TAGS: Electrical & Electronics
A research study led by the University of Kentucky Department of Chemistry has discovered a new way to dramatically boost the performance of electrically conductive polymers. The discovery is considered a significant step forward in the development of organic thermoelectric devices, which can convert waste heat into useful electric energy.
Overcoming Low Performance of Conductive Polymers
Conductive polymers are advantageous due to their potential for integration into low-cost devices and their mechanical flexibility — a plastic watch strap or a flexible radiator hose could have an embedded thermoelectric device. “
One day, organic thermoelectrics may be used to power smart watches and other wearable electronics, eliminating the ever pressing need to charge the battery,” said Kenneth Graham, assistant professor of chemistry and lead investigator of the study.
Until now, conductive polymers have performed below what is required for these types of devices. The UK team says this lower performance stems in part from the negatively charged materials, also known as n-type materials, inside the thermoelectric modules.
“
Thermoelectric modules require both positive (p-type) and n-type materials, with both materials ideally showing equally high performance,” Graham said.
Performance Boosting Solution
The team revealed that p-type materials may be converted to high-performing n-type materials by simply increasing their doping ratio (or altering their properties) beyond typical levels. One polymer with varying doping levels may be used as both the n-type and p-type material within a thermoelectric module.
“This new strategy greatly increases the library of potential n-type thermoelectric polymers and may lead to the performance jump needed to make polymer-based thermoelectric modules a reality,” Graham said.
Fundamentally, the work also presents an important step forward in understanding how polymers conduct electricity.
“
Traditionally, it was assumed that one type of charge-carrier, either electrons or holes, dominated electrical conductivity within a doped conjugated polymer and that this type of charge-carrier was determined by whether the dopant molecule gave (n-type) or took (p-type) an electron from the polymer,” Graham said. “
We show that this is not always the case, as p-type dopants can be used to create n-type materials at high doping concentrations.”
In this study, the authors show that electrons can become the dominant charge-carriers at high doping concentrations. The discovery has potentially transformative consequences for the field.
“
Indeed, these new insights present a challenge for the community to understand the basic chemical and physical principles that govern electrical conduction in polymers,” said Chad Risko, associate professor of chemistry at UK and co-author of the study. “
So, there is not only interest from the standpoint of creating new materials, but also in modeling their behavior so that we can predict properties before materials are made.”
Source: University of Kentucky