OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris

ULTEM™ resin PW2100 (Europe)

Technical Datasheet | Supplied by SABIC
ULTEM™ resin PW2100 (Europe) by SABIC is a flame retarded, amorphous polyetherimide (PEI) resin reinforced with 10% glass fiber. Exhibits good dimensional stability and mechanical properties in a broad temperature range. Offers high glass transition temperature (Tg) up to 217°C and is suitable for processing by injection molding. Possesses high stiffness, hydrolytic stability and high strength. Shows low creep sensitivity, low shrinkage and good metal adhesion. Provides chemical resistance and high heat resistance. Designed for buildings & construction and is certified with KTW, WRAS, ACS, NSF-61 and W270 for potable water applications. ULTEM™ resin PW2100 (Europe) is food contact acceptable and complies with US FDA and European Food Contact.
REQUEST A SAMPLE ORIGINAL DATASHEET CONTACT SUPPLIER
ULTEM™ resin PW2100 (Europe)
Technical Datasheet | Supplied by SABIC
REQUEST A SAMPLE ORIGINAL DATASHEET CONTACT SUPPLIER
Product Type
PEI (Polyether Imide) > PEI
Appearance
Opaque
Product Status
COMMERCIAL
Geographical Availability
North America, South and Central America, Western Europe
Applications/ Recommended for
  • Buildings & constructions
  • Injection molding - thermoplastics
Food contact approval
Yes
Labels/Agency Rating
US FDA,
European Food Contact,
NSF-61,
KTW,
WRAS,
ACS,
W270 certified
Key Features
  • Adhesion, Good
  • Amorphous
  • Chemical resistance, Good
  • Dimensional stability, Good
  • Filled, Glass Fiber
  • Flame retarded
  • Food Contact Acceptable
  • Food contact approved
  • Heat Resistance, High
  • Hydrolytically Stable
  • Mechanical Properties, Good
  • Shrinkage, Low
  • Stiffness, High
  • Strength, High

ULTEM™ resin PW2100 (Europe) Properties

Mechanical Properties

Value & Unit
Test Condition
Test Method
Flexural Modulus
4500 MPa
(At 2 mm/min) 
ISO 178
Hardness, Ball Indentation
140 MPa
(H358/30) 
ISO 2039-1
Tensile Modulus
4500 MPa
(At 1 mm/min) 
ISO 527

ULTEM™ resin PW2100 (Europe) Processing Guidelines

Injection Molding Properties

Value & Unit
Test Condition
Test Method
Drying Temperature
150 °C
Drying Time
4 - 6 hr
Moisture Content
< 0.02 %

Want to list or
update your products?
Want to report errors or
suggest improvements?
Access Reliable
Product Information

Database of 99992 Plastics & Elastomers,
reviewed and updated daily

Improve your Product
Selection Experience

Open your choices, compare products,
ask for samples, contact suppliers

Keep-up with latest
Technical Solutions

Be inspired and never miss again crucial
innovations with our weekly email updates

Back to Top