by SpecialChem

ULTEM™ resin AUT210 (Americas)

ULTEM™ resin AUT210 (Americas) is a flame retardant, amorphous thermoplastic polyimide (TPI) grade by SABIC. Exhibits chemical resistance, very low outgassing and plate-out. It offers low smoke & toxicity, good mechanicals in broad temperature range and low creep sensitivity. Provides high strength, high heat resistance, low shrinkage and good dimensional stability. ULTEM™ resin AUT210 (Americas) is suitable for processing by injection molding. Used in automotive exteriors and lighting applications where highly metallized, reflective surfaces are required. Meets U.S. Commerce Control Laws (15CFR Chapter VII, Part 774).

ULTEM™ resin AUT210 (Americas) Properties

Mechanical Properties

Value & Unit

Test Condition

Test Method

Tensile Modulus

3320 MPa

(At 1 mm/min)

ISO 527

Tensile Strength, Yield

103 MPa

(At 5 mm/min)

ISO 527

Tensile Strain

7 %

(At Yield, 5 mm/min)

ISO 527

Injection Molding Properties

Value & Unit

Test Condition

Test Method

Drying Temperature

150 °C

Moisture Content

< 0.02 %

Front Zone 3 Temperature

380 - 405 °C

Want to list or
update your products?

View the listing options

Want to report errors or
suggest improvements?

Send a Feedback

Products with the same brand name

View more (298)

ULTEM™ resin AUT210 (Americas)

ULTEM™ resin AUT210 (Americas) Properties

Mechanical Properties

ULTEM™ resin AUT210 (Americas) Processing Guidelines

Injection Molding Properties

Documents related to ULTEM™ resin AUT210 (Americas)