TAGS: Electrical & Electronics High Heat Materials
SABIC is introducing two new grades in its portfolio of Superflow ULTEM™ resins that address the trend of electronic component miniaturization to enable smaller, lighter and more-sophisticated devices. Glass fiber-reinforced Superflow ULTEM™ SF2250EPR and SF2270 resins feature exceptional flow properties for molding burn-in test sockets (BiTS) used to stress-test integrated circuit (IC) chips.
They can also potentially be used to mold thin-wall, high-precision, miniaturized connectors. Their signature flow properties help meet the challenges of complete mold filling and easy release in ever-smaller components.
Alternatives to Incumbent Materials
Balancing flow with toughness, Superflow ULTEM™ SF2250EPR and SF2270 resins are excellent
alternatives to incumbent materials such as glass fiber-reinforced liquid crystal polymers (LCPs) and polyethersulfone (PES) resins. They deliver greater weld line strength and mechanical performance than LCPs, and higher tensile strength and modulus, higher weld line strength and lower moisture absorption than PES resins.
“
As electronic components such as IC chips and onboard connectors shrink in size and weight to support new generations of mobile and wearable devices, there is a need for novel materials offering optimized performance and consistent quality in miniaturized configurations,” said Tsutomu (Tom) Kinoshita, senior business manager, SABIC. “
These requirements apply both to connectors and burn-in test sockets used to test the performance and reliability of IC chips for higher-speed and higher-density interconnections required by smart electronics. The expansion of our Superflow ULTEM™ polyetherimide resin portfolio addresses evolving industry trends and demonstrates SABIC’s continued investment in new technologies for the electronics industry.”
Material Withstands High-Heat Burn-In Tests
Burn-in test socket manufacturers are seeking new material solutions that can support advanced designs for fine-pitch components that are used under extremely harsh conditions, including high temperatures, high pressures and multiple cycles of use. Superflow ULTEM™ SF2250EPR resin is an advanced material that can withstand high-heat burn-in tests up to 150°C, while offering higher strength and dimensional stability compared to incumbent materials. South Korea’s Sensata Technologies is one of the first BiTS makers to adopt SABIC’s Superflow ULTEM™ SF2250EPR resin.
Tommy Oh, design & engineering manager, Sensing Solutions, for Sensata Korea, said, “
As the industry advances to finer pitches and miniaturization, existing material solutions present technical limitations in complex BiTS designs due to insufficient flowability and weak weld lines. SABIC’s new Superflow ULTEM™ SF2250EPR solution enables us to successfully develop and commercialize various BiTS devices with superior performance, especially those with lower pitches, such as 0.5 mm and even 0.4 mm. This material has demonstrated approximately 30 percent better ductility, plus much better flowability, compared to alternative PES solutions, especially in thinner-wall weld areas. With the new SABIC material, we anticipate major benefits for our BiTS applications in critical performance areas, including tensile and flexural strength.”
Five Times Longer Flow Length
Within the
ULTEM™ resin family of polyetherimide (PEI) materials, the Superflow series provides the highest flow properties with up to five times longer flow length than standard glass fiber reinforced ULTEM™ resins. The high flow performance can reduce the number of gates resulting in less breakage and higher production yields. Other benefits include lower melt temperature settings that can save energy and minimize outgassing, and accelerated cycle times for higher productivity.
Superflow ULTEM™ resins can potentially replace high-flow, glass fiber-reinforced PES materials. Not only do the ULTEM™ grades offer similar flow behavior compared to PES – avoiding the need for tool modification – they can deliver up to 20 percent higher strength and modulus, up to 9 percent lower density and lower moisture absorption.
The new Superflow ULTEM™ grades are available globally.
SABIC's Complete PEI Product Range
Source: SABIC
