OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
576 products match your search
Product Name
Supplier
Description
A. Schulman (LyondellBasell)
SCHULAMID® 612 CS 4404 is a high impact modified polyamide 6-12 (PA 6-12) grade. Exhibits heat stabilization, hydrolysis resistance, high stiffness, dynamic strength & temperature resistance... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Electrical Properties Good
  • ESCR High Stress Crack Resist
  • ...
A. Schulman (LyondellBasell)
SCHULAMID® 612 FS 4003 is an unreinforced, heat stabilized polyamide 6-12 (PA 6-12) grade. Exhibits high stiffness, dynamic strength & temperature resistance, excellent impact resistance, very good... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Electrical Properties Good
  • Heat Resistance High
  • ...
A. Schulman (LyondellBasell)
SCHULAMID® 612 FS 4003 is a high impact modified polyamide 6-12 (PA 6-12) grade. Exhibits very good long term heat stabilization, high stiffness, dynamic strength & temperature resistance, excellent... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Electrical Properties Good
  • ESCR High Stress Crack Resist
  • ...
A. Schulman (LyondellBasell)
SCHULAMID® 612 FS 4104 is a high viscosity, high impact modified, fuel- & oil resistant polyamide 6-12 (PA 6-12) grade. Exhibits electrical neutral heat stabilization, good heat aging- & corrosion... view more
Applications
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Corrosion Resistance Good
  • Dimensional stability Good
  • ...
A. Schulman (LyondellBasell)
SCHULAMID® 612 FS 5003 MC is a high impact modified polyamide 6-12 (PA 6-12) grade. Exhibits heat stabilization, high stiffness, dynamic strength & temperature resistance, excellent impact... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Electrical Properties Good
  • ESCR High Stress Crack Resist
  • ...
ORGASOL® 3501 EXD NAT 1 by Arkema is a spheroidal powder of copolyamide 6/12 with narrow particle size distribution. It can rigorously control particle size distribution and provides excellent... view more
Features
  • Porous
  • Printability Excellent
  • Strength High
ORGASOL® 3502 D NAT 1 by Arkema is a spheroidal powder of copolyamide 6/12 with narrow particle size distribution. It can rigorously control particle size distribution and provides excellent... view more
Features
  • Abrasion resistance Good
  • Porous
  • Scratch Resistance Good
  • Strength High
Rilsamid® DECNO by Arkema is a polyamide 6-12 (PA 6-12 / Nylon 6-12) grade. Suitable for use in moisturized conditions... view more
Rilsamid® DESNO by Arkema is a polyamide 6-12 (PA 6-12 / Nylon 6-12) grade. Suitable for use in moisturized conditions... view more
Rilsamid® DESNO F by Arkema is a polyamide 6-12 (PA 6-12 / Nylon 6-12) grade. Suitable for use in moisturized conditions... view more
Ashley Polymers
Ashlene® 980L is a general purpose polyamide 6-12 (Nylon 6-12) grade with low moisture absorption and excellent dimensional stability. Is suitable for processing by injection molding. Used critical... view more
Features
  • Dimensional stability Good
  • General purpose
  • Moisture Absorption Low
Ashley Polymers
Ashlene® 980LS is a heat stabilized polyamide 6-12 (Nylon 6-12) grade. It is modified for protection against embrittlement at high temperatureas. Is suitable for processing by injection molding... view more
Features
  • Heat stabilized
Ashley Polymers
Ashlene® 980LS-33G is a polyamide 6-12 (Nylon 6-12) grade reinforced with glass. Exhibits very good low temperature properties, toughness and strength under conditions of pressure as well as... view more
Features
  • Filled
  • Strength Good
  • Toughness Good
  • Warpage Low
Ashley Polymers
Ashlene® 980LS-40G is a polyamide 6-12 (Nylon 6-12) grade reinforced with glass. Exhibits very good low temperature properties, toughness and strength under conditions of pressure as well as... view more
Features
  • Filled
  • Strength Good
  • Toughness Good
  • Warpage Low
Ashley Polymers
Ashlene® 980LS-43G is a polyamide 6-12 (Nylon 6-12) grade reinforced with glass. Exhibits very good low temperature properties, toughness and strength under conditions of pressure as well as... view more
Features
  • Filled
  • Strength Good
  • Toughness Good
  • Warpage Low
Badamid® PA612 is a water insoluble, odorless, chemically stable polyamide (PA) 6-12. It is suitable for processing by injection molding. Badamid® PA612 by Bada AG complies with UL 94 HB flame... view more
Features
  • Odor Low to None
Badamid® PA612 CF30 is a water insoluble, odorless, 30% carbon fiber reinforced polyamide (PA) 6-12. It is chemically stable. Badamid® PA612 CF30 by Bada AG is suitable for processing by injection... view more
Features
  • Filled
  • Odor Low to None
Badamid® PA612 GF30 is a water insoluble, odorless polyamide (PA) 6-12 reinforced with 30% glass fiber. It is chemically stable. Badamid® PA612 GF30 by Bada AG is suitable for processing by... view more
Features
  • Filled Glass Fiber
  • Odor Low to None
Badamid® PA612 GF33 is a water insoluble, odorless polyamide (PA) 6-12 reinforced with 33% glass fiber. It is chemically stable. Badamid® PA612 GF33 by Bada AG is suitable for processing by... view more
Features
  • Filled Glass Fiber
  • Odor Low to None
Badamid® PA612 GF50 is a water insoluble, odorless polyamide (PA) 6-12 reinforced with 50% glass fiber. It is chemically stable. Badamid® PA612 GF50 by Bada AG is suitable for processing by... view more
Features
  • Filled Glass Fiber
  • Odor Low to None
Cast Nylons
NYCAST® 6PA MPB by Cast Nylons is a water-insoluble, impact modified PA (polyamide) 6 grade. Exhibits high tensile elongation, resistance to brittleness & deterioration and noise dampening. It can... view more
Features
  • Elongation High
  • Impact modified
  • Noise Damping
Cast Nylons
NYCAST® 6PA MPY by Cast Nylons is a water-insoluble, impact modified PA (polyamide) 6 grade. Exhibits high tensile elongation, resistance to brittleness & deterioration and noise dampening. It can... view more
Features
  • Elongation High
  • Impact modified
  • Noise Damping
Cast Nylons
NYCAST® CP 6/12 by Cast Nylons is a water-insoluble, easy to machine, highly resilient PA (polyamide) 6/12 grade. Exhibits higher tensile elongation & impact strength, superior dimensional... view more
Features
  • Dimensional stability Good
  • Elongation High
  • Impact resistance High
  • Machinable
  • ...
CP PRYME® Nylon 612 NST133(HS)L is a 33% glass fiber reinforced and lubricated polyamide 6-12 resin. Processed by injection molding. Recommended for general purpose applications... view more
Features
  • Filled Glass Fiber
  • Lubricated
CP PRYME® Nylon 612 NST143G is a 43% glass fiber reinforced polyamide 6-12 resin... view more
Features
  • Filled Glass Fiber
Zytel® 151 NC010 by DuPont is an unreinforced polyamide 6-12 (PA 6-12, Nylon 6-12) grade available in the form of pellets. Zytel® 151 NC010 is suitable for processing by injection molding and... view more
Zytel® 151L NC010 by DuPont is an unreinforced, lubricated polyamide 6-12 (PA 6-12, Nylon 6-12) grade with good mold release. Is available in the form of pellets. Zytel® 151L NC010 is suitable for... view more
Features
  • Mold Release Good
  • Lubricated
Zytel® 153HSL NC010 by DuPont is an unreinforced, heat stabilized, lubricated polyamide 6-12 (PA 6-12, Nylon 6-12) grade. It is available in the form of pellets. Zytel® 153HSL NC010 is suitable for... view more
Features
  • Heat stabilized
  • Lubricated
Zytel® 157HSL BK010 by DuPont is an unreinforced, heat stabilized polyamide 6-12 (PA 6-12, Nylon 6-12) grade with good mold release. It is available in the form of pellets. Zytel® 157HSL BK010 is... view more
Features
  • Mold Release Good
  • Heat stabilized
Zytel® 158 NC010 by DuPont is a natural colored, unreinforced polyamide 6-12 (PA 6-12, Nylon 6-12) grade available in the form of pellets. Zytel® 158 NC010 is suitable for processing by injection... view more
EMS-Grivory (EMS Group)
Grilamid® 2D 20 Natural is a medium viscosity, low density polyamide 6-12(PA6-12), created through poly-condensation of hexamethylene diamine and dodecanedioic acid. It shows moderate water... view more
Features
  • Chemical resistance Good
  • Density Low
  • Dimensional stability Good
  • Ductile
  • ...
EMS-Grivory (EMS Group)
Grilamid® 2D 25 H HM Black 9992 by EMS-Grivory (EMS Group) is a high viscosity, heat stabilized and UV stabilized polyamide 6-12 (PA 6-12) grade. Exhibits high abrasion resistance, low moisture... view more
Features
  • Abrasion resistance High
  • Adhesion Good
  • Chemical resistance Good
  • Flexibility Good
  • ...
Grilamid® 2D 25 W 20 HL X Black 9992 is a plasticized, semi-flexible, high viscosity polyamide 6-12 (PA-612) grade, created through poly-condensation of hexamethylene diamine and dodecanedioic acid... view more
Features
  • Chemical resistance Good
  • Density Low
  • Flexibility Medium
  • Heat Resistance High
  • ...
EMS-Grivory (EMS Group)
Grilamid® 2D 25 W 20 X BLACK 9992 is a plasticized, semi-flexible, light stabilized and impact modified polyamide 612 (PA-612) grade, created through poly-condensation of hexamethylene diamine and... view more
Features
  • Chemical resistance Good
  • Density Low
  • Flexibility Medium
  • Heat Resistance High
  • ...
EMS-Grivory (EMS Group)
Grilamid® 2D 25 W 20 X Natural is a plasticized, semi-flexible, light stabilized and impact modified polyamide 612 (PA-612) grade, created through poly-condensation of hexamethylene diamine and... view more
Features
  • Chemical resistance Good
  • Density Low
  • Flexibility Medium
  • Heat Resistance High
  • ...
Ensinger
TECAMID® 612 is a PA (polyamide) 612 grade. It exhibits good wear resistance, low moisture absorption, good dimensional stability and good mechanical properties. It can be processed using extrusion... view more
Features
  • Dimensional stability Good
  • Moisture Absorption Low
  • Wear resistance Good
Type 6/12 has lower moisture absorption rates than nylon 6/6, hence superior dimensional stability.Information provided by Ensinger, Inc... view more
VESTAMID® D16 by Evonik is a food contact acceptable, low viscosity, polyamide 6-12 (PA 6-12) based specialty grade. Exhibits resistance to fuel-, good abrasion-, grease-, high environment stress... view more
Features
  • Abrasion resistance Good
  • ESCR High Stress Crack Resist
  • Food Contact Acceptable
  • Fuel Resistant
  • ...
VESTAMID® D18 by Evonik is a food contact acceptable, medium viscosity, polyamide 6-12 (PA 6-12) based specialty grade. Exhibits resistance to fuel-, good abrasion-, grease-, high environment stress... view more
Features
  • Abrasion resistance Good
  • ESCR High Stress Crack Resist
  • Food Contact Acceptable
  • Fuel Resistant
  • ...
VESTAMID® D22 by Evonik is a food contact acceptable, high viscosity, polyamide 6-12 (PA 6-12) based specialty grade. Exhibits resistance to fuel-, good abrasion-, grease-, high environment stress... view more
Features
  • Abrasion resistance Good
  • ESCR High Stress Crack Resist
  • Food Contact Acceptable
  • Fuel Resistant
  • ...
VESTAMID® D26 by Evonik is a food contact acceptable, high viscosity, polyamide 6-12 (PA 6-12) based specialty grade. Exhibits resistance to fuel-, good abrasion-, grease-, high environment stress... view more
Applications
Features
  • Abrasion resistance Good
  • ESCR High Stress Crack Resist
  • Food Contact Acceptable
  • Fuel Resistant
  • ...
VESTAMID® DX9300 by Evonik is a food contact acceptable, low viscosity, heat stabilized polyamide 6-12 (PA 6-12) based specialty grade. Exhibits resistance to fuel-, good abrasion-, grease-, high... view more
Features
  • Abrasion resistance Good
  • ESCR High Stress Crack Resist
  • Food Contact Acceptable
  • Fuel Resistant
  • ...
Cast nylons are generally accepted as the primary engineering polymer, suitable for virtually any plain bearing application. By varying the conditions of polymerisation the mechanical properties of... view more
Infinity LTL (Americhem)
INLUBE PA612CF30TF13SI2 by Infinity LTL Americhem is a polyamide 6/12 (PA 6-12, Nylon 6-12) grade reinforced with 30 % carbon fiber. It is internally lubricated with 2 % silicone and 13 %... view more
Features
  • Durable
  • Filled Carbon fiber
  • Friction Low
  • Lubricated
  • ...
Infinity LTL (Americhem)
INLUBE PA612GF30TF13SI2 by Infinity LTL Americhem is a polyamide 6/12 (PA 6-12, Nylon 6-12) grade reinforced with 30 % glass fiber. Is internally lubricated with 2 % silicone and 13 %... view more
Features
  • Durable
  • Filled Glass Fiber
  • Friction Low
  • Lubricated
  • ...
Infinity LTL (Americhem)
INSTRUC PA612GF10 by Infinity LTL Americhem is a polyamide 6/12 (PA 6-12, Nylon 6-12) grade reinforced with 10 % glass fiber. Possesses good strength & stiffness and offers increased heat deflection... view more
Features
  • Creep Resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Heat Resistance High
  • ...
Infinity LTL (Americhem)
INSTRUC PA612GF20 by Infinity LTL Americhem is a polyamide 6/12 (PA 6-12, Nylon 6-12) grade reinforced with 20 % glass fiber. Possesses good strength & stiffness and offers increased heat deflection... view more
Features
  • Creep Resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Heat Resistance High
  • ...
Infinity LTL (Americhem)
INSTRUC PA612GF30 by Infinity LTL Americhem is a polyamide 6/12 (PA 6-12, Nylon 6-12) grade reinforced with 30 % glass fiber. Possesses good strength & stiffness and offers increased heat deflection... view more
Features
  • Creep Resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Heat Resistance High
  • ...
LATAMID SP2 H2 G/35 is a heat stabilized polyamide 6.12 (PA6.12) based compound reinforced with 35% glass fibers. Provides low moisture absorption. Is suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Moisture Absorption Low
LATAMID SP2 H2 G/45 is a heat stabilized polyamide 6.12 (PA6.12) based compound reinforced with 45% glass fibers. Provides low moisture absorption. Is suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Moisture Absorption Low
Features: Thermally ConductiveForms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company... view more
LTL Color Compounders
ColorRx® NY4-1000RX by LTL Color Compounders is a biocompatible nylon 6-12 grade. ColorRx® NY4-1000RX is recommended for healthcare applications. It complies with the USP Class VI and ISO 10993-1... view more
Features
  • Biocompatible
Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage... view more
Megalon® PA6/12 GF33L BK by Mega Polymers is a black colored polyamide 6-12 (PA 6-12) reinforced with 33% glass fiber. Exhibits low moisture absorption and greater dimensional stability. Megalon®... view more
Features
  • Dimensional stability Good
  • Filled Glass Fiber
  • Moisture Absorption Low
Mega Polymers
Megalon® PA6/12HSL by Mega Polymers is a heat stabilized, lubricated polyamide 6-12 (PA 6-12) grade. Is suitable for processing by injection molding... view more
Features
  • Heat stabilized
  • Lubricated
Aquanyl is a copolymer of Nylon 6 and Nylon 12 produced via the anionic polymerization process using the monomer's Caprolactam and Laurinlactam. It has reduced water absorption, improved stability... view more
NYLENE® 8100 is a nylon 6/12 grade. Possesses high toughness, flexibility and impact strength. Exhibits melt stability, low moisture absorption and good melt strength. Provides high grease... view more
Features
  • Abrasion resistance High
  • Flexibility High
  • Grease Resistant
  • Melt Stability High
  • ...
NYLENE® 9533 is a nylon 6-12 grade. Possesses high stiffness, low moisture absorption, high melt stability and good melt strength. Provides good grease-, abrasion and food odor resistance. Is... view more
Features
  • Abrasion resistance High
  • Grease Resistant
  • Melt Stability High
  • Melt Strength Good
  • ...
NYLENE® 9543 is a heat stabilized nylon 6-12 grade reifnorced with 43 % glass fiber. Possesses high toughness, strength and stiffness. Exhibits melt stability, low moisture absorption and good melt... view more
Features
  • Abrasion resistance High
  • Filled Glass Fiber
  • Grease Resistant
  • Heat stabilized
  • ...
Description: Nylene® 8100 is an unfilled specialty fiber. Information provided by Custom Resins... view more
Nytef Plastics
UNIPA® Im is a nylon 6/12 grade by Nytef Plastics. Shows low moisture absorption and superior abrasion-, chemical- & impact resistance. It can be easily machined & fabricated and is available in a... view more
Features
  • Abrasion resistance High
  • Chemical resistance Good
  • Impact resistance High
  • Machinable
  • ...
Omni Plastics (Celanese)
OmniLon™ PA612 GR33 HS is a heat stabilized polyamide 6-12 (PA6/12) grade reinforced with 33% glass fibers. Possesses high durability, good strength, surface appearance and processability. Exhibits... view more
Features
  • Chemical resistance Good
  • Durable
  • Filled Glass Fiber
  • Heat stabilized
  • ...
Omni Plastics (Celanese)
OmniLon™ PA612 GR40 is a polyamide 6-12 (PA6/12) grade reinforced with 40% glass fibers. Possesses high durability, good strength, surface appearance and processability. Exhibits high chemical... view more
Features
  • Chemical resistance Good
  • Durable
  • Filled Glass Fiber
  • Processability Good
  • ...
Pier One Polymers
MAXAMID™ PA612-BK10, manufactured by Pier One Polymers, is a polyamide 6/12 (PA 6/12) grade. It is UV stabilized and is available in natural and custom colors. It contains internal & external... view more
Features
  • Colorability Good
  • Lubricated
  • UV Stabilized
Pier One Polymers
MAXAMID™ PA612G33-BK, manufactured by Pier One Polymers, is a polyamide 6/12 (PA 6/12) grade reinforced with 33% glass fiber. It is UV stabilized and is available in only black color. It contains... view more
Features
  • Filled Glass Fiber
  • Lubricated
  • UV Stabilized
Pier One Polymers
MAXAMID™ PA612G43-BK10, manufactured by Pier One Polymers, is a polyamide 6/12 (PA 6/12) grade reinforced with 43% glass fiber. It is available in only black color. It contains internal & external... view more
Features
  • Filled Glass Fiber
  • Lubricated
Bergamid™ NL-20GF/000 BK002 is a black colored, glass fiber reinforced PA (polyamide) 6-12 compound. It exhibits excellent thermal properties, very good cost/ performance ratio, excellent balance of... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Electrical Properties Good
  • Filled Glass Fiber
  • ...
Bergamid™ NL-35GF/000 BLACK is a black colored, 35 wt. % glass fiber reinforced PA (polyamide) 6-12 compound. It exhibits excellent thermal properties, very good cost/ performance ratio, excellent... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Electrical Properties Good
  • Filled Glass Fiber
  • ...
Edgetek™ NL-20GF/000 Black by PolyOne is a semi-crystalline, 20% glass fiber filled polyamide 6-12 (PA 6-12) grade. It exhibits very good chemical resistance, good stability and low to none water... view more
Features
  • Chemical resistance Good
  • Crystalline Semi
  • Filled Glass Fiber
  • Stability Good
  • ...
LubriOne™ NL-30GF/13T-2S BK004 is a self-lubricating and wear-resistant, black colored polyamide 612 grade reinforced with PTFE+silicone lubricant and 30% glass fiber. Offers low coefficient of... view more
Features
  • Filled Glass Fiber
  • Flexibility Good
  • Friction Low
  • Lubricated
  • ...
Nymax™ GF 1880 33HS NAT is a natural colored, heat stabilized polyamide 6-12 resin reinforced with 33% glass fiber. Exhibits good stiffness, durability, impact resistance, chemical resistance, fire... view more
Features
  • Chemical resistance Good
  • Durable
  • Filled Glass Fiber
  • Heat stabilized
  • ...
RTP Company
RTP 200 D is an unreinforced (precolor) nylon (polyamide) 6/12 grade. Exhibits reduced crystallinity, low water absorption, strength, heat resistance, chemical resistance (excellent for weak alkalis... view more
Features
  • Acid Resistant
  • Alkali Resistant
  • Chemical resistance Good
  • Dimensional stability Good
  • ...
RTP Company
RTP 200 D AR 10 is a polyamide 6-12 (PA-6-12) grade by RTP Company, reinforced with 10% aramid filler. RTP 200 D AR 10 is suitable for processing by injection molding. Possible applications include... view more
Features
  • Fatigue Resistant
  • Filled
RTP 200 D AR 10 TFE 10 is a nylon (polyamide) 6/12 grade filled with 10% PTFE and reinforced with 10% aramid fiber. Exhibits reduced crystallinity, low water absorption, strength, heat resistance... view more
Features
  • Acid Resistant
  • Alkali Resistant
  • Chemical resistance Good
  • Dimensional stability Good
  • ...
RTP 200 D AR 10 TFE 15 is a polyamide 6-12 (PA-6-12) grade by RTP Company, reinforced with 15% PTFE, 10% aramid filler and lubricants. RTP 200 D AR 10 TFE 15 is suitable for processing by injection... view more
Features
  • Fatigue Resistant
  • Lubricated
  • Filled
RTP 200 D AR 10 TFE 5 is a nylon (polyamide) 6/12 grade filled with 5% lubricated PTFE and reinforced with 10% aramid fiber. Exhibits reduced crystallinity, low water absorption, strength, heat... view more
Features
  • Acid Resistant
  • Alkali Resistant
  • Chemical resistance Good
  • Dimensional stability Good
  • ...
BASF 3D Printing
Back to Top