The new engineering materials powerhouse

by SpecialChem

mLLD1918F

Technical Datasheet | Supplied by Trademark Plastics

mLLD1918F by Trademark Plastics is a metallocene linear low density polyethylene (mLLDPE) grade. Contains processing aid, high slip and antiblocking additives. Exhibits excellent haze, gloss, strength and heat seal. Designed for blown film extrusion method. mLLD1918F is recommended for enhancing monolayer films, seal layer in coextrusions, heavy duty- and high strength clarity packaging. Complies with FDA regulations in 21 CFR, section 177.1520, paragraph C, section 2.1.

mLLD1918F Properties

Physical Properties

Value & Unit

Test Condition

Test Method

Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)

1.0 gm/10min

(MI₂)

ASTM D1238

Specific Gravity

0.918 gm/cc

(Base polymer only)

ASTM D1505

Extrusion Properties

Value & Unit

Test Condition

Test Method

Blow up ratio (measured on a 1.0 mil)

2.5:1 -

Melt Temperature

360 - 400 °F

Want to list or
update your products?

View the listing options

Want to report errors or
suggest improvements?

Send a Feedback

mLLD1918F

mLLD1918F Properties

Physical Properties

mLLD1918F Processing Guidelines

Extrusion Properties