OK
The Universal Selection Source:
Plastics & Elastomers
Online Course

Rubber vs TPE: When to Select What?

This is a Past Course

Recorded on May 3, 2018

Gain greater control over your elastomeric part performance by choosing the right material (rubber vs TPE) in your end application (tires, seals, gaskets, medical equipments…)

Jeff Jansen will review the structure & composition of thermoset rubbers & thermoplastic elastomers, and compare & contrast both materials to help you find the material best suited for your application (using practical case-studies)

Read the full Course Outline

Presented By:
Jeffrey Jansen
Length: 90 min

Course Type: Formulation
Level: Intermediate

Add Recorded Course to your Cart

Package includes:

.wmv Courses Recording, Presentation Slides & Transcript of Q&A session

Why should you view this course?

When you work with elastomers, material selection is often the most critical step and you must get it right to avoid product failure. But despite very different and unique properties, the two elastomeric materials (Rubber and TPE) can look and feel similar. Don’t let the limited availability of comparative information make you select the wrong elastomer for your application… Join this course and:

  1. Gain in-depth understanding of the structural and compositional differences between Rubbers and TPEs

  2. Select most suited elastomer depending on the application conditions to achieve desired properties (high flexibility, wide temperature range, good chemical resistance…)

  3. Optimize your product performance and avoid unnecessary product failure by better understanding the key characteristics of elastomeric materials
Rubber vs TPE

Who should view this course?

  • Material Engineers, Designers, Quality Engineers working with Elastomers
  • Elastomeric material manufacturers

Course Outline

The following sections will be covered during this course:
  1. Overview of Elastomeric Materials

  2. The Structure of TPEs and Rubber – A Comparison and Contrast

  3. Rubber Materials
    • Styrene Butadiene Rubber (SBR)
    • Nitrile Rubber (NBR)
    • Chloroprene Rubber (CR)
    • Ethylene Propylene Diene Rubber (EPDM)
    • Epichlorohydrin Rubber (CO, ECO)
    • Fluoroelastomers (FKM, FPM)
    • Silicone Rubber (Q)
    • Polyurethane Rubber (PUR)

  4. TPE Materials
    • Styrenic block copolymers (SBC)
    • Polyolefin blends (TPO)
    • Elastomeric alloys (TPV)
    • Thermoplastic urethanes (TPU)
    • Thermoplastic copolyester (COPE)
    • Thermoplastic polyamide (PEBA)

  5. Properties – Strengths and Weaknesses of Each Type
    • Mechanical
    • Thermal
    • Chemical

  6. Processing

  7. Applications – Where is there overlap – Where are there difference
    • Seals, o-rings, gaskets
    • Tires
    • Hoses
    • Belts
    • Electrical insulation
    • Gripping surfaces
    • Toys and recreation
    • Medical devices
    • Housewares

  8. Material Selection

  9. Material Specification

  10. 30 mins Q&A – Ask your questions directly to the expert!

Currency Converter Add To Cart

Courses You May Also Like :

Creep Failure: Prediction and Prevention Strategies Creep Failure: Prediction and Prevention Strategies
DSC Interpretation Made Easy for Plastics Optimization DSC Interpretation Made Easy for Plastics Optimization
FTIR Made Easy for Better Identification of Plastics FTIR Made Easy for Better Identification of Plastics
Plastics Failure Analysis in Practice Plastics Failure Analysis in Practice
Best Combine DMA, DSC, FTIR... for Optimal Material Analysis Best Combine DMA, DSC, FTIR... for Optimal Material Analysis
Reducing Environmental Stress Cracking in Plastic Parts Reducing Environmental Stress Cracking in Plastic Parts
Creep Failure: Prediction and Prevention Strategies Creep Failure: Prediction and Prevention Strategies
DSC Interpretation Made Easy for Plastics Optimization DSC Interpretation Made Easy for Plastics Optimization
FTIR Made Easy for Better Identification of Plastics FTIR Made Easy for Better Identification of Plastics
Plastics Failure Analysis in Practice Plastics Failure Analysis in Practice
Best Combine DMA, DSC, FTIR... for Optimal Material Analysis Best Combine DMA, DSC, FTIR... for Optimal Material Analysis
Reducing Environmental Stress Cracking in Plastic Parts Reducing Environmental Stress Cracking in Plastic Parts

Your cart

The shopping cart is empty.

Hurry !
Attend your First Online Course at flat 20% Off!


Use code: SPECIAL20
*limited period offer
Use Code Now
Back to Top