OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris

EMI 330 C FR

Technical Datasheet | Supplied by RTP Company
EMI 330 C FR by RTP Company is an electrically conductive, flame retardant polycarbonate (PC) grade reinforced with 5% stainless steel fiber. It provides increased ignition resistance, reduced smoke & fume generation, excellent impact strength and good electrical properties. It exhibits heat release, colorability, good creep resistance, toughness, dimensional stability, low fatigue endurance and high heat resistance. It offers electromagnetic interference (EMI), radio frequency interference (RFI) and electrostatic discharge (ESD) protection. It is stable to water, mineral and organic acids, partially soluble in aromatic hydrocarbons and soluble in chlorinated compounds. It can be processed using injection molding. Recommended for automotive, healthcare, electrical & electronics, and industrial applications. EMI 330 C FR is used in instrument housings, fittings and components for fuel dispensers, conveyor rollers & guides, inhalation devices, ECG sensors & other bioelectrical components, pipette tips, sterilization cases, control housings for pumps, motors & test equipment, HVAC drain pans, bezels, wire & cable coatings, tape storage products, strain reliefs, fuel system connectors, filler necks, fuel valves & filters, bexels for electronics, electro-static painting. It complies with the RoHS regulation.
download
Product Type
PC (Polycarbonate) > PC
Product Status
COMMERCIAL
Geographical Availability
Africa, Asia / Pacific, Central and Eastern Europe, Middle East and Central Asia, North America, South and Central America, Western Europe

EMI 330 C FR Properties

Mechanical Properties

Value & Unit
Test Condition
Test Method
Impact Strength, Notched Izod
80 J/m
(At 3.2 mm section)
ASTM D256
Impact Strength, Unnotched Izod
No Break J/m
(At 3.2 mm section)
ASTM D4812
Tensile Strength
62 MPa
( )
ASTM D638

EMI 330 C FR Processing Guidelines

Injection Molding Properties

Value & Unit
Test Condition
Test Method
Injection Pressure
69 - 103 MPa
Dew Point
-29 °C
Processing (Melt) Temp
277 - 304 °C
Help us improve the Universal Selector

You can’t find what you are looking for? Please report missing products / suppliers, point out errors, or simply tell us how we could make the Universal Selector better.

Access Reliable
Product Information

Database of 145787 Plastics & Elastomers,
reviewed and updated daily

Improve your Product
Selection Experience

Open your choices, compare products,
ask for samples, contact suppliers

Keep-up with latest
Technical Solutions

Be inspired and never miss again crucial
innovations with our weekly email updates

Back to Top