OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
252 products match your search
Product Name
Supplier
Description
SLOVAMID® 6 BT is a polyamide 6 (PA6) grade. Exhibits excellent manufacturing properties. Suitable for processing by injection molding. Recommended for engineering, electrical and consumer-goods... view more
SLOVAMID® 6 BT HV TLS by Plastcom is a heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding and extrusion methods. SLOVAMID® 6 BT HV TLS is recommended for... view more
Features
  • Heat stabilized
  • UV Stabilized
SLOVAMID® 6 BT LS by Plastcom is an UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 BT LS is recommended for sports equipment and electrical and... view more
Features
  • UV Stabilized
SLOVAMID® 6 BT TLS by Plastcom is a heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 BT TLS is recommended for sports equipment and... view more
Features
  • Heat stabilized
  • UV Stabilized
SLOVAMID®6 BT TS is an optically brightened, heat stabilized polyamide 6 (PA6) grade. Exhibits high toughness, high modulus of elasticity in tension in comparison with basic types and surface... view more
Features
  • Elasticity High
  • Heat stabilized
  • Surface Finish Good
  • Toughness Good
SLOVAMID®6 6 C 30 LS is a UV stabilized polyamide 6 (PA6) grade reinforced with 30% calcium carbonate. Exhibits increased strength, high rigidity and thermal application up to 100°C. Possesses... view more
Features
  • Filled
  • Impact resistance High
  • Rigidity High
  • Shrinkage Low
  • ...
SLOVAMID® 6 CF 20 is a polyamide 6 (PA6) grade reinforced with 20% carbon fibers. Exhibits high strength and toughness also at low temperature. Suitable for processing by injection molding... view more
Features
  • Filled Carbon fiber
  • Strength Good
  • Toughness Low Temperature
SLOVAMID® 6 FRB 4 is a halogen-free, flame retardant polyamide 6 (PA6) grade. Exhibits easy flowability, good resistance against injection failure and good fluidity. Suitable for processing by... view more
Features
  • Flame retarded
  • Flow Good
  • Halogen Free
SLOVAMID® 6 FRB 4 LS by Plastcom is a flame retardant, UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 FRB 4 LS is recommended for electrical and... view more
Features
  • Flame retarded
  • UV Stabilized
SLOVAMID® 6 FRC 1 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 FRC 1 is recommended for electrical and electronical... view more
Features
  • Flame retarded
SLOVAMID® 6 FRC 2 is a halogen free, flame retardant polyamide 6 (PA6) grade. Suitable for processing by injection molding. Excellent fluidity of the material predetermines it for the manufacturing... view more
Features
  • Flame retarded
  • Halogen Free
SLOVAMID® 6 FRC 2 /2M by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 FRC 2 /2M is recommended for electrical and electronical... view more
Features
  • Flame retarded
SLOVAMID® 6 FRC 2 218/1M by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 FRC 2 218/1M is recommended for electrical and... view more
Features
  • Flame retarded
SLOVAMID® 6 FRC 2 LI is an impact modified, flame retarded polyamide 6 (PA6) grade with halogen-free flame retardant. Excellent fluidity of the material predetermines it for the manufacturing of... view more
Features
  • Flame retarded
  • Impact modified
SLOVAMID® 6 FRC 2 LS is an UV stabilized, halogen-free, flame retartdant polyamide 6 (PA6) grade. Allows long-term external use because of stabilization with the light stabilizers on the HALS basis... view more
Features
  • Flame retarded Halogen free
  • Light Stabilized
  • UV Stabilized
SLOVAMID® 6 FRC 2 TS by Plastcom is a flame retardant, heat stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 FRC 2 TS is recommended for electrical... view more
Features
  • Flame retarded
  • Heat stabilized
SLOVAMID® 6 FRC 3 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 FRC 3 is recommended for electrical and electronical... view more
Features
  • Flame retarded
SLOVAMID® 6 FRM 1 is a halogen free, flame retardant polyamide 6 (PA6) grade. Suitable for processing by injection molding. Excellent fluidity of the material predetermines it for the manufacturing... view more
Features
  • Flame retarded
  • Halogen Free
SLOVAMID® 6 FRM 2 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 FRM 2 is recommended for electrical and electronical... view more
Features
  • Flame retarded
SLOVAMID® 6 FRM1X3 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 FRM1X3 is recommended for electrical and electronical... view more
Features
  • Flame retarded
SLOVAMID® 6 G 10is a polyamide 6 (PA6) grade reinforced with 10% graphite. Exhibits lowered molding surface abrasion. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Abrasion resistance Good
  • Filled
SLOVAMID® 6 G 5 is a polyamide 6 (PA6) grade reinforced with 5% graphite. Exhibits lowered molding surface abrasion. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Abrasion resistance Good
  • Filled
SLOVAMID® 6 GB 20 is a polyamide 6 (PA6) grade reinforced with 20% glass beads. Exhibits high surface brightness, good moldability and good anisotropy of molding. Suitable for processing by... view more
Features
  • Appearance Pleasing Surface
  • Filled
  • Moldability Good
SLOVAMID® 6 GB 30 is a polyamide 6 (PA6) grade reinforced with 30% glass beads. Exhibits high surface brightness, good moldability and nearly ideal anisotropy of shrinkage in the vertical and in the... view more
Features
  • Appearance Pleasing Surface
  • Filled
  • Moldability Good
SLOVAMID® 6 GB 30 HI by Plastcom is an impact modified polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass bead. Designed for injection molding method. SLOVAMID® 6 GB 30 HI is recommended... view more
Features
  • Filled
  • Impact modified
SLOVAMID® 6 GB 30 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass bead. Designed for injection molding method. SLOVAMID® 6 GB 30 TS is complies with... view more
Features
  • Filled
  • Heat stabilized
SLOVAMID® 6 GF 10 is a polyamide 6 (PA6) grade reinforced with 10% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of grips for electro tools, hobby tools... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GF 10 FRA 5 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 10% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 10 FRA 5 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 10 FRC 2 is a flame retardant polyamide 6 (PA6) grade reinforced with 10% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of grips for... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 10 FRG 5 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 10% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 10 FRG 5 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 10 GB 20 is a polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20% glass beads. Suitable for processing by injection molding. Recommended for manufacturing of grips for... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GF 10 GB 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20 % glass beads. Exhibits good moldability and strength. Suitable for processing by... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Moldability Good
  • Strength Good
SLOVAMID® 6 GF 10 T 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20% talc. Exhibits good anisotropy of the manufacturing shrinkage and low warpage after... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Shrinkage Low
SLOVAMID® 6 GF 10 T 20 TS 002 by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% talc and glass fiber and offering low warpage. Designed for injection molding... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Warpage Low
SLOVAMID® 6 GF 10 T 20 TS 002/AKT by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% talc and glass fiber and offering low warpage. Designed for injection... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Warpage Low
SLOVAMID® 6 GF 10 T 20 TS 031/4M by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% talc and glass fiber and offering low warpage. Designed for injection... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Warpage Low
SLOVAMID® 6 GF 10 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 10% glass fiber. Designed for injection molding method. SLO SLOVAMID® 6 GF 10 TS is... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 6 GF 15 is a polyamide 6 (PA6) grade reinforced with 15% glass fibers. Exhibits good impact resistance and impact strength. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Impact Resistance Good
  • Strength Good
SLOVAMID® 6 GF 15 FRA 5 is a halogen-free, flame retardant polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for electrical... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
SLOVAMID® 6 GF 15 FRG 2 LW by Plastcom is a flame retardant, laser markable polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 15% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Laser Markable
SLOVAMID® 6 GF 15 HI is a polyamide 6 (PA6) grade reinforced with 15% glass fibers. Exhibits improved impact strength. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Impact Resistance Good
SLOVAMID® 6 GF 15 HI TS is a heat stabilized, impact modified polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Impact modified
SLOVAMID® 6 GF 15 LS by Plastcom is an UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 15% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 15 LS is recommended... view more
Features
  • Filled Glass Fiber
  • UV Stabilized
SLOVAMID® 6 GF 15 MI/2 by Plastcom is an impact modified polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 15% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 15 MI/2 is... view more
Features
  • Filled Glass Fiber
  • Impact modified
SLOVAMID® 6 GF 15 T 25 by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 40% talc and glass fiber and offering low warpage. Designed for injection molding method. SLOVAMID® 6 GF... view more
Features
  • Filled Glass Fiber
  • Warpage Low
SLOVAMID® 6 GF 15 T 25 LTS by Plastcom is a heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 40% talc and glass fiber. Designed for injection molding method. SLOVAMID® 6... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • UV Stabilized
SLOVAMID® 6 GF 15 T 25 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 40% talc and glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 15 T 25... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 6 GF 15 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 15% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 15 TS is recommended... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 6 GF 20 is a polyamide 6 (PA6) grade reinforced with 20% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of grips for electro tools, hobby tools... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GF 20 FRA 5 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 20% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 20 FRA 5 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 20 FRG 3 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 20% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 20 FRG 3 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 20 GB 10 is a heat stabilized polyamide 6 (PA6) grade reinforced with 20% glass fibers and 10% glass beads. Exhibits good impact strength, good moldability and strength. Suitable for... view more
Features
  • Filled Glass Fiber
  • Impact Resistance Good
  • Moldability Good
  • Strength Good
SLOVAMID® 6 GF 20 HI by Plastcom is an impact modified polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 20% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 20 HI is recommended... view more
Features
  • Filled Glass Fiber
  • Impact modified
SLOVAMID® 6 GF 20 LS by Plastcom is an UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 20% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 20 LS complies with UL... view more
Features
  • Filled Glass Fiber
  • UV Stabilized
SLOVAMID® 6 GF 20 T 10 FRG 5 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% talc and glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 20 T... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 20% glass fibers. Suitable for processing by injection molding. Recommended for manufacture of grips for electro... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 6 GF 25 is a polyamide 6 (PA6) grade reinforced with 25% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Strength Good
  • Toughness Good
SLOVAMID® 6 GF 25 E LS by Plastcom is an UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% glass fiber. Designed for extrusion method. SLOVAMID® 6 GF 25 E LS complies with UL 94... view more
Applications
Features
  • Filled Glass Fiber
  • UV Stabilized
SLOVAMID® 6 GF 25 FRA 5 is a halogen-free, flame retardant polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for electrical... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
SLOVAMID® 6 GF 25 FRA 5 LS by Plastcom is an UV stabilized, flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • UV Stabilized
SLOVAMID® 6 GF 25 FRC 3 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 25 FRC 3 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 25 FRC 4 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 25 FRC 4 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 25 FRG 5 is a halogen-free, flame retardant polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for electrical... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
SLOVAMID® 6 GF 25 LTS by Plastcom is a heat- , light- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 25... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Light Stabilized
  • UV Stabilized
SLOVAMID® 6 GF 25 T 15 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with glass and mineral fibers. Exhibits improved anisotrophy of shinkage. Suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Filled Mineral
SLOVAMID® 6 GF 25 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 25 TS is recommended... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 6 GF 30 is a polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Strength High
  • Toughness Ultra High
SLOVAMID® 6 GF 30 006/1M by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 30 006/1M is recommended for... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GF 30 AS by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber and contains antistatic additive. Designed for injection molding method. SLOVAMID® 6 GF 30... view more
Features
  • Antistatic
  • Filled Glass Fiber
SLOVAMID® 6 GF 30 FRA 3 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 30 FRA 3 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 30 FRA 5 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 30 FRA 5 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 30 FRA 5/1M5 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 30 FRA 5/1M5... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 30 FRG 2 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 30 FRG 2 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 30 FRG 4 LW by Plastcom is a flame retardant, laser markable polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Laser Markable
SLOVAMID® 6 GF 30 FRG 5 is a flame retarded polyamide 6 (PA6) grade with halogen-free flame retardant and reinforced with 30% glass fibers. Suitable for processing by injection molding. Used in... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
SLOVAMID® 6 GF 30 HI is a polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits good moldability and good impact strength. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Impact Resistance Good
  • Moldability Good
SLOVAMID® 6 GF 30 HTS by Plastcom is a heat- and hydrolytically stable polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 30... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolytically Stable
SLOVAMID® 6 GF 30 LS by Plastcom is an UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 30 LS is recommended... view more
Features
  • Filled Glass Fiber
  • UV Stabilized
SLOVAMID® 6 GF 30 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high heat resistance. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Heat Resistance High
  • Heat stabilized
SLOVAMID® 6 GF 30 TS 031 by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 30 TS 031 is... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 6 GF 33 is a polyamide 6 (PA6) grade reinforced with 33% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Strength High
  • Toughness Ultra High
SLOVAMID® 6 GF 35 is a polyamide 6 (PA6) grade reinforced with 35% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Strength High
  • Toughness Ultra High
SLOVAMID® 6 GF 35 FRC 5 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 35% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 35 FRC 5 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 35 LS by Plastcom is an UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 35% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 35 LS is recommended... view more
Features
  • Filled Glass Fiber
  • UV Stabilized
SLOVAMID® 6 GF 35 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 35% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 35 TS is recommended... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 6 GF 40 by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 40% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 40 is recommended for automotive... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GF 40 HI by Plastcom is an impact modified polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 40% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 40 HI is recommended... view more
Features
  • Filled Glass Fiber
  • Impact modified
SLOVAMID® 6 GF 45 is a polyamide 6 (PA6) grade reinforced with 45% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Strength High
  • Toughness Ultra High
SLOVAMID® 6 GF 5 by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 5% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 5 is recommended for automotive... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GF 5 FRA 5 is a halogen-free, flame retarded polyamide 6 (PA6) grade reinforced with 5% glass fiber. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Flame retarded Halogen free
SLOVAMID® 6 GF 5 T 20 FRG 2 by Plastcom is a flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% talc and glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 5 T... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 6 GF 50 by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 50% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 50 is recommended for automotive... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GF 50 /2M by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 50% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 50 /2M is recommended for... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GF 50 LS by Plastcom is a light- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 50% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 50 LS is... view more
Features
  • Filled Glass Fiber
  • Light Stabilized
  • UV Stabilized
SLOVAMID® 6 GF 50 LTS by Plastcom is a heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 50% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 50 LTS is... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • UV Stabilized
SLOVAMID® 6 GF 50 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 50% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 50 TS is recommended... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 6 GF 60 is a polyamide 6 (PA6) grade reinforced with 60% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Strength High
  • Toughness Ultra High
SLOVAMID® 6 GF 60 000/1M by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 60% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 60 000/1M is recommended for... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GF 60 000/3M by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 60% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 60 000/3M is... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 6 GF 65 is a polyamide 6 (PA6) grade reinforced with 65% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Strength High
  • Toughness Ultra High
SLOVAMID® 6 GF 65/2M by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 65% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 65/2M is recommended for automotive... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GF 7 T 13 by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 20% talc and glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 7 T 13 complies with UL 94... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6 GMI is a polyamide 6 (PA6) grade. Exhibits high impact strength. Suitable for processing by injection molding. Recommended for manufacturing of grips of electro tools, hobby tools... view more
Features
  • Impact resistance High
SLOVAMID® 6 HI is a polyamide 6 (PA6) grade. Exhibits high impact strength. Suitable for processing by injection molding. Recommended for manufacturing of ski shoes, sports and safety helmets and... view more
Features
  • Impact resistance High
SLOVAMID® 6 HI -M by Plastcom is an impact modified polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 HI -M is recommended for sports equipment. Complies with UL... view more
Features
  • Impact modified
SLOVAMID® 6 HI HV TS by Plastcom is an impact modified, heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, offering oil resistance. Designed for extrusion blow molding method. SLOVAMID® 6 HI HV TS... view more
Features
  • Heat stabilized
  • Impact modified
  • Oil Resistant
SLOVAMID® 6 HI/1 TLS by Plastcom is an impact modified, heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 HI/1 TLS is recommended for... view more
Features
  • Heat stabilized
  • Impact modified
  • UV Stabilized
SLOVAMID® 6 LI by Plastcom is an impact modified polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 LI is recommended for sports equipment. Complies with UL 94 HB... view more
Features
  • Impact modified
SLOVAMID® 6 LI LS by Plastcom is an impact modified, UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 LI LS is recommended for sports equipment... view more
Features
  • Impact modified
  • UV Stabilized
SLOVAMID® 6 LI/1 by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 LI/1 is recommended for sports equipment. Complies with UL 94 HB Flame... view more
SLOVAMID® 6 LI/1 LS by Plastcom is an impact modified, UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 LI/1 LS is recommended for sports... view more
Features
  • Impact modified
  • UV Stabilized
SLOVAMID® 6 M 40 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 40% mineral fibers. Exhibits high strength, high rigidity and allows thermal application up to 100°C. Possesses... view more
Features
  • Heat stabilized
  • Impact resistance High
  • Filled Mineral
  • Rigidity High
  • ...
SLOVAMID® 6 MI by Plastcom is an impact modified polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 MI is recommended for sports equipment. Complies with UL 94 HB... view more
Features
  • Impact modified
SLOVAMID® 6 MI/2 by Plastcom is an impact modified polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 MI/2 is recommended for sports equipment and automotive... view more
Features
  • Impact modified
SLOVAMID® 6 NG GF 15 HI is an impact modified polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of grips for... view more
Features
  • Filled Glass Fiber
  • Impact modified
SLOVAMID® 6 NG GF 20 is a polyamide 6 (PA6) grade reinforced with 20% glass fibers. Exhibits high impact resistance. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Impact resistance High
  • UV Stabilized
SLOVAMID® 6 NG GF 20 HLS is a UV stabilized polyamide 6 (PA6) grade reinforced with 20% glass fibers. Exhibits good hydrolysis resistance and surface finish. Suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Hydrolysis Resistant
  • Surface Finish Good
  • UV Stabilized
SLOVAMID® 6 NG GF 30 is a polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high impact strength. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Impact resistance High
SLOVAMID® 6 NG GF 30 LS is a UV stabilized polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high impact strength. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Impact resistance High
  • UV Stabilized
SLOVAMID® 6 NG GF 30 TS is an heat stabilized polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high impact strength. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Impact resistance High
  • UV Stabilized
SLOVAMID® 6 NG GF 45 is a polyamide 6 (PA6) grade reinforced with 45% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for manufacturing... view more
Features
  • Filled Glass Fiber
  • Strength High
  • Toughness Ultra High
SLOVAMID® 6 NG GF 45 SGF is a UV stabilized polyamide 6 (PA6) grade reinforced with 45% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended... view more
Features
  • Filled Glass Fiber
  • Strength High
  • UV Stabilized
SLOVAMID® 6 NG1 GF 20 HLS is a UV stabilized polyamide 6 (PA6) grade reinforced with 20% glass fibers. Exhibits good surface finish, hydrolysis resistance and scratch resistance. Suitable for... view more
Features
  • Filled Glass Fiber
  • Hydrolysis Resistant
  • Scratch Resistance Good
  • Surface Finish Good
  • ...
SLOVAMID® 6 NG1 GF 30 HLS by Plastcom is a UV- and hydrolytically stable polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 NG1... view more
Features
  • Filled Glass Fiber
  • Hydrolytically Stable
  • UV Stabilized
SLOVAMID® 6 OB is a polyamide 6 (PA6) grade. Exhibits fast cycles and high surface brightness. Possesses increased toughness and tensile modulus in comparison to basic type. Shows isotropy of... view more
Features
  • Cycle Time Short
  • Surface Finish Good
  • Tensile Strength High
  • Toughness Ultra High
SLOVAMID® 6 SGF 30 is a polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for manufacture of... view more
Features
  • Filled Glass Fiber
  • Tensile Strength High
  • Toughness Ultra High
SLOVAMID® 6 T 10 by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 10% talc. Designed for injection molding method. SLOVAMID® 6 T 10 complies with UL 94 HB Flame Rating... view more
Features
  • Filled
SLOVAMID® 6 T 15 by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 15% talc. Designed for injection molding method. SLOVAMID® 6 T 15 complies with UL 94 HB Flame Rating... view more
Features
  • Filled
SLOVAMID® 6 T 20 by Plastcom is a polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 20% talc. Designed for injection molding method. SLOVAMID® 6 T 20 complies with UL 94 HB Flame Rating... view more
Features
  • Filled
SLOVAMID® 6 T 30 is a polyamide 6 (PA6) grade reinforced with 30% talc. Exhibits decreased shrinkage against the BT types. Suitable for processing by injection molding. Recommended for manufacturing... view more
Features
  • Filled
  • Shrinkage Low
SLOVAMID® 6 T 30 FRC 4 TS by Plastcom is a flame retardant, heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% talc. Designed for injection molding method. SLOVAMID® 6 T 30 FRC... view more
Features
  • Filled
  • Flame retarded
  • Heat stabilized
SLOVAMID® 6 T 30 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% talc. Designed for injection molding method. SLOVAMID® 6 T 30 TS complies with UL 94 HB... view more
Features
  • Filled
  • Heat stabilized
SLOVAMID® 6/66 C GF 30 HI is a polyamide 6/66 (PA 6/66) grade. Exhibits high impact strength and high toughness at low temperatures. Suitable for processing by injection molding. Used in ski shoes... view more
Features
  • Impact resistance High
  • Toughness Low Temperature
SLOVAMID® 6/66 CF 30 is a polyamide 6/66 (PA 6/66) grade reinforced with 30% carbon fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Used in automotive... view more
Features
  • Filled Carbon fiber
  • Strength High
  • Toughness Ultra High
SLOVAMID® 6/66 FRC 3 TS is a flame retarded, heat stabilized polyamide 6/66 (PA 6/66) grade with non-halogen flame retardant. Suitable for processing by injection molding. Used in electrical... view more
Features
  • Flame retarded
  • Halogen Free
  • Heat stabilized
SLOVAMID® 6/66 GF 15 GB 15 by Plastcom is a blend of polyamide 6 (PA 6 / Nylon 6) and polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 30% glass fiber and bead. Designed for injection molding... view more
Features
  • Filled Glass Fiber
SLOVAMID® 6/66 GF 30 FRG 5 TS is a flame retarded, heat stabilized polyamide 6/66 (PA6/66) grade reinforced with 30% glass fibers. The grade is with non-halogen flame retardant. Exhibits high flow... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • Halogen Free
  • ...
SLOVAMID® 6/66 GF 30 TS is a heat stabilized polyamide 6 + polyamide 66 (PA6+PA66) grade reinforced with 30% glass fibers. Suitable for processing by injection molding. Used in automotive... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 6/66 GF 50 is a polyamide 6/66 (PA6/66) grade reinforced with 50% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Strength High
  • Toughness Ultra High
SLOVAMID® 6/66C T 20 HI is a polyamide 6 (PA6) grade reinforced with 20% mineral fibers. Exhibits high impact strength. Suitable for processing by injection molding. Recommended for manufacture of... view more
Features
  • Impact resistance High
  • Filled Mineral
SLOVAMID® 6/6T GF 35 TS by Plastcom is a heat stabilized polyamide 6-6 (PA 6-6 / Nylon 6-6) grade, reinforced with 35% glass fiber. Designed for injection molding method. SLOVAMID® 6/6T GF 35 TS is... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66 BT is a polyamide 66 (PA66) grade. Exhibits excellent manufacturing properties. Suitable for processing by injection molding. Recommended for manufacturing of electric tools, gear... view more
SLOVAMID® 66 BT LS by Plastcom is an UV stabilized polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 BT LS is recommended for automotive, electrical and... view more
Features
  • UV Stabilized
SLOVAMID® 66 BT TS by Plastcom is a heat stabilized polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 BT TS is recommended for automotive, electrical and... view more
Features
  • Heat stabilized
SLOVAMID® 66 BT/20 is a polyamide 66 (PA66) grade. Exhibits excellent manufacturing properties. Suitable for processing by injection molding. Recommended for manufacture of electric tools, gear... view more
SLOVAMID® 66 C 15 LS is a UV stabilized polyamide 66 (PA66) grade reinforced with 15% mineral fiber. Exhibits increased strength, rigidity and thermal application up to 100°C. Suitable for... view more
Features
  • Filled Mineral
  • Rigidity High
  • Strength High
  • UV Stabilized
SLOVAMID® 66 C 15 MI is a impact modified polyamide 66 (PA66) grade reinforced with 15% mineral fibers. Suitable for processing by injection molding. Recommended for manufacturing of grips of... view more
Features
  • Impact modified
  • Filled Mineral
SLOVAMID® 66 CF 20 is a polyamide 66 (PA66) grade reinforced with 20% carbon fibers. Exhibits high strength and toughness also at low temperature. Suitable for processing by injection molding... view more
Features
  • Filled Carbon fiber
  • Strength High
  • Toughness Low Temperature
SLOVAMID® 66 CF 30 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 30% carbon fibers. Exhibits high strength and toughness also at low temperature. Suitable for processing by... view more
Features
  • Filled Carbon fiber
  • Strength High
  • Toughness Low Temperature
SLOVAMID® 66 CF 40 is a polyamide 66 (PA66) grade reinforced with 40% carbon fibers. Exhibits high strength and toughness also at low temperature. Suitable for processing by injection molding. Used... view more
Features
  • Filled Carbon fiber
  • Strength High
  • Toughness Low Temperature
SLOVAMID® 66 FRC 1 by Plastcom is a flame retardant polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 FRC 1 is recommended for automotive, electrical and... view more
Features
  • Flame retarded
SLOVAMID® 66 FRC 2 is a flame retarded polyamide 66 (PA66) grade. Exhibits excellent manufacturing properties. Suitable for processing by injection molding. Recommended for manufacturing of electric... view more
Features
  • Flame retarded
  • Mechanical Properties Excellent
SLOVAMID® 66 FRC 3 is a flame retarded polyamide 66 (PA66) grade. Possesses good brightness. Suitable for processing by injection molding. Recommended for manufacturing of electric tools, gear... view more
Features
  • Flame retarded
  • Mechanical Properties Excellent
SLOVAMID® 66 FRC 3 TS is a flame retarded, heat stabilized polyamide 66 (PA66) grade. Possesses good brightness. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Flame retarded
  • Heat stabilized
  • Mechanical Properties Excellent
SLOVAMID® 66 FRX3 7 TS is a flame retarded, heat stabilised polyamide 66 (PA66) grade with non-halogen flame retardant. Suitable for processing by injection molding. Used in electrical industry for... view more
Features
  • Flame retarded
  • Halogen Free
  • Heat stabilized
SLOVAMID® 66 GB 20 HI is an impact modified polyamide 66 (PA66) grade reinforced with 20% glass beads. Exhibits high strength and toughness also at low temperature. Suitable for processing by... view more
Features
  • Filled
  • Impact modified
  • Strength High
  • Toughness Low Temperature
SLOVAMID® 66 GB 20 LS is a UV stabilized polyamide 66 (PA66) grade reinforced with 20% glass beads. Exhibits high strength and high impact strength. Suitable for processing by injection molding... view more
Features
  • Filled
  • Impact resistance High
  • Strength High
  • UV Stabilized
SLOVAMID® 66 GB 30 is a polyamide 66 (PA66) grade reinforced with 30% glass beads. Suitable for processing by injection molding. Used in the automotive, engineering and electrical industry... view more
Features
  • Filled
SLOVAMID® 66 GB 30 GF 20 is a polyamide 66 (PA66) grade reinforced with 30% glass beads and 20% glass fibers. Exhibits improved anisotropy of shrinkage, high surface brightness and low warpage... view more
Features
  • Filled Glass Fiber
  • Shrinkage Low
  • Surface finish excellent
  • Warpage Low
SLOVAMID® 66 GB 30 LS by Plastcom is an UV stabilized polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 30% glass bead. Designed for injection molding method. SLOVAMID® 66 GB 30 LS is... view more
Features
  • Filled
  • UV Stabilized
SLOVAMID® 66 GB 30 TS by Plastcom is a heat stabilized polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 30% glass bead. Designed for injection molding method. SLOVAMID® 66 GB 30 TS is... view more
Features
  • Filled
  • Heat stabilized
SLOVAMID® 66 GB 40 is a polyamide 66 (PA66) grade reinforced with 40% glass beads. Suitable for processing by injection molding. Used in the automotive, engineering and electrical industry... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 10 is a polyamide 66 (PA66) grade reinforced with 10% glass fibers. Suitable for processing by injection molding. Recommended for manufacture of hobby tools, covers of electro tools... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 10 FRA 3 is a flame retarded, polyamide 66 (PA66) grade with halogen-free, flame retardant and reinforced with 10% glass fibers. Suitable for processing by injection molding. Used in... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
SLOVAMID® 66 GF 10 GB 20 is a polyamide 66 (PA66) grade reinforced with 10% glass fibers and 20% glass beads. Exhibits improved anisotropy of shrinkage, high surface brightness and low warpage... view more
Features
  • Filled Glass Fiber
  • Shrinkage Low
  • Surface finish excellent
  • Warpage Low
SLOVAMID® 66 GF 10 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 10% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby tools... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66 GF 13 TS by Plastcom is a heat stabilized polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 13% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 13 TS is... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66 GF 14 HI TS by Plastcom is an impact modified, heat stabilized polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 14% glass fiber. Designed for injection molding method. SLOVAMID®... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Impact modified
SLOVAMID® 66 GF 15 is a polyamide 66 (PA66) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby tools, covers of electro... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 15 002 is a polyamide 66 (PA66) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby tools, covers of electro... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 15 002/1M by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 15% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 15 002/1M is recommended for... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 15 GB 25 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 15% glass fibers and 25% glass beads. Exhibits anisotropy of shrinkage, high surface brightness and low... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Surface Finish Good
  • Warpage Low
SLOVAMID® 66 GF 15 HI is an impact modified polyamide 66 (PA66) grade reinforced with 15% glass fibers. Exhibits high strength and toughness also at low temperature. Suitable for processing by... view more
Features
  • Filled Glass Fiber
  • Impact modified
  • Strength High
  • Toughness Low Temperature
SLOVAMID® 66 GF 15 T 25 is a polyamide 66 (PA66) grade reinforced with 15% glass fibers and talc. Suitable for processing by injection molding. Recommended for manufacturing of hobby tools, covers... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 15 T 6 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 15% glass fibers and 6% mineral fibers. Exhibits high strength and toughness also at low temperature... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Filled Mineral
  • Strength High
  • ...
SLOVAMID® 66 GF 15 TS by Plastcom is a heat stabilized polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 15% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 15 TS is... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66 GF 17 T 21 is a polyamide 66 (PA66) grade reinforced with 17% glass fibers and 21% of mineral fibers. Suitable for processing by injection molding. Recommended for manufacturing of... view more
Features
  • Filled Glass Fiber
  • Filled Mineral
SLOVAMID® 66 GF 20 by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 20% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 20 is recommended for automotive... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 20 GB 10 is a polyamide 66 (PA66) grade reinforced with 20% glass fibers and 10% of glass beads. Exhibits high surface brightness and low warpage. Suitable for processing by... view more
Features
  • Filled Glass Fiber
  • Surface Finish Good
  • Warpage Low
SLOVAMID® 66 GF 20 GB 10 HI is an impact modified polyamide 66 (PA66) grade reinforced with 20% glass fibers and 10% of glass beads. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Impact modified
  • Toughness Low Temperature
SLOVAMID® 66 GF 20 HTS by Plastcom is a heat- and hydrolytically stable polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 20% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolytically Stable
SLOVAMID® 66 GF 20 TS by Plastcom is a heat stabilized polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 20% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 20 TS is... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66 GF 20/1M by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 20% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 20/1M is recommended for... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 20/2M by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 20% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 20/2M is recommended for... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 25 by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 25 is recommended for automotive... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 25 E 002 by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 25% glass fiber and offers thermal stability. Designed for injection molding and profile extrusion... view more
Features
  • Filled Glass Fiber
  • Thermal Stability Good
SLOVAMID® 66 GF 25 E 002/1M by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 25% glass fiber and offers thermal stability. Designed for injection molding and profile extrusion... view more
Features
  • Filled Glass Fiber
  • Thermal Stability Good
SLOVAMID® 66 GF 25 E/1M by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 25% glass fiber and offers thermal stability. Designed for injection molding and profile extrusion... view more
Features
  • Filled Glass Fiber
  • Thermal Stability Good
SLOVAMID® 66 GF 25 FRA 5 by Plastcom is a flame retardant polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 25 FRA 5 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 66 GF 25 FRA 5 TS by Plastcom is a flame retardant, heat stabilized polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID®... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Heat stabilized
SLOVAMID® 66 GF 25 FRG 5 is flame retarded with non-halogen flame retardant polyamide 66 (PA66) grade reinforced with 25% glass fibers. Suitable for processing by injection molding. Used in... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
SLOVAMID® 66 GF 25 FRG 5 TS is flame retarded with non-halogen flame retardant polyamide 66 (PA66) grade reinforced with 25% glass fibers. Suitable for processing by injection molding. Used in... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
SLOVAMID® 66 GF 25 FRI 2 is flame retarded with non-halogen flame retardant polyamide 66 (PA66) grade reinforced with 25% glass fibers. Suitable for processing by injection molding. Used in... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
SLOVAMID® 66 GF 25 FRI 3 is flame retarded with non-halogen flame retardant polyamide 66 (PA66) grade reinforced with 25% glass fibers. Suitable for processing by injection molding. Used in... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
SLOVAMID® 66 GF 25 FRI 3 TS is a heat stabilized, flame retarded with non-halogen flame retardant polyamide 66 (PA66) grade reinforced with 25% glass fibers. Suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Heat stabilized
  • Halogen Free
SLOVAMID® 66 GF 25 HTS is a heat stabilized, hydrolysis resistant polyamide 66 (PA66) grade reinforced with 25% glass fibers. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
SLOVAMID® 66 GF 25 HTS 000/1M is a heat stabilized, hydrolysis resistant polyamide 66 (PA66) grade reinforced with 25% glass fibers. Exhibits high resistance to oil, hot oil and fats. Suitable for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
  • Oil Resistant
SLOVAMID® 66 GF 25 TS by Plastcom is a heat stabilized polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 25 TS is... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66 GF 30 is a polyamide 66 (PA66) grade reinforced with 30% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of holders of electric hand tools... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 30 FRA 3 by Plastcom is a flame retardant polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 30 FRA 3 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 66 GF 30 FRA 5 is a flame retarded with halogenated flame retardant polyamide 66 (PA66) grade reinforced with 30% glass fibers. Suitable for processing by injection molding. Used in... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogenated
SLOVAMID® 66 GF 30 HI is an impact modified polyamide 66 (PA66) grade reinforced with 30% glass fibers. Exhibits high strength. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Impact modified
  • Strength High
SLOVAMID® 66 GF 30 HTS is a heat stabilized, hydrolysis resistant polyamide 66 (PA66) grade reinforced with 30% glass fibers. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
SLOVAMID® 66 GF 30 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 30% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of intake pipes... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66 GF 33 by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 33% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 33 is recommended for automotive... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 33 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 33% glass fibers. Exhibits high strength and impact strength. Suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Impact resistance High
  • Strength High
SLOVAMID® 66 GF 35 by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 35% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 35 is recommended for automotive... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 35 FRA 5 is a flame retarded with halogenated flame retardant polyamide 66 (PA66) grade reinforced with 35% glass fibers. Suitable for processing by injection molding. Used in... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogenated
SLOVAMID® 66 GF 35 FRG 5 is a heat stabilized, flame retarded with non-halogenated flame retardant polyamide 66 (PA66) grade reinforced with 35% glass fibers. Suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Heat stabilized
  • Halogen Free
SLOVAMID® 66 GF 35 FRI 3 by Plastcom is a flame retardant polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 35% glass fiber. Designed for injection molding method. SLOVAMID® 66 GF 35 FRI 3 is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
SLOVAMID® 66 GF 35 FRI 3 TS is a heat stabilized, flame retarded with non-halogen flame retardant polyamide 66 (PA66) grade reinforced with 35% glass fibers. Suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Heat stabilized
  • Halogen Free
SLOVAMID® 66 GF 35 HTS is a heat stabilized and hydrolysis resistant polyamide 66 (PA66) grade reinforced with 35% glass fibers. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
SLOVAMID® 66 GF 35 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 35% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of intake pipes... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66 GF 40 is a polyamide 66 (PA66) grade reinforced with 40% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby tools, covers of electro... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 40 E/1M by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 40% glass fiber. Designed for injection molding and profile extrusion methods. SLOVAMID® 66 GF 40 E/1M... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 40 E/2M by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 40% glass fiber. Designed for injection molding and profile extrusion methods. SLOVAMID® 66 GF 40 E/2M... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 40 E/3M by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 40% glass fiber. Designed for injection molding and profile extrusion methods. SLOVAMID® 66 GF 40 E/3M... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 40 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 40% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of holders of... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66 GF 43 is a polyamide 66 (PA66) grade reinforced with 43% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby tools, covers of electro... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 45 is a polyamide 66 (PA66) grade reinforced with 45% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby tools, covers of electro... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 45 HTS is a heat stabilised, hydrolysis resistant polyamide 66 (PA66) grade reinforced with 45% glass fibers. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
SLOVAMID® 66 GF 50 is a polyamide 66 (PA66) grade reinforced with 50% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby tools, covers of electro... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66 GF 50 HTS is a heat stabilized, hydrolysis resistant polyamide 66 (PA66) grade reinforced with 50% glass fibers. Suitable for processing by injection molding. Recommended for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
SLOVAMID® 66 GF 50 LS is a UV and light stabilized polyamide 66 (PA66) grade reinforced with 50% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby... view more
Features
  • Filled Glass Fiber
  • Light Stabilized
  • UV Stabilized
SLOVAMID® 66 GF 50 LS/1 is a UV and light stabilized polyamide 66 (PA66) grade reinforced with 50% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby... view more
Features
  • Filled Glass Fiber
  • Light Stabilized
  • UV Stabilized
SLOVAMID® 66 GF 50 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 50% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby tools... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66 HI is polyamide 66 (PA66) grade modified with thermoplastic elastomer. Exhibits high impact strength, high toughness at low temperatures and withstands high dynamic stress up to -40°C... view more
Features
  • Filled Glass Fiber
  • Impact resistance High
  • Toughness Low Temperature
SLOVAMID® 66 HI/1 by Plastcom is an impact modified polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 HI/1 is recommended for automotive, building... view more
Features
  • Impact modified
SLOVAMID® 66 HI/1 TS by Plastcom is an impact modified, heat stabilized polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 HI/1 TS is recommended for sports... view more
Features
  • Heat stabilized
  • Impact modified
SLOVAMID® 66 LI by Plastcom is an impact modified polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 LI is recommended for sports equipment. Complies with UL... view more
Features
  • Impact modified
SLOVAMID® 66 LI TS by Plastcom is an impact modified, heat stabilized polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 LI TS is recommended for sports... view more
Features
  • Heat stabilized
  • Impact modified
SLOVAMID® 66 LI/1M by Plastcom is an impact modified polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method... view more
Features
  • Impact modified
SLOVAMID® 66 MI by Plastcom is an impact modified polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 MI is recommended for sports equipment. Complies with UL... view more
Features
  • Impact modified
SLOVAMID® 66 MI LS by Plastcom is an impact modified, UV stabilized polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 MI LS is recommended for sports... view more
Features
  • Impact modified
  • UV Stabilized
SLOVAMID® 66 OB by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 OB is recommended electrical and electronical applications. Complies with... view more
SLOVAMID® 66 SHI TS is a heat stabilized, polyamide 66 (PA66) grade modified with thermoplastic elastomer. Exhibits high impact strength, high toughness at low temperatures and withstands high... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Impact resistance High
  • Toughness Low Temperature
SLOVAMID® 66 SLS by Plastcom is a polyamide 66 (PA 66 / Nylon 66) grade, offering thermal stability and low coefficient of friction. Designed for injection molding method. SLOVAMID® 66 SLS is... view more
Features
  • Friction Low
  • Thermal Stability Good
SLOVAMID® 66 T 15 is a polyamide 66 (PA66) grade reinforced with 15% mineral fibers. Exhibits high tensile strength, modulus in tension and excellent dimensional stability. Suitable for processing... view more
Features
  • Dimensional stability Good
  • Filled Mineral
  • Strength High
SLOVAMID® 66 T 15 MI is an impact modified polyamide 66 (PA66) grade reinforced with 15% mineral fibers. Exhibits high tensile strength, modulus in tension and excellent dimensional stability... view more
Features
  • Dimensional stability Good
  • Impact modified
  • Filled Mineral
  • Strength High
SLOVAMID® 66 T 30 is a polyamide 66 (PA66) grade reinforced with 15% mineral filler. Suitable for processing by injection molding. Recommended for manufacturing of holders of electric hand tools... view more
Features
  • Filled Mineral
SLOVAMID® 66 T 30 HI TS is an impact modified and heat stabilized polyamide 66 (PA66) grade reinforced with 30% talc. Exhibits decreased shrinkage and improved impact strenght. Suitable for... view more
Features
  • Filled
  • Impact modified
  • Shrinkage Low
  • Strength High
SLOVAMID® 66 T 35 FRY 7 by Plastcom is a flame retardant polyamide 66 (PA 66 / Nylon 66) grade, reinforced with 35% talc and offers thermal stability. Designed for injection molding method... view more
Features
  • Filled
  • Flame retarded
  • Thermal Stability Good
SLOVAMID® 66 T 36 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 36% mineral filler. Exhibits high tensile strength, modulus in tension and excellent dimensional stability... view more
Features
  • Dimensional stability Good
  • Heat stabilized
  • Filled Mineral
  • Modulus High
  • ...
SLOVAMID® 66 T 40 is a polyamide 66 (PA66) grade reinforced with 40% mineral filler. Suitable for processing by injection molding. Used in holders of electric hand tools, for hobby tools, gears... view more
Features
  • Filled Mineral
SLOVAMID® 66 T 40 FRO 3 is a flame retarded (with halogenated flame retardant) polyamide 66 (PA66) grade reinforced with 40% mineral filler. Exhibits high tensile strength and modulus. Suitable for... view more
Features
  • Flame retarded
  • Filled Mineral
  • Modulus High
  • Tensile Strength High
SLOVAMID® 66 W 30 is a polyamide 66 (PA66) grade reinforced with 30% mineral filler. Exhibits good abrasion resistance and good dimensional stability. Suitable for processing by injection molding... view more
Features
  • Abrasion resistance Good
  • Dimensional stability Good
  • Filled Mineral
SLOVAMID® 66 W 40 is a polyamide 66 (PA66) grade reinforced with 40% mineral filler. Exhibits good abrasion resistance and good dimensional stability. Suitable for processing by injection molding... view more
Features
  • Abrasion resistance Good
  • Dimensional stability Good
  • Filled Mineral
SLOVAMID® 66/6 GF 20 is a polyamide 66/6 (PA66/6) grade reinforced with 20% glass fiber. Suitable for processing by injection molding. Used in hobby tools, covers of electro tools, electromotor... view more
Features
  • Filled Glass Fiber
SLOVAMID® 66/6 GF 30 TS by Plastcom is a blend of polyamide 66 (PA 66 / Nylon 66) and polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber and is heat stabilized. Designed for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
SLOVAMID® 66/6 GF 30 TS LC by Plastcom is a blend of polyamide 66 (PA 66 / Nylon 66) and polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber and offers thermal stability. Designed... view more
Features
  • Filled Glass Fiber
  • Thermal Stability Good
SLOVAMID® 66/6 HI/1 TS by Plastcom is a blend of polyamide 66 (PA 66 / Nylon 66) and polyamide 6 (PA 6 / Nylon 6) grade and is impact modified and heat stabilized. Designed for injection molding... view more
Features
  • Heat stabilized
  • Impact modified
SLOVAMID® 66/6 T 30 TS by Plastcom is a blend of polyamide 66 (PA 66 / Nylon 66) and polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% talc and is heat stabilized. Designed for injection... view more
Features
  • Filled
  • Heat stabilized
Stanyl Polyamide
Channel Alerts

Receive weekly digests on hot topics

Back to Top