The Universal Selection Source: Plastics & Elastomers

by SpecialChem

ELIX ULTRA HH 4115 PG

Technical DataSheet | Supplied by Elix Polymers

ELIX ULTRA HH 4115 PG by Elix Polymers is a white to slightly yellowish, very high heat resistance ABS (acrylonitrile-butadiene-styrene) copolymer grade modified with polycarbonate and poly (styrene-co-maleimide). Exhibits extreme impact resistance with low temperature ductility, very high impact up to -30°C, well balanced flowability, heat resistance & flexibility. Offers low emission, lower mold deposits in injection molding processing applications, good dimensional precision, low shrinkage & CLTE and lower density than PC/ABS. ELIX ULTRA HH 4115 PG by Elix Polymers can be processed using injection molding. Recommended for electroplating, decorative interior parts and radiator grille.

ELIX ULTRA HH 4115 PG Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Physical Form
Pellets
Appearance
White to slightly yellowish
Product Launch Date
xxxxxxxxxxxx
Product Status
xxxxxxxxxx
Applications/ Recommended for
  • Automotive > External - Grilles
  • Injection molding - thermoplastics
Key Features
  • xxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxx
  • xxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxx

ELIX ULTRA HH 4115 PG Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Density
1.07 kg/m3
ISO 1183-1
Melt Volume-Flow Rate (MVR)
14 cm3/10 min
( 220°C/10 kg )
ISO 1133
Molding Shrinkage
xxxxxxxxxx %
xxxxxxxxxx
xxxxxxxxx
Molding Shrinkage
xxxxxxxxxx %
xxxxxxxxxx
xxxxxxxxx

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Strength (Tensile Stress)
xx MPa
xxxxxxxxxx
xxxxxxxxxx
Tensile Elongation
xx %
xxxxxxxxxx
xxxxxxxxxx
Tensile Modulus
xxxx MPa
xxxxxxxxxx
xxxxxxxxxx
Flexural Modulus (Stiffness)
xxxx MPa
xxxxxxxxxx
xxxxxxx
Flexural Strength
xx MPa
xxxxxxxxxx
xxxxxxx
Tensile Strain
x %
xxxxxxxxxx
xxxxxxxxxx

Impact Properties

Value & Unit
Test Condition
Test Method
Notched Izod Impact
xx kJ/m2
xxxxxxxxxx
xxxxxxxxxx
Notched Izod Impact
xx kJ/m2
xxxxxxxxxx
xxxxxxxxxx
Charpy Notched Impact Strength
xx kJ/m2
xxxxxxxxxx
Charpy Notched Impact Strength
xx kJ/m2
xxxxxxxxxx
xxxxxxxxxx

Hardness Properties

Value & Unit
Test Condition
Test Method
Ball Indentation Hardness
xx N/mm2
xxxxxxxxxx
xxxxxxxxxx

Thermal Properties

Value & Unit
Test Condition
Test Method
Vicat Softening Temperature
xxx °C
xxxxxxxxxx
xxxxxxx
Heat Deflection Temperature Under Load (HDT)
xxx °C
xxxxxxxxxx
Heat Deflection Temperature Under Load (HDT)
xxx °C
xxxxxxxxxx
CLTE (Coefficient of Linear Thermal Expansion)
xxxx 10-4/K
xxxxxxxxxx
xxxxxxxxxx
Vicat Softening Temperature
xxx °C
xxxxxxxxxx
xxxxxxx

Flammability Properties

Value & Unit
Test Condition
Test Method
Flame Rating (UL 94)
xx Class
xxxxx
Burning Rate
xxxx mm/min
xxxxxxxx

ELIX ULTRA HH 4115 PG Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Processing (Melt) Temp
xxx °C
Mold Temperature
xx °C
Injection Velocity
xxx mm/sec
Drying Temperature
xx °C
Permitted Residual Moisture Content
xxxxxx %wt
Drying Time (Circulation Dryer)
xxxxx hr
Drying Time (Fresh Air Dryer- high speed)
xxxxx hr
Drying Time (Dried Air System)
xxxxx hr
Feeding Section Temperature
xxxxxxxxx °C
Metering Section Temperature
xxxxxxxxx °C
Compression Section Temperature
xxxxxxxxx °C
Nozzle Temperature
xxxxxxxxx °C
Last edited Oct 29, 2016
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Back to Top