OK
The Universal Selection Source:
Plastics & Elastomers
328 products match your search
Product Name
Supplier
Description
QR Resin QR-9000-GF30 is a natural or black colored, heat stabilized polyamide (PA) 4-6 reinforced with 30% glass fiber. Possesses good strength, good stiffness and high heat resistance. Exhibits... view more
Applications
  • Injection molding - thermoplastics
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat Resistance High
  • Heat stabilized
  • ...
QR Resin QR-9046-GF15 by A. Schulman is a natural or black colored, heat stabilized polyamide (PA) 4-6 filled with 15% glass fiber. Exhibits good oil and chemical resistance. Possesses good... view more
Applications
  • Injection molding - thermoplastics
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat Resistance High
  • Heat stabilized
  • ...
ALCOM® PA46 920-1 PTFE15 is a polyamide 4.6 grade reinforced with 15% PTFE. Exhibits improved sliding/wear and high heat aging stabilization. Is suitable for processing by injection molding... view more
Applications
  • Automotive
  • Injection molding - thermoplastics
Features
  • Filled
  • Heat Aging Resistance Good
  • Slidability
Angst+Pfister
APSOplast® PA 46 by Angst+Pfister is a reddish-brown colored, polyamide 4-6 [PA 4-6] grade. Exhibits high impact- and medium wear resistance. Possesses medium suitability for outdoors and high for... view more
Applications
  • Renewable energy equipment>Solar
  • Renewable energy equipment>Wind
  • Transportation>Railways
  • Agriculture
  • ...
Features
  • Dimensional stability Good
  • Hardness Good
  • Impact resistance High
  • Wear resistance Good
Stanyl® 46HF4130 is a lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. Is suitable for processing by injection molding. Possesses high flow, low friction... view more
Applications
  • Aerospace/ Aircrafts
  • Injection molding - thermoplastics
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Cycle Time Short
  • Electrical Properties Good
  • ...
Stanyl® 46HF4530 is a lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. Is suitable for processing by injection molding. Possesses high flow, low friction... view more
Applications
  • Electronics / Computers
  • Electrical markets
  • Injection molding - thermoplastics
Features
  • Abrasion resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® 46HF4550 is a lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 50% glass fiber. Is suitable for processing by injection molding. Possesses high flow, low friction... view more
Applications
  • Electronics / Computers
  • Electrical markets
  • Injection molding - thermoplastics
Features
  • Abrasion resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® 46HF5040 is a flame retardant, lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. Is suitable for processing by injection molding. Possesses high flow... view more
Applications
  • Electrical markets>Sockets
  • Electronics / Computers
  • Electrical markets>Housings
  • Electrical markets>Bobbins
  • ...
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® 46HF5041LW is a flame retardant, lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. Is suitable for processing by injection molding. Possesses high... view more
Applications
  • Electronics / Computers
  • Gears
  • Automotive
  • Electrical markets
  • ...
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
TECAMID® 46 AL Beige is a semi-crystalline polyamide 46 (PA 46) grade reinforced with mineral filler & PTFE. Exhibits low static friction, good damping, toughness and good thermal stability. Shows... view more
Applications
  • Automotive
  • Engineering / manufacturing>Belts, conveyors
  • Gears
  • Injection molding - thermoplastics
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalline Semi
  • Dimensional stability Good
  • ...
TECAMID® 46 Red Brown is a semi-crystalline polyamide 46 (PA 46) grade. Exhibits high strength & toughness, resistance to hot water, bases, oils, greases & fuels, good heat deflection temperature... view more
Applications
  • Engineering / manufacturing>Belts, conveyors
  • Automotive
  • Extrusion
Features
  • Base Resistant
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalline Semi
  • ...
Formulated Polymers
FORMPOLY® N46GF15 by Formulated Polymers is a heat stabilized polyamide 46 (PA 46) resin reinforced with 15% glass fiber. Exhibits fatigue resistance, low odor, general chemical resistance and high... view more
Features
  • Chemical resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • Heat Resistance High
  • ...
Formulated Polymers
FORMPOLY® N46GF15FR by Formulated Polymers is a heat stabilized flame retardant polyamide 46 (PA 46) resin reinforced with 15% glass fiber. Exhibits anti-dripping properties and moderate strength... view more
Applications
  • Electrical markets>Connectors
  • Electronics / Computers
  • Automotive
  • Electrical markets>Bobbins
Features
  • Filled Glass Fiber
  • Flame retarded
  • Strength Good
Formulated Polymers
FORMPOLY® N46GF30 by Formulated Polymers is a heat stabilized polyamide 46 (PA 46) resin reinforced with 30% glass fiber. Exhibits fatigue resistance, low odor, general chemical resistance and high... view more
Features
  • Chemical resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • Heat Resistance High
  • ...
Formulated Polymers
FORMPOLY® N46GF30FR by Formulated Polymers is a heat stabilized flame retardant polyamide 46 (PA 46) resin reinforced with 15% glass fiber. Exhibits fatigue resistance, low odor, general chemical... view more
Applications
  • Electrical markets>Connectors
  • Electronics / Computers
  • Automotive
  • Electrical markets>Bobbins
Features
  • Chemical resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • Flame retarded
  • ...
Formulated Polymers
FORMPOLY® N46GF50 by Formulated Polymers is a heat stabilized polyamide 46 (PA 46) resin reinforced with 50% glass fiber. Exhibits fatigue resistance, low odor, general chemical resistance and high... view more
Features
  • Chemical resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • Heat Resistance High
  • ...
Nylon 11 is made 100% from the components of castor oil, and is thus wholly bio-based. ECOGEHR® Nylon 11 possesses similar properties to Nylon 12, and an excellent status with respect to... view more
Nylon 11 is made 100% from the components of castor oil, and is thus wholly bio-based. ECOGEHR® Nylon 11 possesses similar properties to Nylon 12, and an excellent status with respect to... view more
PA 46 is primarily used in higher temperature ranges where stiffness, creep resistance, continuous heat stability and fatigue strength are required. Therefore PA 46 is suitable for high quality... view more
Feature: Injection Molding, Flame Retardant PA AlloyApplication: E&E parts... view more
Lehmann & Voss
LUVOCOM® 19-7276 VP by Lehmann & Voss is an electrically conductive, natural/ black colored polyamide 4-6 (Nylon 4-6, PA 4-6) grade reinforced with carbon fiber and polytetrafluoroethylene (PTFE)... view more
Applications
  • Engineering / manufacturing
  • Fibers/ Textiles/ Carpets
  • Agriculture
  • Automotive
  • ...
Features
  • Electrically Conductive
  • Filled Carbon fiber
  • Stiffness High
  • Strength Good
Lehmann & Voss
LUVOCOM® 19-7277 VP by Lehmann & Voss is an electrically conductive, natural/ black colored polyamide 4-6 (Nylon 4-6, PA 4-6) grade reinforced with carbon fiber and polytetrafluoroethylene (PTFE)... view more
Applications
  • Automotive
  • Engineering / manufacturing
  • Fibers/ Textiles/ Carpets
  • Gears
  • ...
Features
  • Electrically Conductive
  • Filled Carbon fiber
  • Stiffness High
  • Strength Good
Lehmann & Voss
LUVOCOM® 19-7278 by Lehmann & Voss is a natural/ black colored, electrically conductive polyamide 4-6 (Nylon 4-6, PA 4-6) grade reinforced with carbon fiber. Exhibits good strength, stiffness, low... view more
Applications
  • Fibers/ Textiles/ Carpets
  • Gears
  • Automotive
  • Engineering / manufacturing
  • ...
Features
  • Electrically Conductive
  • Filled Carbon fiber
  • Stiffness High
  • Strength Good
Lehmann & Voss
LUVOCOM® 19-7319 by Lehmann & Voss is a natural/ black colored, electrically conductive polyamide 4-6 (Nylon 4-6, PA 4-6) grade reinforced with carbon fiber and polytetrafluoroethylene (PTFE)... view more
Applications
  • Automotive
  • Engineering / manufacturing
  • Gears
  • Injection molding - thermoplastics
Features
  • Dimensional stability Good
  • Electrically Conductive
  • Filled Carbon fiber
  • Stiffness High
  • ...
Lehmann & Voss
LUVOCOM® 19-7330 VP by Lehmann & Voss is a dark grey colored, lubricated polyamide 4-6 (Nylon 4-6, PA 4-6) grade. It is reinforced with polytetrafluoroethylene (PTFE). Exhibits reduced moment of... view more
Applications
  • Automotive
  • Engineering / manufacturing
  • Gears
  • Injection molding - thermoplastics
Features
  • Dimensional stability Good
  • Filled
  • Lubricated
The use of this highly temperature resistant polyamide enables reliable operation up to a constant service temperature of 155°C . The material retains its rigidity and creep strength over the entire... view more
OpteSTAT™ PA4,6 DP505x3 by Ovation Polymers is a polyamide 4.6 (PA 4,6) resin reinforced with carbon nanotube filler. Exhibits good conductivity at minimal nanotube loadings, achieving exceptional... view more
Features
  • Electrically Conductive
  • Filled
PENTAMID® AHT GV25 H1 non-colored by Pentac Polymer is a heat stabilized, water insoluble polyamide 4.6 (PA 4.6) grade reinforced with 25% glass fiber. Possesses normal viscosity, easy flowability... view more
Applications
  • Gears
  • Electrical markets>Housings
  • Automotive
  • Injection molding - thermoplastics
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalinity High
  • Fatigue Resistant
  • ...
PENTAMID® AHT GV30 H MOS non-colored by Pentac Polymer is a heat stabilized, water insoluble, molybdenum disulphide lubricated polyamide 4.6 (PA 4.6) grade reinforced with 30% glass fiber. Possesses... view more
Applications
  • Engineering / manufacturing
  • Gears
  • Automotive
  • Electrical markets>Housings
  • ...
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalinity High
  • Fatigue Resistant
  • ...
PENTAMID® AHT GV30 H TF15 black by Pentac Polymer is a heat stabilized, water insoluble, polytetrafluoroethylene (PTFE) modified polyamide 4.6 (PA 4.6) grade reinforced with 30% glass fiber... view more
Applications
  • Engineering / manufacturing
  • Gears
  • Automotive
  • Electrical markets>Housings
  • ...
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalinity High
  • Fatigue Resistant
  • ...
PENTAMID® AHT GV30 H TF15 natural by Pentac Polymer is a heat stabilized, water insoluble, polytetrafluoroethylene (PTFE) modified polyamide 4.6 (PA 4.6) grade reinforced with 30% glass fiber... view more
Applications
  • Engineering / manufacturing
  • Gears
  • Automotive
  • Electrical markets>Housings
  • ...
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalinity High
  • Fatigue Resistant
  • ...
PENTAMID® AHT GV30 H1 black by Pentac Polymer is a black colored, heat stabilized, water insoluble polyamide 4.6 (PA 4.6) grade reinforced with 30% glass fiber. Possesses normal viscosity, easy... view more
Applications
  • Automotive
  • Electrical markets>Housings
  • Gears
  • Injection molding - thermoplastics
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalinity High
  • Fatigue Resistant
  • ...
Nylatron® 4.6 PA46 is a reddish-brown colored polyamide 4.6 (nylon 4.6). Offers superior heat aging and creep resistance and retention of stiffness up to 300°F. Exhibits high mechanical strength... view more
Applications
  • Gears
  • Engineering / manufacturing>Belts, conveyors
  • Extrusion
Features
  • Creep Resistance High
  • Electrically Insulating
  • Fatigue Resistant
  • Hardness High
  • ...
Compared with conventional nylons, Ertalon 4.6 features a better retention of stiffness and creep resistance over a wide range of temperatures as well as superior heat ageing resistance. Therefore... view more
Compared with conventional nylons, Nylatron 4.6 features a better retention of stiffness and creep resistance over a wide range of temperatures as well as superior heat aging resistance. Nylatron... view more
Conductive - Heat StableComments:ConductiveESD ProtectionHeat StabilizedUnless otherwise specified, all data listed is for natural or black colored materials. Pigments can affect... view more
Aramid Fiber 15% - PTFE 15% - Heat StableComments:Aramid FiberPTFE LubricatedHeat Stabilized(Dry As Molded)Unless otherwise specified, all data listed is for natural or black colored materials... view more
Lubricated - Heat StableComments:Heat StabilizedLubricated(Dry As Molded)Unless otherwise specified, all data listed is for natural or black colored materials. Pigments can affect... view more
PTFE 15% - Heat StableComments:PTFE LubricatedHeat Stable(Dry As Molded)Unless otherwise specified, all data listed is for natural or black colored materials. Pigments can affect... view more
Base ResinComments:Unfilled(Dry As Molded)Unless otherwise specified, all data listed is for natural or black colored materials. Pigments can affect properties.Information provided by RTP Company... view more
Röchling Group
SUSTAMID® 46 is a brown colored polyamide 4-6 (Nylon 4-6) grade. Exhibits high absorption of moisture of up to 3.5 % in standard atmosphere, increased impact resistance, excellent sliding... view more
Applications
  • Automotive
  • Electrical markets>Electrical motors
  • Electrical markets>Switches
  • Engineering / manufacturing
  • ...
Features
  • Abrasion resistance High
  • Adhesion Good
  • Impact resistance High
  • Machinable
  • ...
LNP™ LUBRICOMP™ Compound 9X06483 by SABIC is a heat stabilized, wear resistant polyamide 4-6 (PA 4-6) grade reinforced with polytetrafluoroethylene (PTFE). LNP™ LUBRICOMP™ Compound 9X06483 can help... view more
Features
  • Filled
  • Heat stabilized
  • Noise Damping
  • Wear resistance Good
LNP* LUBRICOMP* 9X06030 is a compound based on PA46 resin containing PTFE and Carbon Fiber. Added features include: Internally Lubricated, Heat Stabilized... view more
LNP* Lubricomp* 9X06483 is a compound based on a Nylon 4/6 containing PTFE. Added feature of this grade is: Heat Stabilized... view more
LNP* Lubricomp* 9X98026 is a compound based on PA4.6 resin containing Barium Sulfate, PTFE and Carbon Fiber... view more
LNP* THERMOCOMP* KFB41 is a compound based on Acetal Copolymer resin containing Glass Fiber, Glass Bead... view more
Availability: North AmericaForms: PelletsFeatures: Flame Retardant TPCI# 8277150... view more
Availability: North AmericaForms: PelletsAdditive: Heat StabilizerFeatures: Flame Retardant and Heat StabilizedTPCI# 8277150... view more
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 15% Filler by WeightAdditive: Heat Stabilizer and LubricantFeatures: Flame Retardant, Lubricated and Heat... view more
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 15% Filler by WeightAdditive: Heat Stabilizer and LubricantFeatures: Flame Retardant, Lubricated and Heat... view more
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 30% Filler by WeightAdditive: Heat Stabilizer Features: Flame Retardant and Heat StabilizedUL File Number:... view more
Techmer Engineered Solutions (Techmer PM)
HiFill FR® PA4/6 FR HS is a flame retardant, heat stabilized polyamide PA 4/6 grade. Is suitable for processing by injection molding. Complies with RoHS-2 and REACH regulations... view more
Applications
  • Injection molding - thermoplastics
Features
  • Flame retarded
  • Heat stabilized
Techmer Engineered Solutions (Techmer PM)
HiFill FR® PA4/6 GF15 FR HS L is a flame retardant, heat stabilized polyamide PA 4/6 grade reinforced with 15 % glass fiber. Is lubricated and can be processed by injection molding. Complies with... view more
Applications
  • Injection molding - thermoplastics
Features
  • Filled Glass Fiber
  • Flame retarded
  • Heat stabilized
  • Lubricated
Techmer Engineered Solutions (Techmer PM)
HiFill FR® PA4/6 FR HS is a flame retardant, heat stabilized polyamide PA 4/6 grade reinforced with 30 % glass fiber. Is suitable for processing by injection molding. Complies with RoHS-2, REACH and... view more
Applications
  • Injection molding - thermoplastics
Features
  • Filled Glass Fiber
  • Flame retarded
  • Heat stabilized
Techmer Engineered Solutions (Techmer PM)
HiFill® PA4/6 FR HS is a flame retardant polyamide PA 4/6 grade. Is suitable for processing by injection molding. Complies with RoHS-2 and REACH regulations... view more
Applications
  • Injection molding - thermoplastics
Features
  • Flame retarded
Techmer Engineered Solutions (Techmer PM)
HiFill® PA4/6 GF30 HS NAT is a heat stabilized polyamide PA 4/6 grade reinforced with 30 % glass fiber. Is suitable for processing by injection molding. Used in 3D-printing market and large-part... view more
Applications
  • Injection molding - thermoplastics
  • 3D Printing/Additive Manufacturing
Features
  • Filled Glass Fiber
  • Heat stabilized
Back to Top