The Universal Selection Source: Plastics & Elastomers

by SpecialChem

ADX-1009

Technical DataSheet | Supplied by Advanced Composites (Mitsui Chemicals)

ADX-1009 by Advanced Composites (Mitsui chemicals) is an impact modified thermoplastic olefin (TPO) elastomer grade, filled with mineral. Is a paintable grade and provides high stiffness and low temperature ductility. Designed for injection molding method. ADX-1009 is possibly used for pillar and interior applications. During processing, holding pressure should be lower than boost pressure with a minimum amount of time to prevent over-packing of the part and screw should stop 1 to 2 seconds before mold open.

ADX-1009 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Product Status
xxxxxxxxxx
Applications/ Recommended for
Injection molding - thermoplastics
Key Features
  • xxxxxxx
  • xxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxx
  • xxxxxxxxx
  • xxxxxxxxxxxxxxx

ADX-1009 Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)
20 dg/min
( 230°C, 2.16 kg )
ISO 1133
Specific Gravity (Density)
1.03 g/cm3
ISO 1183

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Strength (Tensile Stress)
xx MPa
xxxxxxxxxx
xxxxxxx
Flexural Modulus (Stiffness)
xxxx MPa
xxxxxxx

Impact Properties

Value & Unit
Test Condition
Test Method
Notched Izod Impact
xx kJ/m2
xxxx
xxxxxxxxx
Notched Izod Impact
x kJ/m2
xxxxx
xxxxxxxxx

Thermal Properties

Value & Unit
Test Condition
Test Method
Heat Deflection Temperature Under Load (HDT)
xxx °C
xxxxxx

ADX-1009 Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Barrel Temperature, Nozzle
xxx °F
Barrel Temperature, C4
xxx °F
Barrel Temperature, C3
xxx °F
Barrel Temperature, C2
xxx °F
Barrel Temperature, C1
xxx °F
Melt Temperature
xxxxxxxxx °F
Mold Temperature
xxxxxxxxx °F
Injection Pressure
xxxxxxxxxx -
Injection Speed
xxxxxxxxxx -
Cushion
xxxxxx mm
Screw RPM
xxx -
Pre-Drying Temperature
xxx °F
Pre-drying Time
x hr
Last edited Sep 19, 2017
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Back to Top