OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
1 599 products match your search
Product Name
Supplier
Description
Fortron 1130L0 is a 30% glass-reinforced extrusion grade. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently flame-retardant. The high hardness and... view more
Fortron 1130L4 is a 30% glass-reinforced PPS that has excellent heat and chemical resistance. It is inherently flame-retardant and exhibits high hardness and a good balance of strength and... view more
FORTRON should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =For subsequent storage the... view more
Fortron 1140E7 is an inherently flame-retardant grade exhibiting extremely low flash and fast cycle times. It has excellent electrical properties, high hardness and stiffness. This grade exhibits... view more
Fortron 1140L0 is a 40% glass-reinforced extrusion grade. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently flame-retardant. The high hardness and... view more
CENTROTRON GF 15 PPS GF 15 is a polyphenylene sulphide (PPS) polymer reinforced with 15% glass-fibres leading to stiffness, increased resistance of the binding substance and an increased heat... view more
Features
  • Acid Resistant
  • Bondability
  • Chemical resistance Good
  • Dimensional stability Good
  • ...
CENTROTRON GF 40 PPS GF 40 is a black colored polyphenylene sulphide (PPS) polymer reinforced with 40% glass-fibres leading to additional stiffness, higher strength of the binding material and... view more
Features
  • Acid Resistant
  • Bondability
  • Chemical resistance Good
  • Dimensional stability Good
  • ...
Centroplast
CENTROTRON PPS is a black colored, semi-crystalline and high performance polyphenylene sulfide (PPS) grade. Provides high toughness, stiffness, hardness and exhibits abrasion-, oxidation-, acid... view more
Features
  • Abrasion resistance High
  • Acid Resistant
  • Bondability
  • Chemical resistance Good
  • ...
CENTROTRON is a plastic that is resistant to oxidation and hydrolysis which can be used in high temperature applications. CENTROTRON has a low sliding friction coefficient and high abrasion... view more
CENTROTRON is a plastic that is resistant to oxidation and hydrolysis which can be used at high operating temperatures. Applications include plug connectors, sensor housings and parts for... view more
Chengdu Letian Plastics
LTP 8160 by Chengdu Letian Plastics is a high performance polyolefin and polyphenylene sulfide (PPS), reinforced alloy. It exhibits high impact strength, high dimensional stability and low moisture... view more
Features
  • Dimensional stability Good
  • Filled
  • Impact resistance High
  • Moisture Absorption Low
Chengdu Letian Plastics
LTP 8180 by Chengdu Letian Plastics is a high performance polyolefin and polyphenylene sulfide (PPS), reinforced alloy. It exhibits high impact strength, high dimensional stability and low moisture... view more
Features
  • Dimensional stability Good
  • Filled
  • Impact resistance High
  • Moisture Absorption Low
Chengdu Letian Plastics
LTP 8255 by Chengdu Letian Plastics is a high flow, high performance polyphenylene sulfide (PPS), reinforced grade. It exhibits high impact strength, high dimensional stability and low moisture... view more
Features
  • Dimensional stability Good
  • Filled
  • Flow High
  • Impact resistance High
  • ...
Chengdu Letian Plastics
LTP 8275 by Chengdu Letian Plastics is a high flow, high performance polyphenylene sulfide (PPS), reinforced grade. It exhibits high impact strength, high dimensional stability and low moisture... view more
Features
  • Dimensional stability Good
  • Filled
  • Flow High
  • Impact resistance High
  • ...
Chengdu Letian Plastics
LTP CE-2202 by Chengdu Letian Plastics is a high performance, oil-proof, light weight polyphenylene sulfide (PPS) grade. It exhibits high temperature control precision, water resistance, good safety... view more
Features
  • Electrically Conductive
  • Density Low
  • Oil Resistant
  • Thermally Conductive
  • ...
DIC Corporation
AMORVON® W-30 by DIC Corporation is a black, low warp, low flash, modified polyphenylene sulphide [PPS] grade reinforced with 30% glass fiber. It exhibits excellent chemical resistance, heat... view more
Features
  • Chemical resistance Good
  • Crystalline Semi
  • Dimensional stability Good
  • Electrical Properties Good
  • ...
DIC Corporation
AMORVON® WL-30 by DIC Corporation is a black, wear resistant, low friction, modified polyphenylene sulphide [PPS] grade reinforced with glass fiber and polytetrafluroethylene. It exhibits excellent... view more
Features
  • Chemical resistance Good
  • Crystalline Semi
  • Dimensional stability Good
  • Electrical Properties Good
  • ...
DIC Corporation
CZ-1030 by DIC Corporation is a black, self-lubricating, wear resistant, low friction polyphenylene sulphide [PPS] grade reinforced with pitch-based carbon fiber. It exhibits excellent chemical... view more
Features
  • Chemical resistance Good
  • Crystalline Semi
  • Dimensional stability Good
  • Electrical Properties Good
  • ...
DIC Corporation
CZ-1130 by DIC Corporation is a black, self-lubricating, conductive, wear resistant, low friction polyphenylene sulphide [PPS] grade reinforced with 30% PAN-based carbon fiber. It exhibits excellent... view more
Features
  • Chemical resistance Good
  • Conductive
  • Crystalline Semi
  • Dimensional stability Good
  • ...
DIC Corporation
CZE-1200 by DIC Corporation is a black, electric conductive polyphenylene sulphide [PPS] grade reinforced with mineral and glass fiber. It exhibits excellent chemical resistance, heat resistance... view more
Features
  • Chemical resistance Good
  • Crystalline Semi
  • Dimensional stability Good
  • Electrical Properties Good
  • ...
PLASTRON® PPS-CF40-01 is a high performance polyphenylene sulfide (PPS) grade reinforced with 40 % long carbon fiber. Possesses high impact strength, rigidity and low warpage. Provides good dart... view more
Features
  • Creep Resistance Good
  • Filled Carbon fiber
  • Impact resistance High
  • Rigidity High
  • ...
PLASTRON® PPS-GF50-01 is a high performance polyphenylene sulfide (PPS) grade reinforced with 50 % long glass fiber. Possesses high impact strength, rigidity and low warpage. Provides good dart... view more
Features
  • Creep Resistance Good
  • Filled Glass Fiber
  • Impact resistance High
  • Rigidity High
  • ...
THERMEC™ S 4150R40 is a lubricated, 40% glass fiber filled polyphenylene sulfide (PPS) based material by Domo. Offers outstanding abrasion and wear resistance properties to improve tool life. It is... view more
Features
  • Abrasion resistance Good
  • Compressive Strength Good
  • Cost Effective
  • Creep Resistance Good
  • ...
THERMEC™ S 4150RC65 by Domo is a lubricated, 65% glass fiber and mineral filled polyphenylene sulfide (PPS) based material. It is a sintered carbon replacement for submersible pump thrust bearings... view more
Features
  • Abrasion resistance Good
  • Compressive Strength Good
  • Cost Effective
  • Creep Resistance Good
  • ...
THERMEC™ S 4160T1 is an impact modified, lubricated polyphenylene sulfide (PPS) based material by Domo. It is a sintered carbon replacement for submersible pump thrust bearings that are exposed to... view more
Features
  • Abrasion resistance Good
  • Compressive Strength Good
  • Cost Effective
  • Creep Resistance Good
  • ...
THERMEC™ S 4162T2 by Domo is a lubricated, impact modified polyphenylene sulfide (PPS) based material. Suitable for processing by injection molding and extrusion. It is a sintered carbon replacement... view more
Features
  • Abrasion resistance Good
  • Compressive Strength Good
  • Cost Effective
  • Creep Resistance Good
  • ...
THERMEC™ S 6250R40 by Domo is a lubricated polyphenylene sulfide (PPS) based material reinforced with 40% glass fiber. It is a sintered carbon replacement for submersible pump thrust bearings that... view more
Features
  • Abrasion resistance Good
  • Compressive Strength Good
  • Cost Effective
  • Creep Resistance Good
  • ...
Polyphenylene Sulfide Resin: High-performance engineering plastic SEPAZ PPS boasts excellent high-temperature resistance, flame retardancy and chemical resistance, physical strength, and its superb... view more
Polyphenylene Sulfide Resin: High-performance engineering plastic SEPAZ PPS boasts excellent high-temperature resistance, flame retardancy and chemical resistance, physical strength, and its superb... view more
Polyphenylene Sulfide Resin: High-performance engineering plastic SEPAZ PPS boasts excellent high-temperature resistance, flame retardancy and chemical resistance, physical strength, and its superb... view more
Polyphenylene Sulfide Resin: High-performance engineering plastic SEPAZ PPS boasts excellent high-temperature resistance, flame retardancy and chemical resistance, physical strength, and its superb... view more
Polyphenylene Sulfide Resin: High-performance engineering plastic SEPAZ PPS boasts excellent high-temperature resistance, flame retardancy and chemical resistance, physical strength, and its superb... view more
Ecomass Technologies
Ecomass® Compound 4150CO92 by Ecomass Technologies is a water insoluble, copper powder filled polyphenylene sulfide (PPS) grade. Exhibits slight odor, moderate specific gravity, good toughness and... view more
Features
  • Lead Content Low to None
  • Toxicity None
  • Filled
  • Rigidity Medium
  • ...
Ecomass Technologies
Ecomass® Compound 4150TU96 by Ecomass Technologies is a grey colored, water insoluble, tungsten powder filled polyphenylene sulfide (PPS) grade. Exhibits slight odor, high specific gravity, good... view more
Features
  • Toughness Good
  • Toxicity None
  • Lead Content Low to None
  • Rigidity Medium
  • ...
TECACOMP® PPS CF40 black 9736 by Ensinger is polyphenylsulfide (PPS) grade filled with carbon fiber. TECACOMP® PPS CF40 black 9736 can be processed using injection molding... view more
Features
  • Filled Carbon fiber
TECACOMP® PPS GF40 TF10 natural 3166 by Ensinger is polyphenylsulfide (PPS) grade. It is reinforced with glass fiber and PTFE (polytetrafluoroethylene). TECACOMP® PPS GF40 TF10 natural 3166 can be... view more
Features
  • Filled Glass Fiber
TECACOMP® PPS HTE black 4100 by Ensinger is graphite filled polyphenylsulfide (PPS) grade. It exhibits high electrical- and thermal conductivity. It can be processed using injection molding... view more
Features
  • Electrically Conductive
  • Filled
  • Thermally Conductive
TECACOMP® PPS HTE black 4101 by Ensinger is graphite filled polyphenylsulfide (PPS) grade. It possesses high electrical- and thermal conductivity. It can be processed using hot compression molding... view more
Features
  • Electrically Conductive
  • Filled
  • Thermally Conductive
TECACOMP® PPS PVX black 3803 by Ensinger is polyphenylsulfide (PPS) grade. It is filled with carbon fiber, graphite and PTFE (polytetrafluoroethylene). TECACOMP® PPS PVX black 3803 can be processed... view more
Features
  • Filled Carbon fiber
Eurostar Engineering Plastics
Star L PPS 30Y D51F is a polytetrafluoroethylene (PTFE) lubricated polyphenylene sulfide (PPS) reinforced with carbon fiber. Offers good impact performance, low coefficient of friction, low cost... view more
Features
  • Chemical resistance Good
  • Filled Carbon fiber
  • Friction Low
  • Heat Resistance Good
  • ...
Eurostar Engineering Plastics
Star L PPS D93F is a polytetrafluoroethylene (PTFE)/ aramid fiber lubricated polyphenylene sulfide (PPS). Offers good impact performance, low coefficient of friction, low cost, noise and vibration... view more
Features
  • Chemical resistance Good
  • Filled Carbon fiber
  • Friction Low
  • Heat Resistance Good
  • ...
Eurostar Engineering Plastics
Starglass OC004 is a polyphenylene sulfide (PPS) reinforced with 20% carbon fiber. Is suitable for processing by injection molding. Meets with the requirements of ISO 9001, ISO/ TS 16949:2009 and... view more
Features
  • Filled Carbon fiber
Formulated Polymers
FORMPOLY® PPSGF40 by Formulated Polymers is a heat stabilized polyphenylene sulphide (PPS) resin reinforced with 40% glass fiber. Is a flame retardant grade exhibiting high crystallinity, low odor... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
Formulated Polymers
FORMPOLY® PPSMF70 by Formulated Polymers is a heat stabilized polyphenylene sulphide (PPS) resin reinforced with 70% glass/mineral fiber. Is a flame retardant grade exhibiting high crystallinity... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
G.S.F. Plastics
GSF 1301 by G.S.F Plastics is a polyphenylene sulphide (PPS) grade reinforced with 40% glass fiber. GSF 1301 can be processed using injection molding... view more
Features
  • Filled Glass Fiber
G.S.F. Plastics
GSF 1307 by G.S.F Plastics is a polyphenylene sulphide (PPS) grade. GSF 1307 can be processed using injection molding... view more
GEHR PPS® is a semi-crystalline linear polyphenylene sulfide (PPS) grade by GEHR. Exhibits very high strength, rigidity, hardness, thermostability, creep strength and dimensional stability. Offers... view more
Features
  • Bondability
  • Chemical resistance Good
  • Crystalline Semi
  • Dimensional stability Good
  • ...
GEHR PPS-40GF® is a semi-crystalline linear polyphenylene sulfide (PPS) grade by GEHR, reinforced with 40% glass fiber. Exhibits very high strength, high stiffness, rigidity, hardness... view more
Features
  • Bondability
  • Chemical resistance Good
  • Crystalline Semi
  • Dimensional stability Good
  • ...
The linear polyphenylensulfide belongs to the semi-crystalline materials and offers a very high mechanical capacity, thermal and chemical resistance distinguished at the same time, high dimensional... view more
The linear polyphenylensulfide belongs to the semi-crystalline materials and offers a very high mechanical capacity, thermal and chemical resistance distinguished at the same time, high dimensional... view more
Information provided by Goodfellow... view more
Guangdong Shunde Shunyan New Material
PPS 1140 by Guangdong Shunde Shunyan New Material is a general purpose polyphenylene sulfide (PPS) grade reinforced with 40 % glass fiber. Is suitable for processing by injection molding. PPS 1140... view more
Features
  • Filled Glass Fiber
  • General purpose
Guangdong Shunde Shunyan New Material
PPS 1150 by Guangdong Shunde Shunyan New Material is a high strength polyphenylene sulfide (PPS) grade reinforced with 50 % glass fiber. Is suitable for processing by injection molding. PPS 1150 is... view more
Features
  • Filled Glass Fiber
  • Strength High
Guangdong Shunde Shunyan New Material
PPS 1155 by Guangdong Shunde Shunyan New Material is a general purpose polyphenylene sulfide (PPS) grade reinforced with 45 % glass fiber. Is suitable for processing by injection molding. PPS 1155... view more
Features
  • Filled Glass Fiber
  • General purpose
Guangdong Shunde Shunyan New Material
PPS 1165 by Guangdong Shunde Shunyan New Material is a polyphenylene sulfide (PPS) grade reinforced with 50 % glass fiber. Exhibits high dimensional stability. Is suitable for processing by... view more
Features
  • Dimensional stability Good
  • Filled Glass Fiber
Guangdong Shunde Shunyan New Material
PPS 1240 by Guangdong Shunde Shunyan New Material is a tough polyphenylene sulfide (PPS) grade reinforced with 40 % glass fiber. Is suitable for processing by injection molding. PPS 1240 is... view more
Features
  • Filled Glass Fiber
  • Toughness Good
Hippe
High hardness and stiffness, good abrasion resistance, low moisture absorption, favorable insulating features, low dielectric, high non-inflammability and high chemical resistance are the essential... view more
Hyundai EP
SUPEN® PB140 by Hyundai EP is a polyphenylene sulfide (PPS) grade reinforced with 40 % glass fiber. Exhibits high stiffness, excellent heat stability, chemical resistance, and good mechanical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Thermal Stability Good
  • Stiffness High
Hyundai EP
SUPEN® PB150 by Hyundai EP is a polyphenylene sulfide (PPS) grade reinforced with 50 % glass fiber. Exhibits high stiffness, excellent heat stability, chemical resistance, and good mechanical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Thermal Stability Good
  • Stiffness High
Hyundai EP
SUPEN® PB360G by Hyundai EP is a general purpose polyphenylene sulfide (PPS) grade reinforced with 65 % glass fiber and mineral filler. Exhibits excellent heat stability, chemical resistance, and... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Thermal Stability Good
  • Filled Mineral
Hyundai EP
SUPEN® PB520W by Hyundai EP is a polyphenylene sulfide (PPS) grade reinforced with 10 % carbon fiber. Exhibits high stiffness, good wear resistance, excellent heat stability, chemical resistance... view more
Features
  • Chemical resistance Good
  • Filled Carbon fiber
  • Thermal Stability Good
  • Stiffness High
  • ...
Initz (SK chemicals)
Ecotran 0302 by Initz is a semi-crystalline, halogen free polyphenylene sulphide (PPS)grade. It offers non-flammability, excellent chemical & solvent resistance, excellent dimensional stability... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Solvent Resistant
  • Warpage Low
  • ...
Initz (SK chemicals)
Ecotran 0502 by Initz is a semi-crystalline, halogen free polyphenylene sulphide (PPS) grade. It offers non-flammability, excellent chemical & solvent resistance, excellent dimensional stability... view more
Features
  • Dimensional stability Good
  • Stiffness High
  • Crystalline Semi
  • Chemical resistance Good
  • ...
Initz (SK chemicals)
Ecotran 0703 by Initz is a semi-crystalline, halogen free polyphenylene sulphide (PPS) grade. It offers non-flammability, excellent chemical & solvent resistance, excellent dimensional stability... view more
Features
  • Warpage Low
  • Solvent Resistant
  • Dimensional stability Good
  • Creep Resistance Good
  • ...
Initz (SK chemicals)
Ecotran 0704 by Initz is a semi-crystalline, halogen free polyphenylene sulphide (PPS) grade. It offers non-flammability, excellent chemical & solvent resistance, excellent dimensional stability... view more
Features
  • Creep Resistance Good
  • Tensile Strength High
  • Warpage Low
  • Chemical resistance Good
  • ...
Initz (SK chemicals)
Ecotran 1040G by Initz is a semi-crystalline, general purpose, halogen free, high performance polyphenylene sulphide (PPS) grade reinforced with 40% glass. It exhibits low flash, low off-gas and... view more
Features
  • Flow Good
  • Solvent Resistant
  • Warpage Low
  • Chemical resistance Good
  • ...
KINGFA® PPS-GF40 by Kingfa is polyphenylene sulfide (PPS) resin reinforced with 40% glass fiber. It exhibits high strength and high temperature. It is used in electric parts. KINGFA® PPS-GF40... view more
Features
  • Filled Glass Fiber
  • Strength High
KINGFA® PPS-GM45 by Kingfa is polyphenylene sulfide (PPS) resin reinforced with 45% glass and mineral fiber. It exhibits high strength and high temperature. It is used in electric parts. KINGFA®... view more
Features
  • Filled Glass Fiber
  • Filled Mineral
  • Strength High
KINGFA® PPS-GM50 by Kingfa is polyphenylene sulfide (PPS) resin reinforced with 50% glass and mineral fiber. It exhibits high strength and high temperature. It is used in electric parts. KINGFA®... view more
Features
  • Filled Glass Fiber
  • Filled Mineral
  • Strength High
KINGFA® PPS-GM55 is polyphenylene sulfide (PPS) resin reinforced with 55% glass and mineral fiber. It exhibits high strength and high temperature. It is used in electric parts. KINGFA® PPS-GM55... view more
Features
  • Filled Glass Fiber
  • Filled Mineral
  • Strength High
KINGFA® PPS-GM60 is a polyphenylene sulfide (PPS) resin reinforced with 60% glass and mineral fiber. Exhibits high strength and high temperature. Used in electric parts. Complies with UL... view more
Features
  • Filled Glass Fiber
  • Filled Mineral
  • Strength High
Kolon Plastics (Kolon Industries)
KOPPS® S13A65 by Kolon Plastics is a polyphenylene sulfide (PPS) linear resin reinforced with 65% glass fiber/mineral. It is one kind of SUPER Engineering Plastics beyond the performance of... view more
Features
  • Dimensional stability Good
  • Flame Resistance High
  • Flow High
  • Heat Resistance High
  • ...
Kolon Plastics (Kolon Industries)
KOPPS® S13G40 by Kolon Plastics is a polyphenylene sulfide (PPS) linear resin reinforced with 40% glass fiber. It is one kind of SUPER Engineering Plastics beyond the performance of engineering... view more
Features
  • Dimensional stability Good
  • Flame Resistance High
  • Flow High
  • Heat Resistance High
  • ...
Kolon Plastics (Kolon Industries)
KOPPS® S21A65 by Kolon Plastics is a polyphenylene sulfide (PPS) linear resin reinforced with 65% glass fiber/mineral. It is one kind of SUPER Engineering Plastics beyond the performance of... view more
Features
  • Dimensional stability Good
  • Flame Resistance High
  • Flow High
  • Heat Resistance High
  • ...
Kolon Plastics (Kolon Industries)
KOPPS® S25G40 by Kolon Plastics is a polyphenylene sulfide (PPS) cross-linked resin reinforced with 40% glass fiber. It is one kind of SUPER Engineering Plastics beyond the performance of... view more
Features
  • Dimensional stability Good
  • Flame Resistance High
  • Heat Resistance High
  • Strength High
  • ...
Kolon Plastics (Kolon Industries)
KOPPS® S25G40BL by Kolon Plastics (Kolon Industries) is a self-extinguishing, cross-linked polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. Exhibits high heat resistance, high... view more
Features
  • Crosslinkable
  • Dimensional stability Good
  • Extinguishing Self
  • Filled Glass Fiber
  • ...
Fitex 1340L by Kotec is a polyphenylene sulfide (PPS) grade, reinforced with 40% glass fiber. Complies with UL 94 V-0 Flame Rating... view more
Features
  • Filled Glass Fiber
Fitex 1340L30 by Kotec is a polyphenylene sulfide (PPS) grade, reinforced with 30% glass fiber. Complies with UL 94 V-0 Flame Rating... view more
Features
  • Filled Glass Fiber
LARTON CE/60 is a hardly inflammable polyphenylene Sulphide (PPS) based compound reinforced with 60% mineral filler. Provides very good chemical resistance, good thermal properties, stiffness, low... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Dimensional stability Good
  • Filled Mineral
  • ...
LARTON G/40 by LATI is hardly inflammable polyphenylene sulphide (PPS) based compound reinforced with 40% glass fiber. It provides very good chemical resistance, thermal properties, improved... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
LARTON G/40 I6 is a hardly inflammable polyphenylene Sulphide (PPS) based compound reinforced with 40% glass fiber. Provides very good elongation, chemical resistance, good thermal properties... view more
Features
  • Elongation High
  • Filled Glass Fiber
  • Toxicity Low
  • Chemical resistance Good
  • ...
LARTON GCE/600 is a hardly inflammable polyphenylene Sulphide (PPS) based compound reinforced with glass fiber and mineral filler. Provides very good chemical resistance, good thermal properties... view more
Features
  • Filled Glass Fiber
  • Filled Mineral
  • Toxicity Low
  • Chemical resistance Good
  • ...
LARTON GCE/650 is a hardly inflammable polyphenylene Sulphide (PPS) based compound reinforced with glass fiber and mineral filler. Provides very good chemical resistance, good thermal properties... view more
Features
  • Filled Glass Fiber
  • Filled Mineral
  • Toxicity Low
  • Chemical resistance Good
  • ...
LEIS Polytechnik
LEIS PPS CF 20 by Leis Polytechnik is a polyphenylensulfide (PPS) grade reinforced with 20 % carbon fiber... view more
Features
  • Filled Carbon fiber
LEIS Polytechnik
LEIS PPS CF 30 by Leis Polytechnik is a polyphenylensulfide (PPS) grade reinforced with 30 % carbon fiber... view more
Features
  • Filled Carbon fiber
LEIS Polytechnik
TRIBOFORCE® PPS C1800 by LEIS Polytechnik is a wear & friction modified, high-performance polyphenylene sulphide (PPS) grade reinforced with carbon fiber. Exhibits excellent dimensional stability... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Carbon fiber
  • Friction Low
  • ...
LG Chem
LUCON PN9008 by LG Chem is a thermally conductive polyphenylene sulfide (PPS) grade, reinforced with glass fiber and mineral and exhibits resistance to chemical and heat. Designed for injection... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat Resistance High
  • Filled Mineral
  • ...
LG Chem
LUCON PN9009 by LG Chem is a thermally conductive polyphenylene sulfide (PPS) grade, filled with mineral and exhibits resistance to chemical and heat. Designed for injection molding method. LUCON... view more
Features
  • Chemical resistance Good
  • Heat Resistance High
  • Filled Mineral
  • Thermally Conductive
LG Chem
LUSEP GP2400 by LG Chem is a general purpose polyphenylene sulfide (PPS) grade, reinforced with 40% glass fiber. Designed for injection molding method. LUSEP GP2400 is recommended for manufacturing... view more
Features
  • Filled Glass Fiber
  • General purpose
LG Chem
LUSEP GP4600 by LG Chem is a general purpose polyphenylene sulfide (PPS) grade, reinforced with 60% mineral and glass fiber. Designed for injection molding method. LUSEP GP4600 is recommended for... view more
Features
  • Filled Glass Fiber
  • General purpose
  • Filled Mineral
Injection Molding Grade, PPS+MF+GF, High Thermal Conductivity, Chemical Resistance, High Heat ResistanceApplication: Electrical or Electronic Parts (Heat sink, LED etc.), Motor HousingsCAS No... view more
LOTTE Advanced Materials
INFINO® XP-2130A by LOTTE Advanced Materials is a general purpose, scratch resistant polyphenylene sulfide (PPS) grade reinforced with 30 % glass fiber. Exhibits high modulus and good mechanical... view more
Features
  • Cost Effective
  • Filled Glass Fiber
  • General purpose
  • Modulus High
  • ...
LOTTE Advanced Materials
INFINO® XP-2140C by LOTTE Advanced Materials is a general purpose polyphenylene sulfide (PPS) grade reinforced with 40 % glass fiber. Exhibits high modulus and good mechanical strength. Offers... view more
Features
  • Cost Effective
  • Filled Glass Fiber
  • General purpose
  • Modulus High
  • ...
LOTTE Advanced Materials
INFINO® XP-2165MC by LOTTE Advanced Materials is a general purpose polyphenylene sulfide (PPS) grade reinforced with 65 % glass fiber and mineral filler. Exhibits high modulus and good mechanical... view more
Features
  • Filled Glass Fiber
  • General purpose
  • Filled Mineral
  • Modulus High
  • ...
Lehmann & Voss
LUVOCOM® 1301-0824 by Lehmann & Voss is a linear polyphenylene sulfide (PPS) with carbon fiber. It is non-flammable and exhibits high continuous-use and heat-distortion temperatures. It is suitable... view more
Features
  • Electrically Conductive
  • Filled Carbon fiber
  • Heat Deflection Temperature High
  • Stiffness High
  • ...
LUVOCOM® 1301-0824/F WWX-S by Lehmann & Voss is a non-flammable, linear polyphenylene sulfide (PPS) reinforced with carbon fiber. It exhibits high continuous-use and heat-distortion temperatures. It... view more
Features
  • Electrically Conductive
  • Filled Carbon fiber
  • Heat Deflection Temperature High
  • Stiffness High
  • ...
Lehmann & Voss
LUVOCOM® 1301-0825 by Lehmann & Voss is a non-flammable, electrically conductive, linear polyphenylene sulfide (PPS) reinforced with carbon fiber. It shows high continuous use and heat-distortion... view more
Features
  • Electrically Conductive
  • Filled Carbon fiber
  • Heat Deflection Temperature High
  • Stiffness High
  • ...
Lehmann & Voss
LUVOCOM® 1301-0915 by Lehmann & Voss is a linear, polyphenylene sulfide reinforced with PTFE and carbon fiber. It is an electrically conductive, lubricant modified and non-flammable grade. It... view more
Features
  • Electrically Conductive
  • Filled Carbon fiber
  • Heat Deflection Temperature High
  • Lubricated
  • ...
Lehmann & Voss
LUVOCOM® 1301-7399 by Lehmann & Voss is a non-flammable, linear polyphenylene sulfide (PPS) reinforced with glass fiber. It exhibits high continuous-use and heat-distortion temperatures. It is used... view more
Features
  • Filled Glass Fiber
  • Heat Deflection Temperature High
  • Stiffness Good
  • Strength Good
MOCOM Compounds
TEDUR® L 9105-1 by MOCOM Compounds is a polyphenylene sulphide (PPS) reinforced with 30% glass fiber. Exhibits high stiffness and high toughness. It can be processed using injection molding... view more
Features
  • Filled Glass Fiber
  • Stiffness High
  • Toughness Good
MOCOM Compounds
TEDUR® L 9105-1 S by MOCOM Compounds is a polyphenylene sulphide reinforced with 30% glass fiber. Exhibits high stiffness. It can be processed using injection molding... view more
Features
  • Filled Glass Fiber
  • Stiffness High
MOCOM Compounds
TEDUR® L 9107-1 by MOCOM Compounds is a polyphenylene sulphide reinforced with 40% glass fiber. Exhibits high toughness, reduced flash and increased burst strength. Can be processed using injection... view more
Features
  • Filled Glass Fiber
  • Toughness Good
MOCOM Compounds
TEDUR® L 9107-1 S by MOCOM Compounds is a polyphenylene sulphide reinforced with 40% glass fiber. Exhibits high toughness, reduced flash and increased burst strength. Can be processed using... view more
Features
  • Filled Glass Fiber
  • Toughness Good
MOCOM Compounds
TEDUR® L 9107-1 U by MOCOM Compounds is a polyphenylene sulphide (PPS) reinforced with 40% glass fiber. Exhibits high toughness, reduced flash and increased burst strength. Can be processed using... view more
Features
  • Filled Glass Fiber
  • Toughness Good
DSM
Back to Top