The new engineering materials powerhouse

by SpecialChem

LLH1918B

Technical Datasheet | Supplied by Trademark Plastics

LLH1918B by Trademark Plastics is a barefoot linear low density polyethylene (LLDPE) grade with hexene co-monomer. Exhibits excellent strength, drawdown and heat seal. Designed for blown film extrusion method. LLH1918B is recommended for heavy duty sacks, liners and food- and commercial packaging. Complies with FDA regulations in 21 CFR, section 177.1520, paragraph C, section 3.1(a).

LLH1918B Properties

Physical Properties

Value & Unit

Test Condition

Test Method

Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)

1.0 gm/10min

(MI₂)

ASTM D1238

Specific Gravity

0.918 gm/cc

(Base polymer only)

ASTM D1505

Extrusion Properties

Value & Unit

Test Condition

Test Method

Blow up ratio (measured on a 1.0 mil)

2.5:1 -

Melt Temperature

375 - 425 °F

Want to list or
update your products?

View the listing options

Want to report errors or
suggest improvements?

Send a Feedback

LLH1918B

LLH1918B Properties

Physical Properties

LLH1918B Processing Guidelines

Extrusion Properties