The new engineering materials powerhouse

by SpecialChem

ULTEM™ Resin 3310TD

ULTEM™ Resin 3310TD by SABIC is an amorphous, mineral-filled, near infra-red transparent polyetherimide (PEI) grade. It offers significantly lower coefficient of thermal expansion (CTE) and high near-infrared (IR) transmission without degrading signal quality. It can be potential replacement for glass.

Exhibits high flow, low warpage, creep resistance, high refractive index and dimensional stability.
Imparts high stiffness/strength, high temperature & chemical resistance.
Provides better design, micro-molding and production capability as well as saves cost as compared to traditional aspherical glass lenses.
Designed for thin wall applications and processed by injection molding.
ULTEM™ Resin 3310TD is suitable for single-mode optical transceiver lenses, optical modems and optical cables.
It can be used in LiDAR sensors (automotive), drones (electronics) and robots (industrial).

ULTEM™ Resin 3310TD Properties

Mechanical Properties

Value & Unit

Test Condition

Test Method

Tensile Strength at Break

62 MPa

(At 5 mm/min, Type I)

ASTM D638

Tensile Strain

1.5 %

(At Break, 5 mm/min, Type I)

ASTM D638

Tensile Modulus

5000 MPa

(At 5 mm/min)

ASTM D638

Injection Molding Properties

Value & Unit

Test Condition

Test Method

Drying Temperature

135 - 150 °C

Maximum Moisture Content

0.02 %

Melt Temperature

360 - 390 °C

Want to list or
update your products?

View the listing options

Want to report errors or
suggest improvements?

Send a Feedback

Products with the same brand name

View more (298)

ULTEM™ Resin 3310TD

ULTEM™ Resin 3310TD Properties

Mechanical Properties

ULTEM™ Resin 3310TD Processing Guidelines

Injection Molding Properties