OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris

PermaStat® 2501 FR

Technical Datasheet | Supplied by RTP Company
PermaStat® 2501 FR by RTP Company is an all polymeric, permanently antistatic, flame retardant polycarbonate and acrylonitrile butadiene styrene (PC+ABS) alloy reinforced with 10% glass fiber. It offers electrostatic discharge (ESD) protection. It provides colorability, dimensional stability, transparency, good processability and toughness even at low temperature. It shows high heat distortion temperature, low temperature impact resistance, low fatigue endurance, poor chemical resistance and weatherability. It exhibits increased ignition resistance, reduced smoke & fume generation, speed of flame spread and heat release. It can be processed using injection molding. PermaStat® 2501 FR is recommended for automotive, healthcare, electrical & electronics and industrial applications. It is used in filler necks, fuel valves & filters, bexels for electronics, electrostatic painting, inhalation devices, ECG sensors, pipette tips, sterilization cases, EMI housings, fittings & components for fuel dispensers, conveyor rollers & guides, fuel system connectors, bezels, wire & cable coatings, tape storage products, strain reliefs, control housings for pumps, motors & test equipment, HVAC drain pans, plenum space covers and vents. It complies with the RoHS regulation.
download
Product Type
PC (Polycarbonate) > PC, other Alloy
Product Status
COMMERCIAL
Geographical Availability
Africa, Asia / Pacific, Central and Eastern Europe, Middle East and Central Asia, North America, South and Central America, Western Europe

PermaStat® 2501 FR Properties

Electrical Properties

Value & Unit
Test Condition
Test Method
Volume Resistivity
1.0E8 - 9.9E9 ohm-cm
( )
ASTM D257
Static Decay
< 2.00 s
( )
FTMS101C, 4046.1
Surface Resistivity
1.0E10 - 9.9E11 ohm/sq
( )
ASTM D257, ESD STM11.11

PermaStat® 2501 FR Processing Guidelines

Injection Molding Properties

Value & Unit
Test Condition
Test Method
Injection Pressure
69 - 103 MPa
Dew Point
-29 °C
Processing (Melt) Temp
243 - 260 °C
Help us improve the Universal Selector

You can’t find what you are looking for? Please report missing products / suppliers, point out errors, or simply tell us how we could make the Universal Selector better.

Access Reliable
Product Information

Database of 145346 Plastics & Elastomers,
reviewed and updated daily

Improve your Product
Selection Experience

Open your choices, compare products,
ask for samples, contact suppliers

Keep-up with latest
Technical Solutions

Be inspired and never miss again crucial
innovations with our weekly email updates

Back to Top