OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris

Arnitel® PL380

Technical Datasheet | Supplied by Envalior
Arnitel® PL380 by Envalior is a high-performance, high flow, non-reinforced & non-flame retardant, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing environmental impact. It is processed by injection molding. It possesses flexibility, strength and excellent processing characteristics. This food contact quality grade shows high temperature-, fatigue- and abrasion resistance. It offers chemical resistance against household chemicals like cleaning agents, sunscreen lotion and automotive greases and oils. It allows for reliable solutions due to excellent colorability and color stability and due to its retention of flexibility even at temperatures down to -40°C or at elevated temperatures up to 100°C. And, allows for solutions with nice touch & feel characteristics. Arnitel® PL380 allows for cost effective solutions since it yields thermoplastic processing advantages over rubber, resulting in faster cycle times in comparison with other TPE's. It exhibits excellent load bearing capacity and environmental resistance and due to a very consistent performance over temperature ranges from -55°C (-67°F) to +150°C (+300°F) and longest lifetime to failure. It is used in bed springs, railway pads and suitcase handles. It meets ISO 18064 for TPC-ET.
REQUEST A SAMPLE ORIGINAL DATASHEET CONTACT SUPPLIER
Arnitel® PL380
Technical Datasheet | Supplied by Envalior
REQUEST A SAMPLE ORIGINAL DATASHEET CONTACT SUPPLIER
Product Type
  • Polyester TPE > COPE
  • Polyester [Polyester] > > Co-polyester
Physical Form
Pellets
Product Status
COMMERCIAL
Geographical Availability
Central and Eastern Europe, North America, South and Central America, Western Europe, Asia / Pacific, Africa, Middle East and Central Asia
Applications/ Recommended for
  • Transportation > Railways
  • Injection molding - thermoplastics
Labels/Agency Rating
ISO 18064 TPC-ET
Key Features
  • Abrasion resistance, High
  • Chemical resistance, Good
  • Color stability, Good
  • Colorability, Good
  • Cost Effective
  • Cycle Time, Short
  • Fatigue Resistant
  • Flexibility, Good
  • Flow, High
  • Food Contact Acceptable
  • Grease Resistant
  • Oil Resistant
  • Processability, Good
  • Strength, Good
  • Unfilled

Arnitel® PL380 Properties

Mechanical Properties

Value & Unit
Test Condition
Test Method
Nominal Strain
525 %
(At Break) 
ISO 527-1,-2
Modulus of Elasticity
44 MPa
ISO 527-1,-2
Flexural Modulus
50 MPa
ISO 178

Arnitel® PL380 Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Maximum Shot Volume
> 50 %
Melt Residence Time
< 5 min
Volumetric Compression Ratio
2.5

Want to list or
update your products?
Want to report errors or
suggest improvements?
Access Reliable
Product Information

Database of 99992 Plastics & Elastomers,
reviewed and updated daily

Improve your Product
Selection Experience

Open your choices, compare products,
ask for samples, contact suppliers

Keep-up with latest
Technical Solutions

Be inspired and never miss again crucial
innovations with our weekly email updates

Back to Top