OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
27 956 products match your search
Product Name
Supplier
Description
TORELINA™ A504X90 by Toray is a branched polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. Offers excellent heat resistance... view more
Features
  • Flame resistance Good
  • Strength Good
TORELINA™ A673MTB (Black) by Toray is a black colored, linear polyphenylene sulfide (PPS) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Possesses high... view more
Features
  • Flow High
  • Toughness Ultra High
  • Dimensional stability Good
  • Strength Good
  • ...
TORELINA™ A675GS1B by Toray is an elastomer modified polyphenylene sulfide (PPS) grade reinforced with 50% glass fiber and mineral filler. It offers good heat-cycling resistance, high weld strength... view more
Features
  • Filled Mineral
  • Dimensional stability Good
  • Strength Good
  • Heat Resistance High
  • ...
TORELINA™ A670X01 by Toray is an unreinforced polyphenylene sulfide (PPS) natural grade with elastomer improvement. Possesses excellent heat resistance, flame retardancy, excellent chemical... view more
Features
  • Flame resistance Good
  • Strength Good
TORELINA™ A604CX1B by Toray is a polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It offers flame retardancy, excellent electrical properties, excellent dimensional stability, high... view more
Features
  • Moldability Good
  • Filled Glass Fiber
  • Flame retarded
  • Dimensional stability Good
  • ...
Rilsan® PA 11 Invent Nat by Arkema is a natural colored thermoplastic polyamide 11 (PA 11) fine powder. It is a high performance polyamide 100% sourced from a renewable raw material. Exhibits good... view more
Features
  • Ductile
  • Durable
  • Elasticity High
  • Impact resistance High
Platamid® HX 2592 F by Arkema is a bio-based specialty thermoplastic co-polyamide grade in undried form. Provides low to medium melt viscosity and is particularly suitable for manufacturing webs... view more
Applications
Features
  • Adhesion Good
  • Renewable Resource Content
Platamid® HX 2592 T by Arkema is a bio-based specialty thermoplastic co-polyamide grade in dried form. Provides low to medium melt viscosity and is particularly suitable for manufacturing webs... view more
Applications
Features
  • Adhesion Good
  • Renewable Resource Content
Rilsan® BESN BLACK P126 T6L by Arkema is a bio-based, flexible polyamide (PA) 11 produced from a renewable resource. It is heat-, light- and UV stabilized grade. It has high thermo-oxidative... view more
Features
  • Chemical resistance Good
  • Density Low
  • Dimensional stability Good
  • Durable
  • ...
Rilsan® BESN BLACK P20 TL by Arkema is a plasticized, polyamide 11 (PA 11/Nylon 11) with renewable resource content. It contains lubricants and plasticizer. This grade is a bio-based, light-, heat... view more
Features
  • Heat stabilized
  • Light Stabilized
  • Lubricated
  • Plasticized
  • ...
Asahi Kasei
LEONA™ SN103 by Asahi Kasei is a red phosphorous- & halogen-free, polyamide 66 and semi-aromatic polyamide grade reinforced with 30% glass fiber. It is suitable for processing by injection molding... view more
Features
  • Appearance Pleasing Surface
  • Filled Glass Fiber
  • Flow High
  • Halogen Free
  • ...
Asahi Kasei
LEONA™ SN105 by Asahi Kasei is a red phosphorous- & halogen-free, polyamide 66 and semi-aromatic polyamide grade reinforced with 50% glass fiber. It is suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
  • Halogen Free
  • Mechanical Properties Excellent
  • Phosphorous Free
  • ...
Asahi Kasei
LEONA™ SN11B by Asahi Kasei is a red phosphorous- & halogen-free, polyamide 66 and semi-aromatic polyamide grade reinforced with 25% glass fiber. It exhibits super laser printability, good... view more
Features
  • Appearance Pleasing Surface
  • Filled Glass Fiber
  • Flow High
  • Halogen Free
  • ...
BASF 3D Printing Solutions
Ultrafuse TPE 60D (Old Name: InnoFlex 60) by BASF 3D Printing Solutions is thermoplastic elastomer based filament for fused filament fabrication. It is made from Ecovio® and completely biodegradable... view more
Features
  • Biodegradable
BASF 3D Printing Solutions
Ultrafuse® 17-4 PH by BASF 3D Printing Solutions is a filament for the production of metal components on standard fused filament fabrication (FFF) printers. It enables stainless steel parts for... view more
Features
  • Corrosion Resistance Good
  • Hardness High
BASF 3D Printing Solutions
Ultrafuse® ABS Fusion+ by BASF 3D Printing Solutions is an easy-to-print acrylonitrile butadiene styrene (ABS) for fused filament fabrication (FFF) printing. It is an engineering filament with... view more
Features
  • Dimensional stability Good
  • Heat Resistance High
  • Printability Excellent
BASF 3D Printing Solutions
Ultrafuse® PAHT CF15 by BASF 3D Printing Solutions is a high temperature, 15% carbon fibers reinforced polyamide (PA) filament for fused filament fabrication (FFF) printing. Exhibits high... view more
Features
  • Chemical resistance High
  • Dimensional stability Good
  • Moisture Absorption Low
  • Printability Excellent
  • ...
BASF 3D Printing Solutions
Ultrafuse® PET CF15 by BASF 3D Printing Solutions is 15% carbon fiber filled polyethylene terephthalate (PET) filament for FFF 3D-print components. It combines easy processability and very low... view more
Features
  • Dimensional stability Good
  • Filled Carbon fiber
  • Moisture Absorption Low
  • Processability Good
  • ...
Viton™ F-605C by Chemours is fluoroelastomer terpolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene plus cure chemicals. It exhibits heat resistance, improved processing... view more
Features
  • Chemical resistance Good
  • Compression Set Low
  • Flow Good
  • Heat Resistance Good
  • ...
Viton™ VTR-9209 by Chemours is fluoroelastomer (FKM) precompound. It contains 69% of fluorine content. It is a copolymer of hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene plus... view more
Features
  • Adhesion Good
  • Copolymer
  • Fuel Resistant
  • Processability Good
  • ...
Viton™ VTR-9217 by Chemours is a low viscosity, low hardness, developmental precompound, fluoroelastomer (FKM) with superior extrusion processability. It contains 69% fluorine and incorporates a... view more
Features
  • Adhesion Good
  • Compression Set Low
  • Copolymer
  • Fuel Resistant
  • ...
ECONAMID® PLUS 6G30H2 BK by DOMO Chemicals is a heat-aging stabilized, 30% glass fiber reinforced polyamide 6 grade. Designed for engineering plastics, automotive, industrial and consumer goods... view more
Features
  • Filled Glass Fiber
TECHNYL STAR® AF 218 V30 BLACK 21N by DOMO Chemicals is a heat stabilized, high flow polyamide 66 (PA 66) grade reinforced with 30% glass fiber. Ideal for MuCell® injection molding technology... view more
Features
  • Filled Glass Fiber
  • Flow High
  • General purpose
  • Heat stabilized
  • ...
TECHNYL STAR® AF 218 V35 BLACK 21N is a heat stabilized, 35% glass fiber filled, high flow polyamide 66 (PA 66) grade by DOMO Chemicals. Offers exceptional processing behavior and excellent surface... view more
Features
  • Filled Glass Fiber
  • Flow High
  • General purpose
  • Heat stabilized
  • ...
TECHNYL STAR® AF 219 V30 BLACK by DOMO Chemicals is a high flow, heat stabilized polyamide 66 (PA 66) grade filled with 30% glass fiber. Ideal for MuCell® injection molding technology. Exhibits... view more
Features
  • Corrosion Resistance Good
  • Filled Glass Fiber
  • General purpose
  • Heat stabilized
  • ...
TECHNYL STAR® SX 218 V50 BLACK Z by DOMO Chemicals is a patented high flow, heat stabilized polyamide 6 (PA 6) grade reinforced with 50% glass fiber. Offers high stiffness, good dimensional... view more
Features
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
  • ...
Akulon® Diablo HDT2500 BK00001 by DSM is a heat stabilized, 35% glass reinforced polyamide 66 and polyamide 6 alloy. Exhibits thermo-oxidative stability and good chemical resistance for various... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Filled Glass Fiber
Akulon® Diablo HT-HG0 is a heat stabilized, 50% glass reinforced, non-flame retardant polyamide 66 and polyamide 6 alloy by DSM. Suitable for processing by injection molding. Used in charge air... view more
Features
  • Heat stabilized
  • Stiffness High
  • Strength High
  • Filled Glass Fiber
Akulon® Diablo HT-HG6 is a heat stabilized, non-flame retardant, 30% glass reinforced polyamide 66 and polyamide 6 alloy by DSM. Used in charge air cooler caps, integrated air inlet manifolds (up to... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
Akulon® F223-D by DSM is a low/medium viscosity, general-purpose, polyamide 6-grade containing release agent. It is processed by injection molding. It exhibits good chemical resistance. It is... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • General purpose
  • Viscosity Medium
Akulon® Fuel Lock FL-LP by DSM is a UV stabilized, low fuel permeation polyamide 6 grade. Offers good chemical resistance and weather stability. It can be processed using extrusion and injection... view more
Back to Top