OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris

Arnite® TV4 264 SN

Technical Datasheet | Supplied by DSM
Arnite® TV4 264 SN by DSM is a high performance, flame-retardant polybutylene terephthalate (PBT) grade reinforced with 30% glass fiber. It is processed by injection molding. It shows resistance against heat, chemical, aliphatic hydrocarbons, motor vehicle fuels, oils and greases, dilute acids and bases, detergents and salt solutions. It allows for reliable solutions due to good electrical and thermal endurance. Also, allows for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses. Arnite® TV4 264 SN is used in motor starter/overload relays and power distribution applications. It meets ISO 1043 for PBT.
REQUEST A SAMPLE ORIGINAL DATASHEET CONTACT SUPPLIER
Arnite® TV4 264 SN
Technical Datasheet | Supplied by DSM
REQUEST A SAMPLE ORIGINAL DATASHEET CONTACT SUPPLIER
Product Type
Polyester > PBT
Physical Form
Pellets
Product Status
COMMERCIAL
Geographical Availability
Africa, Asia / Pacific, Central and Eastern Europe, Middle East and Central Asia, North America, South and Central America, Western Europe
Applications/ Recommended for
  • Electrical markets
  • Injection molding - thermoplastics
Labels/Agency Rating
ISO 1043 PBT
Key Features
  • Acid Resistant
  • Base Resistant
  • Chemical resistance, Good
  • Cost Effective
  • Cycle Time, Short
  • Electrical Properties, Good
  • Filled, Glass Fiber
  • Flame retarded
  • Fuel Resistant
  • Grease Resistant
  • Heat Resistance, Good
  • Hydrocarbon Resistant
  • Oil Resistant

Arnite® TV4 264 SN Properties

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Modulus
11500 MPa
( )
ISO 527-1/2
Tensile Strength at Break
140 MPa
( )
ISO 527-1/2
Tensile Strain
1.8 %
(At Break)
ISO 527-1/2

Arnite® TV4 264 SN Processing Guidelines

Injection Molding Properties

Value & Unit
Test Condition
Test Method
Dew Point
-20 - -30 °C
Mold Temperature
60 - 100 °C
Drying Time
3 - 6 hr

Want to list or
update your products?
Want to report errors or
suggest improvements?
Access Reliable
Product Information

Database of 94837 Plastics & Elastomers,
reviewed and updated daily

Improve your Product
Selection Experience

Open your choices, compare products,
ask for samples, contact suppliers

Keep-up with latest
Technical Solutions

Be inspired and never miss again crucial
innovations with our weekly email updates

Back to Top