OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
4 511 products match your search
Product Name
Supplier
Description
Akulon® CO-KGV4 /A JN.00.86 by DSM is a heat stabilized, halogen-free, phosphorous-free, flame retardant, polyamide 6 grade reinforced with 20% glass fiber. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Heat stabilized
  • ...
Akulon® CO-KGV5 by DSM is a halogen free, flame retardant polyamide 6 grade reinforced with 25% glass fiber. It is phosphorous-free, laser markable and offers chemical resistance. It is a heat... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
  • ...
Akulon® Diablo HDT2500 BK00001 by DSM is a lubricated, heat stabilized, 35% glass fiber reinforced polyamide 66 grade. It is suitable for processing by injection molding. It contains release agent... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Akulon® Diablo HT-HG0 by DSM is a heat stabilized polyamide 66 + polyamide 6 (PA66+PA6) grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. It contains a... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
Akulon® Diablo HT-HG6 by DSM is a heat stabilized polyamide 66 + polyamide 6 (PA66+PA6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It contains a... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
Akulon® F-X9182 by DSM is a low/ medium viscosity polyamide 6 grade. It is suitable for processing by cast film extrusion. It offers good chemical resistance. It can be used for food contact... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Viscosity Medium
Akulon® F-X9190 by DSM is a low/ medium viscosity, polyamide 6 (PA 6) grade. It is suitable for processing by injection molding. It contains a mold release agent and offers chemical resistance... view more
Features
  • Chemical resistance Good
  • Viscosity Medium
Akulon® F-X9215 by DSM is a low/ medium viscosity, polyamide 6 (PA 6) grade. It is heat stabilized and offers chemical resistance. It is suitable for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Viscosity Medium
Akulon® F127 by DSM is a low/ medium viscosity PA 6 grade. It is suitable for processing by cast film extrusion. It exhibits good chemical resistance. Akulon® F127 is used in food contact... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Medium viscosity
Akulon® F128 by DSM is a medium viscosity PA 6 grade. It exhibits good chemical resistance. It is suitable for processing by cast film extrusion. Akulon® F128 is used in food contact applications... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Medium viscosity
Akulon® F130 by DSM is a medium viscosity, food contact polyamide 6 grade. It exhibits good chemical resistance. It is suitable for processing by cast film extrusion. It is used in consumer goods... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Viscosity Medium
Akulon® F130-C by DSM is a medium viscosity polyamide 6 grade. It is lubricated and exhibits good chemical resistance. It is suitable for processing by cast film extrusion. Akulon® F130-C is used in... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity Medium
Akulon® F130-C1 by DSM is a lubricated, medium viscosity, food contact polyamide 6 grade. It exhibits good chemical resistance. It is suitable for processing by cast film extrusion. It is used in... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity Medium
Akulon® F130-C2 by DSM is a medium viscosity, lubricated, food contact polyamide 6 grade. It is suitable for processing by cast film extrusion. It exhibits good chemical resistance. It is used in... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Medium viscosity
Akulon® F130-C3 by DSM is a medium viscosity, monofilament polyamide 6 grade. It is lubricated and exhibits good chemical resistance. It is suitable for processing by cast film extrusion. Akulon®... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Medium viscosity
Akulon® F130-E5 by DSM is a medium viscosity polyamide 6 grade. It is nucleated and lubricated. It contains anti-blocking agent and exhibits good chemical resistance. Akulon® F130-E5 is suitable for... view more
Features
  • Antiblocking
  • Chemical resistance Good
  • Lubricated
  • Nucleated
Akulon® F132 by DSM is a high viscosity polyamide 6 grade. It is suitable for processing by cast film extrusion. It exhibits good chemical resistance. Akulon® F132 is used in food contact... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Viscosity High
Akulon® F132-C1 by DSM is a high viscosity, food contact polyamide 6 grade. It is lubricated and exhibits good chemical resistance. It is suitable for processing by cast film extrusion. It is used... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® F132-E1 by DSM is a medium/ high viscosity, food contact polyamide 6 grade. It is nucleated and lubricated. It exhibits good chemical resistance. It is suitable for processing by cast film... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Nucleated
  • ...
Akulon® F132-E2 by DSM is a high viscosity, food contact polyamide 6 grade. It is lubricated and nucleated. It is suitable for processing by cast film extrusion. It exhibits good chemical... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Nucleated
  • ...
Akulon® F136 by DSM is a food contact polyamide 6 grade. It is suitable for processing by cast film extrusion. It exhibits very high viscosity and good chemical resistance. It is used in consumer... view more
Features
  • Chemical resistance High
  • Food Contact Acceptable
  • Viscosity High
Akulon® F136-C by DSM is a lubricated, food contact polyamide 6 grade. It exhibits very high viscosity and good chemical resistance. It is suitable for processing by cast film extrusion. It is used... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® F136-C1 by DSM is a very high viscosity, food contact polyamide 6 grade. It is lubricated and exhibits good chemical resistance. It is suitable for processing by cast film extrusion. It is... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® F136-DH by DSM is a high viscosity, polyamide 6 grade. It is lubricated, nucleated and contains release agent. It is Heat stabilized and exhibits chemical resistance. It is suitable for... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Lubricated
  • Nucleated
  • ...
Akulon® F136-E1 by DSM is a very high viscosity, food contact polyamide 6 grade. It exhibits good chemical resistance. It is lubricated and nucleated. It is suitable for processing by cast film... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Nucleated
  • ...
Akulon® F136-E2 by DSM is a food contact polyamide 6 grade. It is lubricated and nucleated. It exhibits very high viscosity and good chemical resistance. It is used in consumer goods and healthcare... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Nucleated
  • ...
Akulon® F150-CZ by DSM is a very high viscosity, lubricated, food contact polyamide 6 grade. It is suitable for processing by extrusion. It exhibits good chemical resistance. Akulon® F150-CZ is... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® F160-Z by DSM is lubricated, very high viscosity, food contact polyamide 6 grade. It exhibits good chemical resistance. It is suitable for processing by extrusion. Akulon® F160-Z is... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® F223-D by DSM is a low/ medium viscosity, polyamide 6 grade containing release agent. It is suitable for processing by injection molding. It exhibits good chemical resistance. Akulon® F223-D... view more
Features
  • Chemical resistance Good
  • Viscosity Medium
Akulon® F223-DV by DSM is an unreinforced and flame retardant polyamide 6 (PA 6) grade. It exhibits low-medium viscosity and excellent chemical resistance. Akulon® F223-DV can be processed using... view more
Features
  • Viscosity Medium
  • Chemical resistance High
  • Unfilled
  • Flame retarded
Akulon® F230-C by DSM is a lubricated, medium viscosity polyamide 6 grade. It is suitable for processing by injection molding and extrusion. It exhibits good chemical resistance... view more
Features
  • Chemical resistance Good
  • Lubricated
  • Viscosity Medium
Akulon® F232 by DSM is a medium/high viscosity polyamide 6 grade. It exhibits good chemical resistance. Is suitable for processing by extrusion... view more
Applications
Features
  • Chemical resistance Good
  • Viscosity High
Akulon® F232-D by DSM is a high viscosity polyamide 6 grade. It exhibits good chemical resistance. It is suitable for processing by extrusion... view more
Features
  • Chemical resistance Good
  • Viscosity High
Akulon® F234-C by DSM is a high viscosity, lubricated polyamide 6 grade. It is suitable for processing by cast film extrusion. It exhibits good chemical resistance. Akulon® F234-C is used in food... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® F236-C by DSM is a lubricated, high viscosity, food contact polyamide 6 grade. It exhibits good chemical resistance. It is suitable for processing by extrusion. Akulon® F236-C is recommended... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® Fuel Lock FL-LP by DSM is UV stabilized, low fuel permeation polyamide 6 grade. It contains release agent and exhibits excellent chemical resistance. It can be processed using extrusion and... view more
Features
  • Chemical resistance Good
  • UV Stabilized
Akulon® Fuel Lock FL40-HPX1 BK00002 by DSM is a low fuel permeation polyamide 6 grade. It is heat- and UV stabilized. It exhibits excellent chemical resistance. It can be processed using blow... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • UV Stabilized
Akulon® Fuel Lock FL40-HPX1 NA99001 by DSM is an impact modified, low fuel permeation polyamide 6 grade. It exhibits excellent chemical resistance. It is heat- and UV- stabilized. It can be... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Impact modified
  • UV Stabilized
Akulon® Fuel Lock FL40-HPX2 BK00002 by DSM is an impact modified, low fuel permeation polyamide 6 grade. It exhibits excellent chemical resistance. It can be processed using extrusion blow molding... view more
Features
  • Impact modified
  • Chemical resistance High
Akulon® Fuel Lock FLE-LP BK29011 by DSM is UV stabilized, low fuel permeation polyamide 6 grade. It is suitable for processing by injection molding. It exhibits excellent chemical resistance and... view more
Features
  • Chemical resistance Good
  • UV Stabilized
Akulon® Fuel Lock FLE-LP NA99001 by DSM is a polyamide 6 grade. It exhibits low fuel permeation. It can be processed by injection molding. Akulon® Fuel Lock FLE-LP NA99001 is recommended for welding... view more
Features
  • Unfilled
Akulon® Fuel Lock FLE40-HP by DSM is a low fuel permeation polyamide 6 (PA6-I) grade. It exhibits excellent chemical resistance. It is heat- and UV stabilized. It is suitable for processing by blow... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • UV Stabilized
Akulon® GA-XLG0 by DSM is UV stabilized, polyamide 6 grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. Akulon® GA-XLG0 is used in automotive interior... view more
Features
  • Filled Glass Fiber
  • UV Stabilized
Akulon® GA-XLG6 by DSM is UV stabilized, polyamide 6 grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Akulon® GA-XLG6 is used in automotive interior... view more
Features
  • Filled Glass Fiber
  • UV Stabilized
Akulon® HR-HG6 by DSM is a heat stabilized, polyamide 66 grade reinforced with 30% glass fiber. It contains release agent. It exhibits chemical- and hydrolysis- resistance. It is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
Akulon® HR-HG7 by DSM is a heat stabilized, polyamide 66 grade reinforced with 35% glass fiber. It exhibits chemical- and hydrolysis- resistance. It contains release agent. It is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
Akulon® K122/F by DSM is a low viscosity, polyamide 6 grade. It is suitable for processing by extrusion. It exhibits good chemical resistance. Akulon® K122/F is used in food contact applications. It... view more
Applications
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Viscosity Low
Akulon® K125/A by DSM is a low viscosity, polyamide 6 grade. It exhibits good chemical resistance. It is suitable for processing by extrusion. Akulon® K125/A is used in food contact applications... view more
Applications
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Viscosity Low
Akulon® K222-D by DSM is a food contact, low viscosity, polyamide 6 grade. It is suitable for processing by injection molding. It contains release agent and exhibits good chemical resistance... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Viscosity Low
Akulon® K222-KGMV14 by DSM is a halogen-free, phosphorous-free, flame retardant polyamide 6 grade reinforced with 5% glass fiber and 20% mineral fiber. It is suitable for processing by injection... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled Mineral
  • Flame retarded Halogen free
  • ...
Akulon® K222-KGV4 by DSM is a halogen-free, phosphorous-free, flame retardant polyamide 6 grade reinforced with 20% glass fiber. It contains release agent. It is suitable for processing by injection... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Heat stabilized
  • ...
Akulon® K222-KGV4 /A by DSM is a halogen-free, phosphorous-free, flame retardant polyamide 6 grade reinforced with 20% glass fiber. It contains release agent. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Heat stabilized
  • ...
Akulon® K222-KGV5 by DSM is a halogen-free, flame retardant polyamide 6 grade reinforced with 25% glass fiber. It is heat stabilized and exhibits chemical resistance. It contains release agent... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Heat stabilized
Akulon® K222-KGV6 by DSM is a halogen-free, phosphorous-free, flame retardant polyamide 6 grade reinforced with 30% glass fiber. It contains release agent. It is heat stabilized and exhibits... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Heat stabilized
  • ...
Akulon® K222-KMV5 by DSM is a halogen-free, flame retardant polyamide 6 grade reinforced with 25% mineral fiber. It is used in electrical components and power distribution applications like... view more
Features
  • Chemical resistance Good
  • Filled Mineral
  • Flame retarded Halogen free
  • Heat stabilized
Akulon® K222-KMV5 /A by DSM is a halogen-free, flame retardant polyamide 6 grade reinforced with 25% mineral fiber. It is heat- and color- stabilized. It exhibits chemical resistance and contains... view more
Features
  • Chemical resistance Good
  • Color stability Good
  • Filled Mineral
  • Flame retarded Halogen free
  • ...
Akulon® K222-KGMV14 by DSM is a heat stabilized polyamide 6 grade reinforced with 10% glass- and 20% mineral- fiber. It is suitable for processing by injection molding. It exhibits chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled Mineral
  • Heat stabilized
Akulon® K223-HM6 by DSM is a heat stabilized polyamide 6 grade reinforced with 30% mineral fiber. It is suitable for processing by injection molding. It exhibits chemical resistance and contains... view more
Features
  • Chemical resistance Good
  • Filled Mineral
  • Heat stabilized
Akulon® K223-KMV6 by DSM is a flame retardant, polyamide 6 grade reinforced with 30% mineral fiber. It is heat stabilized and exhibits chemical resistance. It is suitable for processing by injection... view more
Features
  • Chemical resistance Good
  • Filled Mineral
  • Flame retarded
  • Heat stabilized
Akulon® K223-KTP4 by DSM is an impact modified, heat stabilized polyamide 6 grade. It is suitable for processing by injection molding. Akulon® K223-KTP4 contains release agent and exhibits chemical... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Impact modified
Akulon® K223-P2 by DSM is an impact modified polyamide 6 grade. It is suitable for processing by injection molding. It contains release agent and exhibits chemical resistance... view more
Features
  • Chemical resistance Good
  • Impact modified
Akulon® K223-TP4 by DSM is an impact modified polyamide 6 grade. It is suitable for processing by injection molding. It exhibits chemical resistance. It contains release agent. Akulon® K223-TP4 is... view more
Features
  • Chemical resistance Good
  • Impact modified
Akulon® K224-G0 by DSM is a polyamide 6 grade reinforced with 20% glass fiber. It contains release agent and exhibits chemical resistance. Akulon® K224-G0 is suitable for processing by injection... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® K224-G2/A by DSM is a polyamide 6 grade reinforced with 10% glass fiber. It is suitable for processing by injection molding. It contains release agent and exhibits chemical resistance... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® K224-G3 by DSM is a polyamide 6 grade reinforced with 15% glass fiber. It contains release agent and exhibits chemical resistance. It is recommended for wheel chair rims in healthcare... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® K224-G4U by DSM is a lubricated, polyamide 6 grade reinforced with 23% glass fiber. It is suitable for processing by injection molding. Akulon® K224-G4U contains release agent and exhibits... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Lubricated
Akulon® K224-G6 by DSM is a polyamide 6 grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It exhibits chemical resistance. It contains release agent. It is... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® K224-G6-FC 99.99.99 by DSM is a polyamide 6 grade reinforced with 30% glass fiber. It exhibits good chemical resistance. It contains a release agent. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Food Contact Acceptable
Akulon® K224-G6-FC BK00001 by DSM is a polyamide 6 grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It exhibits good chemical resistance. It contains a... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Food Contact Acceptable
Akulon® K224-G6-FC NA99001 by DSM is a polyamide 6 grade reinforced with 30% glass fiber. It is used in food contact applications. It contains a release agent. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Food Contact Acceptable
Akulon® K224-G6U by DSM is a polyamide 6 grade reinforced with 33% glass fiber. It is heat stabilized and lubricated. It is suitable for processing by injection molding. It exhibits chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Akulon® K224-G7 by DSM is a polyamide 6 grade reinforced with 35% glass fiber. It is suitable for processing by injection molding. It contains release agent. Akulon® K224-G7 is heat stabilized and... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® K224-G8 by DSM is a polyamide 6 grade reinforced with 40% glass fiber. It exhibits chemical resistance. It contains release agent. It is suitable for processing by injection molding. Akulon®... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® K224-HG5 by DSM is a heat stabilized, polyamide 6 grade reinforced with 25% glass fiber. It is suitable for processing by injection molding. Akulon® K224-HG5 contains release agent and... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® K224-HG6 by DSM is a heat stabilized, polyamide 6 grade reinforced with 30% glass fiber. It contains release agent and exhibits chemical resistance. Akulon® K224-HG6 is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® K224-HG6U by DSM is a heat stabilized, lubricated, polyamide 6 grade reinforced with 33% glass fiber. It contains release agent and exhibits chemical resistance. Akulon® K224-HG6U is... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Akulon® K224-HG7 by DSM is a polyamide 6 grade reinforced with 35% glass fiber. It is suitable for processing by injection molding. It is heat stabilized and exhibits chemical resistance. It... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® K224-HG8 by DSM is a polyamide 6 grade reinforced with 40% glass fiber. It is heat stabilized and exhibits chemical resistance. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® K224-HGM35 by DSM is a heat stabilized polyamide 6 grade reinforced with 15% glass- and 25% mineral- fiber. It exhibits chemical resistance and is lubricated. It is suitable for processing... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled Mineral
  • Heat stabilized
  • ...
Akulon® K224-HPG3 by DSM is a heat stabilized, impact modified, polyamide 6 grade reinforced with 15% glass fiber. It is suitable for processing by injection molding. Akulon® K224-HPG3 contains... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Impact modified
Akulon® K224-LG6 /E by DSM is a polyamide 6 grade reinforced with 30% glass fiber. It offers improved UV-stability and chemical resistance. It is suitable for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • UV Stabilized
Akulon® K224-LG7/E by DSM is a UV stabilized, polyamide 6 grade reinforced with 35% glass fiber. It can be processed by injection molding. Akulon® K224-LG7/E shows good chemical resistance... view more
Features
  • Filled Glass Fiber
  • UV Stabilized
  • Chemical resistance Good
Akulon® K224-LGM35 by DSM is a polyamide 6 grade reinforced with 15% glass- and 25% mineral- fiber. It offers improved UV-stability and chemical resistance. It is lubricated and light stabilized. It... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled Mineral
  • Light Stabilized
  • ...
Akulon® K224-LPG6U by DSM is an impact modified, UV stabilized, polyamide 6 grade reinforced with 33% glass fiber. It is lubricated and light stabilized. It offers chemical resistance. It contains... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Impact modified
  • Light Stabilized
  • ...
Akulon® K224-PG2 by DSM is an impact modified polyamide 6 grade reinforced with 8% glass fiber. It is suitable for processing by injection molding. It contains release agent. Akulon® K224-PG2... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Impact modified
Akulon® K224-PG3 by DSM is an impact modified polyamide 6 grade reinforced with 15% glass fiber. It is suitable for processing by injection molding. It contains release agent and exhibits chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Impact modified
Akulon® K224-PG6 by DSM is an impact modified polyamide 6 grade reinforced with 30% glass fiber. It contains release agent and exhibits chemical resistance. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Impact modified
Akulon® K224-PG8 by DSM is an impact modified polyamide 6 grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It contains release agent and exhibits chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Impact modified
Akulon® K224-TG9 by DSM is a polyamide 6 grade reinforced with 45% glass fiber. It is suitable for processing by injection molding. It exhibits chemical resistance. Akulon® K224-TG9 is used in... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® K225-KS by DSM is a halogen-free, flame retardant polyamide 6 grade. It is suitable for processing by injection molding. It is heat stabilized and exhibits chemical resistance. It contains... view more
Features
  • Chemical resistance Good
  • Flame retarded Halogen free
  • Heat stabilized
Akulon® K225-KV by DSM is a halogen-free, flame retardant polyamide 6 grade. It is suitable for processing by injection molding. It contains release agent. Akulon® K225-KV is heat stabilized and... view more
Features
  • Chemical resistance Good
  • Flame retarded Halogen free
  • Heat stabilized
Akulon® K227-XHG6 by DSM is a heat stabilized, polyamide 6 grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It exhibits chemical resistance. It contains... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® K240-HP by DSM is a heat stabilized and impact modified polyamide 6 grade. It is suitable for processing by extrusion blow molding. It exhibits chemical resistance. Akulon® K240-HP is used... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Impact modified
Akulon® K240-HPG3 by DSM is a heat stabilized polyamide 6 grade reinforced with 15% glass fiber. It exhibits chemical resistance. It is suitable for processing by extrusion blow molding. Akulon®... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® M-1016 by DSM is a heat stabilized, polyamide 66 grade reinforced with 33% glass fiber. It is lubricated and contains release agent. It exhibits chemical resistance. Akulon® M-1016 is... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Akulon® N22D by DSM is a low viscosity, polyamide 6 grade. It contains release agent. It exhibits chemical resistance. Akulon® N22D is suitable for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Viscosity Low
Akulon® N24-G6 by DSM is a polyamide 6 grade reinforced with 30% glass fiber. It contains release agent. It exhibits chemical resistance. Akulon® N24-G6 is suitable for processing by injection... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® N24-G7 by DSM is a polyamide 6 grade reinforced with 35% glass fiber. It contains release agent. It is suitable for processing by injection molding. Akulon® N24-G7 exhibits chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® N24-G8 by DSM is a polyamide 6 grade reinforced with 40% glass fiber. It contains release agent and exhibits chemical resistance. Akulon® N24-G8 is suitable for processing by injection... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® N24-HM6 by DSM is a 30% mineral reinforced, heat stabilized polyamide 6 grade. It shows good chemical resistance. It is suitable for processing by injection molding... view more
Features
  • Filled Mineral
  • Chemical resistance Good
  • Heat stabilized
Akulon® PA6-HG12 UD by DSM is a continuous glass fiber reinforced Polyamide 6 black colored grade. It is heat-stabilized and is suitable for uni-directional tape. Akulon® PA6-HG12 UD is used in... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
Akulon® PA66-HG12 UD by DSM is a heat-stabilized, black colored, continuous glass fiber reinforced polyamide 66. It is suitable for uni-directional tape. Akulon® PA66-HG12 UD is recommended for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
Akulon® RePurposed RE BK00003 by DSM is a polyamide 6 grade. It contains recycled content. It can be processed by injection molding. It offers chemical resistance... view more
Features
  • Chemical resistance Good
  • Recyclable
Akulon® RePurposed RE15 BK00003 by DSM is a polyamide 6 grade reinforced with 15% glass fiber. It contains recycled content. It can be processed by injection molding. Akulon® RePurposed RE15 BK00003... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Recyclable
Akulon® RePurposed RE30 BK00003 by DSM is a polyamide 6 grade reinforced with 30% glass fiber. It can be processed by injection molding. It contains recycled content. It offers chemical resistance... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Recyclable
Akulon® S222 by DSM is a is a low viscosity, food contact polyamide 66 grade. It exhibits chemical resistance. Akulon® S222 is suitable for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Viscosity Low
Akulon® S223-D by DSM is a low/ medium viscosity, nucleated, polyamide 66 grade. It contains release agent. It exhibits chemical resistance. It is suitable for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Nucleated
  • Viscosity Medium
Akulon® S223-DH by DSM is a low/ medium viscosity, polyamide 66 grade. It is nucleated and heat stabilized. It contains release agent. It exhibits chemical resistance. Akulon® S223-DH is suitable... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Nucleated
  • Viscosity Medium
Akulon® S223-E by DSM is a low/ medium viscosity, lubricated, polyamide 66 grade. It contains release agent. It is suitable for processing by injection molding. It exhibits chemical resistance... view more
Features
  • Chemical resistance Good
  • Lubricated
  • Viscosity Medium
Akulon® S223-EH by DSM is a low/ medium viscosity, polyamide 66 grade. It is lubricated and heat stabilized. It contains release agent. It exhibits chemical resistance. Akulon® S223-EH is suitable... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Lubricated
  • Viscosity Medium
Akulon® S223-F by DSM is a low/ medium viscosity, polyamide 66 grade. It is suitable for processing by injection molding. It exhibits chemical resistance. Akulon® S223-F is lubricated and contains... view more
Features
  • Chemical resistance Good
  • Lubricated
  • Viscosity Medium
Akulon® S223-G4U by DSM is a polyamide 66 grade reinforced with 23% glass fiber. It contains release agent. It is suitable for processing by injection molding. Akulon® S223-G4U is lubricated and... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Lubricated
Akulon® S223-G6 by DSM is a polyamide 66 grade reinforced with 30% glass fiber. It contains release agent and exhibits chemical resistance. It is suitable for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® S223-G7 by DSM is a polyamide 66 grade reinforced with 35% glass fiber. It exhibits chemical resistance. Akulon® S223-G7 is suitable for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Akulon® S223-HG0 by DSM is a heat stabilized, polyamide 66 grade reinforced with 50% glass fiber. It exhibits chemical resistance and contains release agent. Akulon® S223-HG0 is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® S223-HG3 by DSM is a heat stabilized, polyamide 66 grade reinforced with 15% glass fiber. It is lubricated and exhibits chemical resistance. It contains release agent. Akulon® S223-HG3 is... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Akulon® S223-HG6 by DSM is a heat stabilized, polyamide 66 grade reinforced with 30% glass fiber. It contains release agent and exhibits chemical resistance. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® S223-HG7 by DSM is a heat stabilized, polyamide 66 grade reinforced with 35% glass fiber. It is suitable for processing by injection molding. It contains release agent and exhibits chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® S223-HPG5 by DSM is a heat stabilized, impact modified, polyamide 66 grade reinforced with 25% glass fiber. It is resistant to oil and grease. It is suitable for processing by injection... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Grease Resistant
  • Heat stabilized
  • ...
Akulon® S223-KG6 by DSM is a heat stabilized, polyamide 66 grade reinforced with 30% glass fiber. It contains release agent and exhibits chemical resistance. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Akulon® S227-C by DSM is a medium viscosity, lubricated, polyamide 66 grade. It exhibits good chemical resistance. It is suitable for processing by extrusion and injection molding. Akulon® S227-C is... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity Medium
Akulon® S240-C by DSM is a food contact, high viscosity, polyamide 66 grade. It is lubricated and exhibits good chemical resistance. It is suitable for processing by extrusion and injection molding... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® S245-C by DSM is a food contact, high viscosity polyamide 66 grade. It is lubricated and exhibits chemical resistance. Akulon® S245-C is suitable for processing by blow molding extrusion... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® SG-KGS6 by DSM is a halogen-free, phosphorous-free, flame retardant polyamide 66 grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It contains... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Phosphorous Free
Akulon® SG-KGS6/HV by DSM is a halogen free polyamide 66 grade reinforced with 30% glass fiber. It exhibits high flow and is red phosphorous-free. Akulon® SG-KGS6/HV is suitable for processing by... view more
Features
  • Filled Glass Fiber
  • Flow High
  • Halogen Free
  • Phosphorous Free
Akulon® SafeConnect SC21 by DSM is a flame retardant polyamide 66 grade. It is suitable for processing by injection molding. It shows chemical resistance... view more
Features
  • Chemical resistance Good
  • Flame retarded
Akulon® SafeConnect SC22 by DSM is a flame retardant polyamide 66 grade reinforced with 25% glass fiber. It is suitable for processing by injection molding. It shows chemical resistance. Akulon®... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
Akulon® TC185 by DSM is a heat stabilized, flame retardant polyamide 6 grade. It is a thermally conductive material. It is suitable for processing by injection molding. Akulon® TC185 contains... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Heat stabilized
  • Thermally Conductive
Akulon® Ultraflow K-FG0 by DSM is a high flow, polyamide 6 grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. It exhibits chemical resistance. It is used in... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
Akulon® Ultraflow K-FG12 by DSM is a high flow, polyamide 6 grade reinforced with 60% glass fiber. It exhibits chemical resistance. It is suitable for processing by injection molding. Akulon®... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
Akulon® Ultraflow K-FG5 by DSM is a high flow, polyamide 6 grade reinforced with 25% glass fiber. It is suitable for processing by injection molding. Akulon® Ultraflow K-FG5 exhibits chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
Akulon® Ultraflow K-FG6 by DSM is a high flow, polyamide 6 grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It exhibits chemical resistance. Ultraflow K-FG6... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
Akulon® Ultraflow K-FG9 by DSM is a high flow, polyamide 6 grade reinforced with 45% glass fiber. It exhibits chemical resistance. It contains release agent. Akulon® Ultraflow K-FG9 is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
Akulon® Ultraflow K-FHG0 by DSM is a heat stabilized, high flow, polyamide 6 grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. It exhibits chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
Akulon® Ultraflow K-FHG12 by DSM is a heat stabilized, high flow, polyamide 6 grade reinforced with 60% glass fiber. It is suitable for processing by injection molding. Akulon® Ultraflow K-FHG12... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
Akulon® Ultraflow K-FHG6 by DSM is a high flow, heat stabilized, polyamide 6 grade reinforced with 30% glass fiber. It exhibits chemical resistance. It is suitable for processing by injection... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
Akulon® Ultraflow K-FHG6/B by DSM is a high flow, heat stabilized, polyamide 6 grade reinforced with 30% glass fiber. It exhibits chemical resistance and improved processing. It is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
  • ...
Akulon® Ultraflow K-FHG7/A by DSM is a high flow, heat stabilized, polyamide 6 grade reinforced with 35% glass fiber. It exhibits chemical resistance and contains release agent. It is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
Akulon® Ultraflow K-FHG8 by DSM is a high flow, heat stabilized, polyamide 6 grade reinforced with 40% glass fiber. It exhibits chemical resistance and contains release agent. It is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
Akulon® Ultraflow K-FHGM24 by DSM is a high flow, heat stabilized, polyamide 6 grade reinforced with 10% glass- and 20% mineral- fiber. It exhibits chemical resistance. It is suitable for processing... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled Mineral
  • Flow High
  • ...
Akulon® Ultraflow K-FHGM35 by DSM is a high flow, heat stabilized, polyamide 6 grade reinforced with 15% glass- and 25% mineral- fiber. It contains release agent. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled Mineral
  • Flow High
  • ...
Akulon® Ultraflow K-FHGR24 by DSM is a high flow, heat stabilized, polyamide 6 grade reinforced with 10% glass fiber and 20% glass beads. It contains release agent. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
Akulon® Ultraflow K-FKG3 by DSM is a 15% glass fiber reinforced, polyamide 6 grade. It can be processed by injection molding. It shows chemical resistance and high flow... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
Akulon® Ultraflow K-FKG6 by DSM is a high flow, heat stabilized, polyamide 6 grade reinforced with 30% glass fiber. It exhibits chemical resistance. Akulon® Ultraflow K-FKG6 is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
Akulon® Ultraflow K-FKG8 by DSM is a high flow, heat stabilized, polyamide 6 grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It exhibits chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
Akulon® Ultraflow K-FKGS6/B by DSM is a flame retardant, heat stabilized, polyamide 6 grade reinforced with 30% glass fiber. It exhibits high flow and good chemical resistance. It is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Akulon® Ultraflow K-FKMV5 by DSM is a halogen free, flame retardant, polyamide 6 grade reinforced with 25% mineral fiber. It exhibits high flow and good chemical resistance. It contains release... view more
Features
  • Chemical resistance Good
  • Filled Mineral
  • Flame retarded
  • Flow High
  • ...
Akulon® Ultraflow K-FKMV5/C by DSM is a halogen free, flame retardant, polyamide 6 grade reinforced with 25% mineral fiber. It is suitable for processing by injection molding. It exhibits high flow... view more
Features
  • Chemical resistance Good
  • Filled Mineral
  • Flame retarded
  • Flow High
  • ...
Akulon® Ultraflow K-FPG8 by DSM is a high flow, impact modified, polyamide 6 grade reinforced with 40% glass fiber. It exhibits chemical resistance and contains release agent. It is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Impact modified
Akulon® Ultraflow K220-HGM44 by DSM is a heat stabilized, polyamide 6 grade reinforced with 20% glass- and 20% mineral- fiber. It exhibits chemical resistance. It contains release agent. It is... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled Mineral
  • Heat stabilized
Akulon® XG-FKGS6 by DSM is a halogen free, flame retardant, polyamide 6 grade reinforced with 30% glass fiber. It exhibits chemical resistance. It is suitable for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
Akulon® XS236-C by DSM is a high viscosity, lubricated polyamide 6 grade. It is a food contact quality grade. It can be processed by extrusion... view more
Applications
Features
  • Viscosity High
  • Food Contact Acceptable
  • Lubricated
Akulon® XS32 (F-X08057) by DSM is a high viscosity, lubricated, polyamide 6 neat resin. It is a food contact quality grade. It can be processed by cast film extrusion... view more
Features
  • Copolymer
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® XS32-C1 (FC-X9207) by DSM is a high viscosity, lubricated, polyamide 6 copolymer. It can be processed by cast film extrusion. It is used in food contact applications... view more
Features
  • Copolymer
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Akulon® XS36-C1 (FC-X9224) by DSM is a very high viscosity, lubricated, food contact, polyamide 6 copolymer. It is suitable for processing by cast film extrusion. Akulon® XS36-C1 (FC-X9224) is used... view more
Features
  • Copolymer
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
EcoPaXX® Q-DWX6 by DSM is a bio-based, long chain polyamide 4-10 (PA 4-10) grade reinforced with 30% glass fiber. Possesses excellent surface properties and very high melting point. It is made from... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Filled Glass Fiber
  • Food contact approved
  • ...
EcoPaXX® Q-E7300 is a PA 4-10 polyamide based on castor oil by DSM that is particularly suitable for use in high-tech applications due to its low moisture absorption and excellent mechanical... view more
Features
  • Chemical resistance Good
  • Hydrolysis Resistant
  • Moisture Absorption Low
  • Renewable Resource Content
  • ...
EcoPaXX® Q-FP4 by DSM is an impact modified, non-reinforced, long chain polyamide 4-10 (PA 4-10) grade. It is produced from tropical castor beans. It contains release agent and 56% bio-based... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Flow Good
  • Impact modified
  • ...
EcoPaXX® Q-HG10 is a heat-stabilized, 50% glass fiber-reinforced, PA4-10 by DSM based on castor oil that is particularly suitable for use in high-tech applications due to its low moisture absorption... view more
Applications
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
  • ...
EcoPaXX® Q-HG6 by DSM is a heat stabilized, 30% glass fiber-reinforced, polyamide (PA410) based on castor oil that is particularly suitable for use in high-tech applications due to its low moisture... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Hydrolysis Resistant
  • Moisture Absorption Low
  • ...
EcoPaXX® Q-HG7 by DSM is a heat-stabilized, long chain polyamide 4-10 (PA 4-10) grade reinforced with 35% glass fiber. It contains release agent and 70% bio-based content. It is produced from... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Filled Glass Fiber
  • Heat stabilized
  • ...
EcoPaXX® Q-HG8 by DSM is a 40% glass fiber-reinforced, long chain polyamide 4-10 (PA 4-10) grade. It contains release agent and 70% bio-based content. It is produced from tropical castor beans... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Filled Glass Fiber
  • Heat stabilized
  • ...
EcoPaXX® Q-HGM24 by DSM is a heat stabilized, 10% glass reinforced, 20% mineral reinforced polyamide (PA410) based on castor oil that is particularly suitable for use in high-tech applications due... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
  • ...
EcoPaXX® Q-HXGM24 by DSM is a heat-stabilized, glass fiber-reinforced, mineral-reinforced polyamide (PA410) based on castor oil that is particularly suitable for use in high-tech applications due to... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
  • ...
EcoPaXX® Q-KG5 by DSM is a long chain polyamide 4-10 (PA 4-10) grade reinforced with 25% glass fiber. Exhibits low moisture absorption, very high melting point and high crystallization rate. It is... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Filled Glass Fiber
  • Moisture Absorption Low
EcoPaXX® Q-KG6 by DSM is a heat-stabilized, glass fiber-reinforced polyamide (PA410) based on castor oil that is particularly suitable for use in high-tech applications due to its low moisture... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • Hydrolysis Resistant
  • ...
EcoPaXX® Q-KGS6 by DSM is a flame-retardant, halogen-free, 30% glass reinforced, polyamide (PA410) based on castor oil that is particularly suitable for use in high-tech applications due to its low... view more
Applications
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Hydrolysis Resistant
  • ...
EcoPaXX® Q-KGS8 (Q-X07132) by DSM is a flame retardant, halogen-free, 40% glass fiber reinforced, long chain polyamide 4-10 (PA 4-10) grade. Contains 60% bio-based content and release agent. It is... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Filled Glass Fiber
  • Flame retarded
  • ...
EcoPaXX® Q-KS by DSM is a halogen & phosphorus-free, flame retardant, non-reinforced, long chain polyamide 4-10 (PA 4-10) grade. It is produced from tropical castor beans & contains 60% bio-based... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Flame retarded
  • Halogen Free
  • ...
EcoPaXX® Q-KV by DSM is a flame retardant, non-reinforced, halogen- & phosphorus free, long chain polyamide 4-10 (PA 4-10) grade. It contains release agent and 62% bio-based content agent. It is... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Flame retarded
  • Halogen Free
  • ...
EcoPaXX® Q-PG6 by DSM is an impact modified PA4-10 grade reinforced with 30% glass fibers. It is suitable for injection molding applications coupled with fast cycles and a large processing window... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Grease Resistant
  • ...
EcoPaXX® Q-PG8 (Q-X07209) by DSM is a 40% glass fiber-reinforced, impact-modified polyamide (PA410) based on castor oil that is particularly suitable for use in high-tech applications due to its low... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Hydrolysis Resistant
  • Impact modified
  • ...
EcoPaXX® Q-Y is an impact modified PA4-10 grade by DSM. It is suitable for injection molding applications coupled with fast cycles and a large processing window which gives increased productivity... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Grease Resistant
  • ...
EcoPaXX® Q150-D is a low/medium viscosity polyamide (PA410) based on castor oil by DSM that is particularly suitable for use in high-tech applications due to its low moisture absorption and... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Hydrolysis Resistant
  • Moisture Absorption Low
  • ...
EcoPaXX® Q150E by DSM is a low-medium viscosity, non-reinforced, long chain polyamide 4-10 (PA 4-10) grade. It is produced from tropical castor beans and contains 70% bio-based content. Exhibits low... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Moisture Absorption Low
  • Unfilled
  • ...
EcoPaXX® Q170E by DSM is a non-reinforced, medium viscosity, long chain polyamide 4-10 (PA 4-10) grade. Exhibits low moisture absorption, very high melting point and high crystallization rate. It is... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Moisture Absorption Low
  • Unfilled
  • ...
EcoPaXX® Q170E-H by DSM is a heat-stabilized, unfilled, long chain polyamide 4-10 (PA 4-10) grade. Possesses medium viscosity and very high melting point. It is made from tropical castor beans and... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Heat stabilized
  • Moisture Absorption Low
  • ...
EcoPaXX® Q210E-H by DSM is a high viscosity, non-reinforced, long chain polyamide 4-10 (PA 4-10) grade. It is produced from tropical castor beans and contains 70% bio-based content. Exhibits low... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Heat stabilized
  • Moisture Absorption Low
  • ...
ForTii® Ace MX51 by DSM is a heat stabilized, high temperature polyamide 4T (PA 4T) grade reinforced with 30% glass fiber. Suitable for processing by injection molding. ForTii® Ace MX51 is... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Strength High Temperature
ForTii® Ace MX52 by DSM is a 40% glass fiber reinforced, heat stabilized, high temperature polyamide 4T (PA 4T) grade. Exhibits good chemical stability, high strength and stiffness. Suitable for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Stiffness High
  • Strength High
  • ...
ForTii® Ace MX53 by DSM is a high temperature polyamide 4T (PA 4T) grade reinforced with 50% glass fiber. Shows good chemical & heat stability, high strength and stiffness. Can be processed by... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Stiffness High
  • Strength High
  • ...
ForTii® Ace MX53T by DSM is a 50% glass reinforced polyphthalamide grade. It can be processed by injection molding. It exhibits heat stability. It is designed to replace metal in structural parts... view more
Features
  • Filled
  • Heat stabilized
ForTii® Ace WX51-FC by DSM is a 30% glass reinforced polyphthalamide. It shows good high temperature and wet mechanical performance. ForTii® Ace WX51-FC exhibits weldline strength and weldline... view more
Features
  • Filled
  • Wetting Properties Good
  • Food contact approved
ForTii® Ace WX53-FC by DSM is a 50% glass reinforced, polyphthalamide. It shows good high temperature and wet mechanical performance. It exhibits weldline strength and weldline strength retention in... view more
Features
  • Chemical resistance Good
  • Filled
  • Food contact approved
ForTii® Ace XTR31 by DSM is an unreinforced, lubricated, polyphthalamide. It shows medium to high viscosity. It exhibits excellent viscosity stability, chemical resistance, barrier performance and... view more
Features
  • Chemical resistance Good
  • Lubricated
  • Unfilled
ForTii® CX33 by DSM is a 50% glass fiber reinforced polyphthalamide (PPA) grade. It exhibits excellent processability, very good chemical resistance, very high part strength up to 120°C, low warpage... view more
Features
  • Surface finish excellent
  • Warpage Low
  • Chemical resistance High
  • Filled Glass Fiber
  • ...
ForTii® CX33F by DSM is a 50% glass fiber reinforced, wear modified polyphthalamide (PPA) grade. It exhibits high stiffness, low warpage and excellent chemical resistance. It offers low friction and... view more
Features
  • Filled Glass Fiber
  • Chemical resistance High
  • Scratch Resistance Good
  • Friction Low
  • ...
ForTii® Eco E11 by DSM is a bio-based, high temperature soldering resistant, high performance polyamide grade. Partially produced from renewable resources and castor beans as the basis for C10... view more
Features
  • Flow High
  • Halogen Free
  • Heat Resistance High
  • Moisture Absorption Low
  • ...
ForTii® Eco LDS62 by DSM is a bio-based, high temperature soldering resistant, high performance polyamide grade. Partially produced from renewable resources and castor beans as the basis for C10... view more
Applications
Features
  • Flow High
  • Halogen Free
  • Heat Resistance High
  • Moisture Absorption Low
  • ...
ForTii® F11 by DSM is a halogen-free, red phosphorous-free, flame retardant polyamide 4T (PA4T) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Possesses... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • ...
ForTii® F11C by DSM is a halogen-free, red phosphorous-free, flame retardant polyamide 4T (PA4T) grade reinforced with 30% glass fiber. Is developed to reduce the color change following lead-free... view more
Features
  • Chemical resistance Good
  • Color stability Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
ForTii® F12 by DSM is a halogen-free, red phosphorous-free, flame retardant polyamide 4T (PA4T) grade reinforced with 40% glass fiber. Is suitable for processing by injection molding. Possesses high... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • ...
ForTii® F81 by DSM is a halogen-free, red phosphorous-free, flame retardant polyamide 4T (PA4T) grade reinforced with 15% glass fiber. Is suitable for processing by injection molding. Possesses... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • ...
ForTii® H11 by DSM is a halogen-free, red phosphorous-free, flame retardant polyamide 4T (PA4T) grade reinforced with 30% glass fiber. Is suitable for processing by injection molding. Possesses 15%... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • ...
ForTii® JTX2 by DSM is a polyamide 4T (PA4T) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Shows good flow (one of the highest flows of any halogen-free... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flow Good
  • ...
ForTii® K11 by DSM is a lubricated polyamide 4T (PA4T) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Possesses high mechanical strength, good... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flow High
  • ...
ForTii® K12 by DSM is a lubricated polyamide 4T (PA4T) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. Possesses high stiffness and good dimensional... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Heat Aging Resistance Good
  • ...
ForTii® LDS51B by DSM is a halogen & red phosphorus free, flame retardant, high temperature polyamide 4T (PA 4T) grade reinforced with 30% glass fiber. Suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
  • Phosphorous Free
  • ...
ForTii® LDS85B by DSM is a 30% glass reinforced PPA grade. It can be processed by injection molding. It is recommended for laser direct structuring (LDS). It enables mechanical function integration... view more
Features
  • Ductile
  • Filled
  • Impact Resistance Good
  • Laser Markable
  • ...
ForTii® MX1 by DSM is a heat stabilized, high performance polyphthalamide based on polyamide 4T grade, reinforced with 30% glass fiber. It is partially aromatic, semi-crystalline and an alternative... view more
Features
  • Aromatic
  • Crystalline Semi
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
ForTii® MX15HR by DSM is a 35% glass reinforced polyphthalamide grade. It can be processed by injection molding. It exhibits heat stability and enhanced hydrolytic stability towards aggressive... view more
Features
  • Filled
  • Heat stabilized
  • Hydrolytically Stable
ForTii® MX2 by DSM is a high performance polyphthalamide based on polyamide 4T grade, reinforced with 40% glass fiber. It is partially aromatic, heat stabilized, semi-crystalline and an alternative... view more
Features
  • Aromatic
  • Crystalline Semi
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
ForTii® MX3 by DSM is a semi-crystalline, heat stabilized, high performance polyphthalamide based on polyamide 4T grade, reinforced with 50% glass fiber. It is partially aromatic and an alternative... view more
Features
  • Aromatic
  • Crystalline Semi
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
ForTii® NMX33 by DSM is a high temperature, 50% glass fiber reinforced polyamide (PA) grade. Possesses high stiffness, good thermal stability and high bond strength. It can be processed by injection... view more
Features
  • Filled Glass Fiber
  • Stiffness High
  • Strength High Temperature
  • Thermal Stability Good
ForTii® SP1 by DSM is a 50% glass reinforced PPA grade. It can be processed by injection molding... view more
Features
  • Filled
ForTii® T11 by DSM is a halogen-free, red phosphorous-free, flame retardant polyamide 4T (PA4T) grade reinforced with 30% glass fiber. Is suitable for processing by injection molding. Shows good... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • ...
ForTii® TX1 by DSM is a halogen-free, red phosphorous-free, flame retardant polyamide 4T (PA4T) grade reinforced with 30% glass fiber. Is suitable for processing by injection molding. Shows good... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • ...
ForTii® WF11 (P788A) by DSM is a 35% glass reinforced, heat stabilized, blend of polyphthalamide and polytetrafluoroethylene grade. It can be processed by injection molding. ForTii® WF11 (P788A) is... view more
Features
  • Heat stabilized
  • Wear resistance Good
  • Filled
ForTii® WX11-FC by DSM is a 30% glass reinforced polyphthalamide. It can be processed by injection molding. It shows excellent hydrolysis resistance, chemical resistance, processability and surface... view more
Features
  • Food contact approved
  • Filled
  • Processability Good
  • Hydrolysis Resistant
  • ...
ForTii® XS51 by DSM is a glass fiber reinforced, high temperature polyamide 4T (PA 4T) grade. It is a halogen & red phosphorous free, flame retardant grade. Suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
  • Phosphorous Free
  • ...
ForTii® XS81B by DSM is a high temperature polyamide 4T (PA 4T) grade reinforced with 50% glass fiber. Suitable for processing by injection molding. Recommended for antenna splitters, camera holder... view more
Features
  • Filled Glass Fiber
  • Strength High Temperature
Novamid® 1010 by DSM is a heat stabilized, lubricated, low viscosity, polyamide 6 grade. It is suitable for processing by injection molding. Shows excellent flow, fast molding cycles, excellent... view more
Features
  • Extinguishing Self
  • Strength High
  • Surface finish excellent
  • Heat stabilized
  • ...
Novamid® 1010C2 is a heat stabilized, lubricated, polyamide 6 grade by DSM. It is suitable for processing by injection molding. Shows excellent flow, fast molding cycles, excellent surface... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1010CH ES by DSM is a heat stabilized, low viscosity, polyamide 6 grade. It is a lubricated grade with release agent grade. Is suitable for processing by injection molding. Shows excellent... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1010J by DSM is a heat stabilized, low viscosity, polyamide 6 grade. It is suitable for processing by injection molding. Shows excellent flow, fast molding cycles, excellent surface... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1011CH5-KR by DSM is a heat stabilized, low viscosity, polyamide 6 grade. It is a lubricated with release agent grade. Suitable for processing by injection molding. Shows excellent flow... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1013 is a heat stabilized, lubricated, low viscosity, polyamide 6 grade by DSM. It is suitable for processing by injection molding. Shows excellent flow, fast molding cycles, excellent... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1013C5 by DSM is a heat stabilized, low viscosity, polyamide 6 grade. It is a lubricated and with release agent grade. Suitable for processing by injection molding. Shows excellent flow... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1013J by DSM is a heat stabilized, low viscosity, polyamide 6 grade. It is suitable for processing by injection molding. Shows excellent flow, fast molding cycles, excellent surface... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1015B by DSM is a heat stabilized, lubricated, low viscosity, polyamide 6 grade. It is suitable for processing by injection molding. Shows excellent flow, fast molding cycles, excellent... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1015C is a heat stabilized, lubricated, low viscosity, polyamide 6 grade by DSM. It is suitable for processing by injection molding. Shows excellent flow, fast molding cycles, excellent... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1020A7 by DSM is a melt stable, lubricated, polyamide 6 grade. It is suitable for processing by extrusion. Possesses toughness, superior strength, good performance at low temperature... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 1020CA2 by DSM is a lubricated, melt stable, medium viscosity, polyamide 6 grade. It is suitable for processing by cast film and air cooled blown film extrusion. Possesses toughness... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 1020J by DSM is a melt stable, lubricated, polyamide 6 grade. It is suitable for processing by extrusion. Possesses toughness, superior strength, good performance at low temperature... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 1030CA4 by DSM is a lubricated, melt stable, high viscosity, polyamide 6 grade. It is suitable for processing by cast film extrusion. Possesses toughness, superior strength, good... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 1030J by DSM is a melt stable polyamide 6 grade. It is suitable for processing by extrusion. Possesses toughness, superior strength, good performance at low temperature, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 1033NY by DSM is a lubricated, melt stable, very-high viscosity, polyamide 6 grade. It is suitable for processing by film extrusion. Possesses toughness, superior strength, good performance... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 1040A is a lubricated, melt stable, very-high viscosity, polyamide 6 grade by DSM. It is suitable for processing by film extrusion, blow molding and monofilament. Possesses toughness... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 1040J by DSM is a melt stable, very-high viscosity, polyamide 6 grade. It is suitable for processing by film extrusion. Possesses toughness, superior strength, good performance at low... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2010J by DSM is a polyamide (PA6/66) grade. Exhibits low viscosity. It is suitable for processing by injection molding. Possible applications of Novamid® 2010J include automotives and... view more
Features
  • Viscosity Low
Novamid® 2020A by DSM is a lubricated, melt stable, polyamide 6/66 grade. It is suitable for processing by film extrusion. Possesses toughness, superior strength, good performance at low... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2020A-1 by DSM is a lubricated, melt stable, medium viscosity, polyamide 6/66 grade. It is suitable for processing by cast film, air cooled and water chilled blown film and CoPA for film... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2020A-8 by DSM is a lubricated, melt stable, medium viscosity, polyamide 6/66 grade. It is suitable for processing by extrusion and is a CoPA for monofilament. Possesses toughness, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2020J by DSM is a melt stable polyamide 6/66 grade. It is suitable for processing by extrusion. Possesses toughness, superior strength, good performance at low temperature, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2030 by DSM is a lubricated polyamide (PA6/66) grade. It is suitable for processing by film extrusion. Possible applications of Novamid® 2030 include automotives and packaging industry... view more
Features
  • Lubricated
Novamid® 2030A by DSM is a lubricated, melt stable, high viscosity, polyamide 6/66 grade. It is suitable for processing by cast film, air cooled blown film and CoPA for film extrusion. Possesses... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2030A-8 by DSM is a lubricated, melt stable, high viscosity, polyamide 6/66 grade. It is suitable for processing by extrusion and is a CoPA for monofilament. Possesses toughness, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2030CA is a lubricated, melt stable, high viscosity, polyamide 6/66 grade by DSM. It is suitable for processing by cast film, air cooled blown film and CoPA for film extrusion. Possesses... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2030FC by DSM is a lubricated, melt stable, high viscosity, polyamide 6/66 grade. It is suitable for processing by cast film, air cooled blown film and CoPA for film extrusion. Possesses... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2030J by DSM is a melt stable polyamide 6/66 grade. It is suitable for processing by film extrusion. Possesses toughness, superior strength, good performance at low temperature, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2320A is a lubricated, melt stable, medium viscosity polyamide 6/66 grade by DSM. It is suitable for processing by extrusion and is a CoPA for monofilament. Possesses toughness, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2320AK6 by DSM is a polyamide (PA6/66) grade. It is suitable for processing by extrusion. It is lubricated. Possible applications of Novamid® 2320AK6 include automotives and packaging... view more
Features
  • Lubricated
Novamid® 2320J by DSM is a melt stable polyamide 6/66 grade. It is suitable for processing by film extrusion. Possesses toughness, superior strength, good performance at low temperature, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2330J by DSM is a melt stable polyamide 6/66 grade. It is suitable for processing by film extrusion. Possesses toughness, superior strength, good performance at low temperature, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2420A by DSM is a lubricated, melt stable polyamide 6/66 grade. It is suitable for processing by extrusion. Possesses toughness, superior strength, good performance at low temperature... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2420J by DSM is a melt stable polyamide 6/66 grade. It is suitable for processing by film extrusion. Possesses toughness, superior strength, good performance at low temperature, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2430A is a melt stable, high viscosity, polyamide 6/66 grade by DSM. It is suitable for processing by extrusion and is a CoPA for monofilament of higher transparency with large diameter... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2430A-1 by DSM is a soft, melt stable, high viscosity, polyamide 6/66 grade. It is suitable for processing by cast film, air cooled blown film and CoPA for film extrusion. Possesses high... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2430AH2 by DSM is a melt stable polyamide 6/66 grade. It is suitable for processing by film extrusion. Possesses toughness, superior strength, good performance at low temperature, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2430J by DSM is a melt stable polyamide 6/66 grade. It is suitable for processing by film extrusion. Possesses toughness, superior strength, good performance at low temperature, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2620J by DSM is a melt stable polyamide 6/6T grade. Is suitable for processing by film and sheet extrusion. Possesses toughness, superior strength, good performance at low temperature... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2934A by DSM is a melt stable, ultra-high viscosity, polyamide 6/66 grade. It is suitable for processing by film extrusion and is a CoPA for monofilament of high tenacity. Possesses... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® ES110J by DSM is an easy molding polyamide (PA 6) grade. It is suitable for processing by injection molding. Possible applications of Novamid® ES110J include automotives and packaging... view more
Novamid® ES113J by DSM is a low viscosity polyamide (PA 6) grade. It is suitable for processing by injection molding and extrusion. Possible applications of Novamid® ES113J include automotives and... view more
Features
  • Viscosity Low
Novamid® ID 1030 by DSM is a strong, ductile and easy to print polyamide (PA 6/66) grade. Novamid® ID 1030 is suitable for processing by 3D printing using fused filament fabrication (FFF) equipment... view more
Features
  • Ductile
  • Printability Excellent
Novamid® ID 1070 by DSM is a very ductile and strong, high performance, high value polyamide copolymer grade present as filaments. It can withstand harsh environments and high temperatures of up to... view more
Features
  • Adhesion Good
  • Copolymer
  • Crystalinity High
  • Ductile
  • ...
Stanyl® 46HF4130 by DSM is a lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Possesses high flow, low... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Cycle Time Short
  • Electrical Properties Good
  • ...
Stanyl® 46HF4530 by DSM is a lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Possesses high flow, low... view more
Features
  • Abrasion resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® 46HF4550 by DSM is a lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. Possesses high flow, low... view more
Features
  • Abrasion resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® 46HF5040 by DSM is a flame retardant, lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. Possesses... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® 46HF5050 by DSM is a flame retardant, lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. Possesses... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® 46SF5030 by DSM is a flame retardant, lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Possesses... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® CR310 by DSM is a 30% glass fiber reinforced, red-phosphorus & halogen-free, flame retardant polyamide 46 (PA 46) grade. It exhibits high flow and excellent chemical resistance. Stanyl®... view more
Features
  • Flow High
  • Flame retarded Halogen free
  • Filled Glass Fiber
  • Phosphorous Free
  • ...
Stanyl® Diablo HDT2700 by DSM is a lubricated, heat stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. Offers superior heat resistance, design stiffness, wear, friction and process... view more
Features
  • Filled Glass Fiber
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® Diablo OCD2100 BK27021 by DSM is a lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. Possesses... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® Diablo OCD2300 BLK by DSM is a lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. Possesses high... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® Diablo OCD2305 BM by DSM is a heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 25% glass fiber. It is suitable for processing by injection blow molding. Possesses high flow, low... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® HFX31S by DSM is a halogen-free, red phosphorous-free polyamide (PA 4-6) grade reinforced with 20% glass fiber. Exhibits high flow. Offers superior heat resistance, design stiffness, wear... view more
Features
  • Filled Glass Fiber
  • Flow High
  • Halogen Free
  • Heat Resistance High
  • ...
Stanyl® HFX31SW by DSM is a flame retarded, polyamide 46 grade. It is reinforced with 20% glass. It is halogen- & red phosphorous-free grade. Stanyl® HFX31SW can be processed by injection molding... view more
Features
  • Chemical resistance Good
  • Filled
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX31SW WT94001 by DSM is a flame retarded, polyamide 46 grade. It is reinforced with 20% glass. It exhibits high flow and chemical resistance. It is halogen- & red phosphorous-free grade... view more
Features
  • Chemical resistance Good
  • Filled
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX33S by DSM is a red phosphorous-free, halogen-free polyamide (PA 4-6) grade reinforced with 20% glass fiber. Offers superior heat resistance, design stiffness, wear and friction. Exhibits... view more
Features
  • Filled Glass Fiber
  • Flow High
  • Halogen Free
  • Heat Resistance High
  • ...
Stanyl® HFX50S by DSM is a lubricated, halogen-free, red phosphorous-free polyamide PA grade reinforced with 30% glass fiber. Offers superior heat resistance, design stiffness, wear and friction... view more
Features
  • Filled Glass Fiber
  • Halogen Free
  • Heat Resistance High
  • Lubricated
  • ...
Stanyl® HFX61S by DSM is a halogen-free, red phosphorous-free polyamide (PA 4-6) grade reinforced with 35% glass fiber. Exhibits high flow. Offers superior heat resistance, design stiffness, wear... view more
Features
  • Filled Glass Fiber
  • Flow High
  • Halogen Free
  • Heat Resistance High
  • ...
Stanyl® HFX63S by DSM is a flame retarded, polyamide 46 grade. It is reinforced with 35% glass. It is halogen- & red phosphorous-free grade. Stanyl® HFX63S can be processed by injection molding. It... view more
Features
  • Chemical resistance Good
  • Filled
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX82S by DSM is a halogen-free, red phosphorous-free polyamide (PA 4-6) grade reinforced with 45% glass fiber. Offers superior heat resistance, design stiffness, wear and friction. It is... view more
Features
  • Filled Glass Fiber
  • Halogen Free
  • Heat Resistance High
  • Phosphorous Free
  • ...
Stanyl® HGR1 by DSM is a polyamide 4-6 grade exhibiting improved performance, both in terms of mechanical properties, as well as its frictional and wear characteristics. Basically, part of the... view more
Features
  • Wear resistance Good
Stanyl® MC50 by DSM is a heat stabilized, flame retardant, halogen-free, phosphorous-free polyamide (PA 4-6) grade reinforced with 35% glass fiber. Offers superior heat resistance, design stiffness... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
  • Heat Resistance High
  • ...
Stanyl® MC51 by DSM is a flame retardant, halogen-free, heat stabilized, phosphorous-free polyamide (PA 4-6) grade reinforced with 35% glass fiber. Exhibits high flow. Offers superior heat... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • Halogen Free
  • ...
Stanyl® TC153 by DSM is a heat stabilized polyamide 4-6 (PA 4-6) grade. Is a lubricated, thermally conductive, flame retardant grade. It is suitable for processing by injection molding. Possesses... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TC154 by DSM is a heat stabilized polyamide 4-6 (PA 4-6) grade. Is a thermally conductive, flame retardant grade. It is suitable for processing by injection molding. Stanyl® TC154 possesses... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TC155 by DSM is a heat stabilized polyamide 4-6 (PA 4-6) grade. It is a lubricated, thermally conductive, flame retardant grade. It is suitable for processing by injection molding. Possesses... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TC168 (NC239B) by DSM is a thermally conductive, heat stabilized, flame retardant polyamide (PA 4-6) grade reinforced with 20% glass fiber. Offers superior heat resistance, design stiffness... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TC170 (P823C) by DSM is a laser markable, thermal conductive, polyamide 46. It is reinforced with 20% glass. Stanyl® TC170 (P823C) can be processed by injection molding. It shows chemical... view more
Features
  • Chemical resistance Good
  • Filled
  • Laser Markable
Stanyl® TC502 by DSM is a heat stabilized, thermally conductive polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. Possesses low friction, reduced cycle time, easy... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TC551 by DSM is a thermally conductive, flame retardant polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses low friction, reduced cycle time and... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TE200F6 by DSM is a heat stabilized, platable, polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Possesses high flow, low... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TE200F6-FC by DSM is a food contact, platable, heat stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. Offers superior heat resistance, design stiffness, wear, friction and... view more
Features
  • Filled Glass Fiber
  • Flow Good
  • Food contact approved
  • Heat Resistance High
  • ...
Stanyl® TE200F6-FC BK27024 by DSM is a 30% glass reinforced, heat stabilized, polyamide 46 grade. Stanyl® TE200F6-FC BK27024 can be processed by injection molding. It is a food contact quality... view more
Features
  • Filled
  • Food Contact Acceptable
  • Heat stabilized
Stanyl® TE200F8 by DSM is a heat stabilized, polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. Possesses high flow, low warpage, low... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TE200S6 by DSM is a low warpage, heat stabilized polyamide (PA 4-6) grade reinforced with 30% glass beads. Offers superior heat resistance, design stiffness, wear, friction and process flow... view more
Features
  • Filled
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TE248F6 by DSM is a lubricated, platable, UV stabilized, heat stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. Offers superior heat resistance, design stiffness, wear... view more
Features
  • Filled Glass Fiber
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TE250F3 by DSM is a heat stabilized, flame retardant, polyamide 4-6 (PA 4-6) grade reinforced with 15% glass fiber. It is suitable for processing by injection molding. Possesses high flow... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TE250F6 by DSM is a heat stabilized, flame retardant, polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Possesses high flow... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TE250F8 by DSM is a heat stabilized, flame retardant, polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. Possesses high flow... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TE250F9 by DSM is a heat stabilized, flame retardant, polyamide 4-6 (PA 4-6) grade reinforced with 45% glass fiber. It is suitable for processing by injection molding. Possesses high flow... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TE300 by DSM is a heat stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. Possesses high flow, low warpage, low friction, reduced cycle time, easy... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TE341 by DSM is a lubricated, heat stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. Possesses high flow, low warpage, low friction, reduced cycle... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TE351 by DSM is a heat stabilized, flame retardant polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. Possesses high flow, low warpage, low friction, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TE373 by DSM is a heat stabilized, wear and friction modified polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. Possesses high flow, low warpage, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TQ300 by DSM Engineering Plastics is a heat stabilized polyamide (PA 4-6) grade. Offers superior heat resistance, design stiffness, wear, friction and process flow qualities. It is suitable... view more
Features
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • Stiffness Good
  • ...
Stanyl Polyamide
Back to Top