The Universal Selection Source: Plastics & Elastomers

by SpecialChem

THERMOLAST® K TC6CEZ

Technical DataSheet | Supplied by Kraiburg

THERMOLAST® K TC6CEZ by Kraiburg is a black colored thermoplastic elastomer (TPE) grade. Exhibits excellent abrasion-, scratch and very good chemical resistance against sebum and sun screen. Possesses smooth & silky surface and excellent mechanical properties. Offers easy coloring, excellent color-stability, good chemical compatibility, UV-stability and easy processing at high injection rates. Shows excellent adhesion to polar thermoplastics such as PA 6, PA 12, PC, ABS, PC/ABS, ASA and SAN. Suitable for processing by injection molding. THERMOLAST® K TC6CEZ is used in cell phone cases, cosmetic packaging, headphones, remote controls and wearables. Passed chlorine-bromine test (Cl+Br)< 900 ppm.

THERMOLAST® K TC6CEZ Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Appearance
Black
Product Launch Date
xxxxxxxxxxx
Product Status
xxxxxxxxxx
Applications/ Recommended for
  • Packaging
  • Injection molding - thermoplastics
Key Features
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxx

THERMOLAST® K TC6CEZ Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Durometer Hardness (Shore)
62
( Shore A )
DIN ISO 7619-1
Specific Gravity (Density)
1.150 g/cm3
DIN EN ISO 1183-1

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Strength
xx MPa
xxxxxxxxxx
xxxxxxxxxx
Tensile Elongation
xxx %
xxxxxxxxxx
xxxxxxxxxx
Tear Resistance
xxxx N/mm
xxxxxxxxxx
Adhesion to PC
xxx N/mm
xxxxxxxxxx
xxxxxxxx

THERMOLAST® K TC6CEZ Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Cylinder Zone 1 Temperature
xxx °F
Cylinder Zone 2 Temperature
xxx °F
Cylinder Zone 3 Temperature
xxx °F
Hot runner Temperature
xxxxxxxxx °F
Injection pressure
xxxxxxxxxx psi
Injection rate
xxxxx sec
Hold pressure
xxxxxxx % of injection pressure
Back pressure
xxxxxxxx bar
Mold temperature
xxxxxxxxx °F
Pre-drying temperature
xxx °F
Pre-drying time
x hr
Residual moisture
xxxxxx %
Residence time
xxxx min
Last edited Jun 13, 2017
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Back to Top