The new engineering materials powerhouse

by SpecialChem

Chemlon® MDF604

Technical Datasheet | Supplied by Teknor Apex

Chemlon® MDF604 is an impact modified polyamide 6 (Nylon 6) grade reinforced with 20% glass fiber. Offers good balance of rigidity and toughness over a wide temperature range. Provides high performance in terms of stiffness and heat- & chemical- resistance. Is suitable for processing by injection molding. Used in automoive (under-hood, under-chassis, exterior, and interior components), buildings and construction industry (window hinge end cap, drapery and blind hardware, high impact roofing bolts, DIY wall plug fixtures, small diameter plumbing fittings, PVC Window frame fixtures, spacers and accessories and conservatory roof brackets). Complies with UL94.

Chemlon® MDF604 Properties

Electrical Properties

Value & Unit

Test Condition

Test Method

Surface Resistance

1.0E+14 ohm

IEC 60093

Volume Resistivity

1.0E+16 ohm-cm

IEC 60093

Dielectric Strength

16 kV/mm

IEC 60243-1

Injection Molding Properties

Value & Unit

Test Condition

Test Method

Drying Temperature

80.0 °C

Mold shrinkage

0.70 - 1.6 %

Drying Time

20 hr

Want to list or
update your products?

View the listing options

Want to report errors or
suggest improvements?

Send a Feedback

Products with the same brand name

View more (224)

Chemlon® MDF604

Chemlon® MDF604 Properties

Electrical Properties

Chemlon® MDF604 Processing Guidelines

Injection Molding Properties