OK
The Universal Selection Source:
Plastics & Elastomers
Product News

Teknor Apex at MD&M West: Unveils Rigid PVC to Replace PC in Clear Medical Components

Published on 2015-02-12. Author : SpecialChem

PAWTUCKET, RI, U.S.A. -- A breakthrough in PVC technology now makes it possible for rigid PVC to replace polycarbonate (PC) in clear medical components such as connectors and check valves, obtaining comparable strength and excellent clarity while reducing or eliminating the stress cracking that often occurs in PC at the interface with flexible PVC components such as tubing.

Teknor Apex Company introduces new Apex SCR™ rigid PVC compounds based on this innovative chemistry at MD&M West, Feb. 10-12, 2015 (Booth 2532). The company’s Paul Kroushl, technical service associate, makes a presentation on the technology.

Data from extensive testing by the company indicate that after prolonged contact with flexible PVC under conditions designed to induce stress cracking, it took Apex SCR rigid PVC grades a week to two and half weeks or more to exhibit stress cracking, far longer than the few hours recorded for test samples consisting of conventional rigid PVC or a PC widely used in medical devices. At the same time, the new compounds provided the excellent physical properties that have been the chief reason why PC has been used in such applications: toughness, rigidity, and clarity.

Apex SCR rigid PVC compounds meet biocompatibility standards like ISO 10993-1 and USP Class VI, can be sterilized by EtO, and heat methods, have good heat stability, and are easy to process. They offer a cost savings compared with resins that may be over-engineered for the application.

Teknor Apex recommends the new materials for Y-connectors, cannulae, check valves, male and female Luer fittings, suction Yankauers, filter housings, drip chambers and caps, and specimen containers.

Stress cracking, or crazing, occurs when amorphous polymers like PC or conventional rigid PVC come into contact with the plasticizers used to make PVC flexible. PC in particular is even more susceptible to stress cracking under these conditions than standard PVC, and it is possible for PC components to become so riddled with cracks that the ultimate result is catastrophic part failure. Until now the device industry has attempted to slow or stop stress cracking by focusing on the plasticizer formulation used in the flexible component, but this method has had limited success.

“Stress cracking is a problem that the medical device industry has had to deal with for decades,” said Peter Galland, Industry Manager of the Vinyl Division of Teknor Apex. “Apex SCR compounds provide a cost-effective way for the industry to address this problem without having to compromise end-use performance.”

About Teknor Apex


Teknor Apex Company, a privately held firm founded in 1924, is one of the world’s leading custom compounders of plastics. Teknor Apex produces flexible and rigid vinyl, thermoplastic elastomers, nylons, toll and specialty compounds, color masterbatches, specialty chemicals, bioplastics and hoses. The company is headquartered in Pawtucket, RI, U.S.A. and operates thirteen facilities worldwide in the United States, the Netherlands, the United Kingdom, China and Singapore.

About Vinyl Division of Teknor Apex Company


The Vinyl Division of Teknor Apex Company is among the leading manufacturers of compounds based on PVC, including Apex® flexible and rigid vinyl, Flexalloy® vinyl elastomers, Fireguard® low-flame, low-smoke compounds for wire and cable, and BioVinyl™ compounds with bio-based plasticizer. The Division is an international supplier to the appliance, automotive, construction, medical device, wire and cable, and other industries.

Source: Teknor Apex Company


Improve the durablility of Polyurethane with Eternacoll Polycarbonate diols
Channel Alerts

Receive weekly digests on hot topics

Back to Top