
  • Creep Resistance Good
  • ...
Pocan TP 555-911 by Lanxess is an easy to process polycyclohexylenedimethylene terephthalate (PCT) grade. It is an alternative to high-melting polyamides. Exhibits good mechanical properties, high... view more
Applications
  • Optics>LED (Light-Emitting Diode
  • Injection molding - thermoplastics
Features
  • Flow Good
  • Processability Good
Pocan TP 555-912 by Lanxess is an easy to process polycyclohexylenedimethylene terephthalate (PCT) grade. It is an alternative to high-melting polyamides. Exhibits good mechanical properties, high... view more
Applications
  • Optics>LED (Light-Emitting Diode
  • Injection molding - thermoplastics
Features
  • Flow Good
  • Processability Good
Pocan TP 555-991 by Lanxess is an easy to process polycyclohexylenedimethylene terephthalate (PCT) grade. It is an alternative to high-melting polyamides. Exhibits good mechanical properties, high... view more
Applications
  • Optics>LED (Light-Emitting Diode
  • Injection molding - thermoplastics
Features
  • Flow Good
  • Processability Good
Pocan TP 555-992 by Lanxess is an easy to process polycyclohexylenedimethylene terephthalate (PCT) grade. It is an alternative to high-melting polyamides. Exhibits good mechanical properties, high... view more
Applications
  • Optics>LED (Light-Emitting Diode
  • Injection molding - thermoplastics
Features
  • Flow Good
  • Processability Good
Lehmann & Voss
LUVOCOM® EOG by Lehmann & Voss is a polyetheretherketone (PEEK) grade. Exhibits easier processing, shorter annealing time (up to 50% less), reduced wear, reduced internal stress and warpage (up to... view more
Applications
  • Gears
  • Sealants, seals & gaskets
Features
  • Creep Resistance Good
  • Processability Good
  • Warpage Low
  • Wear resistance Good
National Petrochemical Industrial Company (NATPET)
Teldene® B20ML by National Petrochemical Industrial Company (NATPET) is an impact copolymer PP grade. Possesses processing benefits and medium fluidity allowing cycle time reduction. Exhibits better... view more
Applications
  • Automotive
  • Furnitures
  • Households products/ Consumer Goods>Toys
  • Packaging
  • ...
Features
  • Dimensional stability Good
  • Food contact approved
  • Impact modified
  • Processability Good
  • ...
Polymax
D6940 by Polymax is a low hardness TPE (thermoplastic elastomer) grade. Exhibits better performance than that of thermoplastic vulcanizate (TPV). Also exhibits low-temperature toughness, ease in... view more
Applications
  • Sealants, seals & gaskets
  • Extrusion
Features
  • Compression Set Low
  • Elastic Recovery Excellent
  • Heat Resistance High
  • Melt Strength Good
  • ...
DURACON® POM EX-09 WK2001 by Polyplastics is a high viscosity polyacetal, polyoxymethylene (POM) standard grade. Exhibits balanced mechanical properties, good moldability, excellent creep... view more
Applications
  • Extrusion
Features
  • Chemical resistance Good
  • Color stability Good
  • Creep Resistance High
  • Dimensional stability Good
  • ...
S&E Specialty Polymers
TufFill™ 15-058 by S&E Speciality Polymers is a non-halogenated thermoplastic elastomer (TPE) grade. Exhibits excellent processability, low shear rate, no die-drool and good chemical resistance. Is... view more
Applications
  • Wiring & Cables>Cable jacketing
Features
  • Chemical resistance Good
  • Halogen Free
  • Processability Good
Ryton® R‐4‐242 by Solvay is a natural or black colored, flame retardant polyphenylene sulphide (PPS) reinforced with 40% glass fiber. Exhibits heat resistance, excellent dimensional stability, very... view more
Applications
  • Appliances>Ovens
  • Appliances>Microwaves
  • Appliances>Coffee makers
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded
  • ...
Ryton® R‐7‐232 by Solvay is a natural or black colored, flame retardant polyphenylene sulphide (PPS) reinforced with 65% glass/ mineral. Exhibits heat resistance, excellent dimensional stability... view more
Applications
  • Appliances>Coffee makers
  • Appliances>Microwaves
  • Appliances>Ovens
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded
  • ...
Technyl® REDx by Solvay is a high heat performance polyamide 6.6 (PA 6.6) grade. Provides long-term thermal stability, superior processability and excellent surface aspect. Possesses patented... view more
Applications
  • Automotive
  • Injection molding - thermoplastics
Features
  • Chemical resistance Good
  • Heat Resistance High
  • Processability Good
  • Surface Finish Good
  • ...
Chemlon® 890 HNT001 Nylon by Teknor Apex is a heat stabilized, lubricated polyamide 6/12 (PA 6/12) grade. Exhibits excellent chemical resistance, high service temperature, good dimensional... view more
Applications
  • Wiring & Cables>Cable jacketing
  • Wiring & Cables>Automotive
  • Extrusion
Features
  • Chemical resistance High
  • Corrosion Resistance Good
  • Dimensional stability Good
  • ESCR High Stress Crack Resist
  • ...
Monprene® RG-10170 X by Teknor Apex is a high performance, lubricated, BPA-free, low density, medium hardness thermoplastic elastomer grade present as pellets. Exhibits low flow and good adhesion... view more
Applications
  • Households products/ Consumer Goods>Kitchen utensiles
  • Households products/ Consumer Goods>Toys
  • Packaging
  • Injection molding - thermoplastics
Features
  • Adhesion Good
  • Colorability Good
  • Density Low
  • Flow Low
  • ...
Sarlink® 9156-02 TPV by Teknor Apex is a lubricated thermoplastic vulcanizate (TPV) elastomer grade. Exhibits superior processability, lower levels of stress relaxation at elevated temperatures and... view more
Applications
  • Pipes, Hoses & Fittings>Pipes (drainage)
  • Pipes, Hoses & Fittings>Pipes (sewerage)
  • Sealants, seals & gaskets
Features
  • Lubricated
  • Processability Good
Sarlink® ME-2240DB is a neutral, readily colorable styrenic TPE (thermoplastic elastomer) grade. It is less dense than EPDM (ethylene propylene diene monomer (M-class) rubber) and PVC (polyvinyl... view more
Applications
  • Automotive>External - Seals
  • Injection molding - thermoplastics
Features
  • Colorability Good
  • Density Low
  • Flexibility Good
  • Flow High
  • ...
Sarlink® ME-2265B is a neutral, readily colorable styrenic TPE (thermoplastic elastomer) grade. It is less dense than EPDM (ethylene propylene diene monomer (M-class) rubber) and PVC (polyvinyl... view more
Applications
  • Automotive>External - Seals
  • Injection molding - thermoplastics
Features
  • Colorability Good
  • Density Low
  • Flexibility Good
  • Flow High
  • ...
STYRON X-TECH™ 2175 Polystyrene Resin by Trinseo is a polystyrene high impact (HIPS) grade. Provides high stiffness, very high melt strength, improved wall thickness distribution, broader processing... view more
Applications
  • Packaging
  • Buildings & constructions
  • Appliances>Refrigerators
  • Thermoforming/ Vaccuum forming
Features
  • Chemical resistance Good
  • ESCR High Stress Crack Resist
  • Impact resistance High
  • Melt Strength Good
  • ...
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement

Online Course

Chris DeArmitt
5 Days left to register

Tuesday Feb 28 2017

By Chris DeArmitt

Get faster to the right balance between impact resistance and compatibility with other additives (color pigments, flame retardants…) by reviewing successful impact modification strategies

180 Read More
Back to Top