The Universal Selection Source: Plastics & Elastomers

Industry News

FDA's Spinal System Reclassification Paves the Way for Invibio's PEEK Rods

Published on 2017-04-07. Author : SpecialChem

The US Food and Drug Administration (FDA) has recently reclassified semi-rigid spinal stabilization systems from Class III to Class II (*) offering a regulatory pathway to 510(k) clearance in the United States for innovative devices using PEEK-OPTIMA™ polymer based rods from Invibio Biomaterial Solutions.

PEEK Rod in Spinal System
PEEK Rod in Spinal System

When compared to rigid systems, semi-rigid PEEK-OPTIMA rods can deliver similar benefits to titanium and are strong enough to stabilize the spine. The FDA decision supports the safety of semi-rigid systems and provides greater options for surgeons who prefer more flexibility than traditional rigid pedicle screw systems to achieve fusion.

PEEK-OPTIMA Rods for Spinal Stabilization

  • Invibio collaborated closely with medical device manufacturers and the FDA to provide clinical and biomechanical data in support of the use of semi-rigid PEEK-OPTIMA rods for spinal stabilization. 
  • The pioneering development and reclassification is expected to assist the medical profession in achieving progress in enhanced spinal fusion systems and procedures. 

Clinical Evidence: Invibio to Support OEMs Further with Their Submissions to FDA

John Devine, Invibio medical business director, commented:
"The down classification of PEEK-OPTIMA rods as a Class II technology for spinal fusion is a welcome and progressive development for the medical device market. Substantial evidence was presented in reaching this conclusion, including data from over 51,000 PEEK rod implantations. We now have a growing body of clinical evidence that systems based on Invibio´s PEEK-OPTIMA rods have clearly defined advantages over all-metal constructs and have the potential to drive the future of posterior spine stabilization.”

John Devine
John Devine
John Devine concluded:
“Healthcare globally is under pressure to control costs which is why Invibio offers PEEK-OPTIMA spinal rod components to the manufacturer. Compiling evidence that supports the safety and clinical benefits of our materials enables us to also provide an efficient route to market for our customers in terms of manufacturing and regulatory clearance. We look forward to working with our customers to achieve clearance for semi-rigid systems in order to offer improved options for surgeons and ultimately patients.”

Metal Alternative Offers Distinct Advantages

For some time, the medical profession has been aware that spinal-rod components made from PEEK-OPTIMA polymers may be used as an alternative to metal to achieve semi-rigid fixation with posterior pedicle screw systems as an adjunct to fusion. And in fact, they offer distinct advantages over stabilization systems constructed from a metal such as titanium.

Dr. Thierry Desjardins, Neurosurgeon (Cagnes-sur-Mer, France), who has been using PEEK-OPTIMA spinal rods since June 2011 and has always been reluctant to use too rigid a system as this could accelerate degeneration at adjacent spinal segments, commented:
“PEEK-polymer solutions are widely recognized for spinal interbody fusion and are frequently used. The versatile PEEK-OPTIMA has a modulus close to that of human bone, and this allows it to be a natural bridge between very rigid metal implants, such as the titanium constructs, and more dynamic approaches. In fact, PEEK-polymer implants offer numerous benefits, including radiolucency, which of course metals don't allow, whilst retaining the stability of titanium.”

Semi-rigid Rods to Bridge Treatment Gap: Improved Load Sharing Can Encourage Fusion

  • Spinal rods composed of metal are not without challenges, including, but not limited to, rod breakage, the loosening of screws, and accelerated degeneration at adjacent spinal segments. 
  • The high stiffness inherent in all-metal constructs is believed to contribute to these clinical challenges and negatively impact patient outcomes.
  • In addition, a metal such as titanium lacks artifact-free imaging, and inevitably this impacts the ability of surgeons to position stabilization systems accurately. 

PEEK-OPTIMA polymer based stabilization, on the other hand, effectively functions as a 'bridge' approach.
  • Rods made from the material have sufficient strength to reduce the range of motion in order to stabilize the treated segment, but possessing a modulus similar to that of cortical bone, they still allow physiological movement on adjacent upper and lower segments.
  • As a result, clinical results increasingly suggest that PEEK-OPTIMA spinal rod components preserve or slow down the degeneration of adjacent discs.
  • As a consequence, patients may benefit from improved load sharing to encourage fusion and more physiologic loading at adjacent levels, which may decelerate degeneration.

(*) The US Food and Drug Administration (FDA) renamed dynamic stabilization systems as "semi-rigid systems," and defined them as a sub-type of pedicle screw systems, now referenced as "thoracolumbosacral pedicle screw systems".

About Victrex

Victrex is one of the world leaders in high performance Aromatic Polyketone Solutions (PAEK). For more than three decades, Victrex has collaborated with customers to help turn their toughest challenges into tangible benefits. As a product leadership company, its proactive approach in monitoring the trends of the industries we serve and engaging in open dialogue with industry leaders enables us to deliver what is required to maximize performance today and tomorrow.

PS: If you liked this News, you might enjoy our Plastics & Elastomers Industry Newsletter. All the Industry News delivered twice a week right to your inbox. Sign up here!

Source: Victrex
Be the first to comment on "FDA's Spinal System Reclassification Paves the Way for Invibio's PEEK Rods"

Leave a comment

Your email address and name will not be published submitting a comment or rating implies your acceptance to SpecialChem Terms & Conditions


Injection Molding / Extrusion: How to Avoid Plastic Quality Crashes

Learn how & why you should check incoming resins beyond TDS!


Back to Top