OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
3 669 products match your search
Product Name
Supplier
Description
TORELINA™ A604CX1B by Toray is a polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It offers flame retardancy, excellent electrical properties, excellent dimensional stability, high... view more
Features
  • Moldability Good
  • Filled Glass Fiber
  • Flame retarded
  • Dimensional stability Good
  • ...
TORAYCON® 1184G-A30 N1 by Toray is a flame retardant polybutylene terephthalate (PBT) grade reinforced with 30% glass fiber. Exhibits high toughness, superior dimensional stability, outstanding... view more
Features
  • Abrasion resistance High
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalinity High
  • ...
AMILAN® S133 by Toray is unreinforced PA6. It shows an excellent balance of properties in terms of mechanical behavior and superior toughness under standard humidity conditions. It has excellent... view more
Features
  • Abrasion resistance Good
  • Barrier Gas
  • Chemical resistance Good
  • Heat Resistance Good
  • ...
TORAYCON® 1184G-A15 by Toray is a flame retardant polybutylene terephthalate (PBT) grade reinforced with 30% glass fiber. Exhibits high toughness, crystallization rate, outstanding surface gloss and... view more
Features
  • Abrasion resistance High
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalinity High
  • ...
TORAYCON® 1401X04 by Toray is a highly tough polybutylene terephthalate (PBT) grade. Exhibits high crystallization rate, outstanding surface gloss, superior dimensional stability. Possesses low... view more
Features
  • Abrasion resistance High
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalinity High
  • ...
Pebax® Clear 1200 by Arkema is a bio-based polyether block amide (PEBA) grade. Offers high transparency level with excellent performance. Exhibits toughness & flexibility, flex fatigue resistance... view more
Features
  • Fatigue Resistant
  • Flexibility Good
  • Impact Resistance Good
  • Renewable Resource Content
  • ...
Pebax® Rnew® 55R53 SP 01 by Arkema is a bio-based polyether block amide (PEBA), made of flexible polyether and rigid polyamide based on renewable resources. It has been developed to be heat- and UV... view more
Features
  • Fatigue Resistant
  • Flexibility Good
  • Heat Resistance High
  • Impact Resistance Good
  • ...
Pebax® Rnew® 63R53 SP 01 by Arkema is a bio-based polyether block amide (PEBA) grade. It is made of flexible polyether and rigid polyamide based on renewable resources. Offers light stability, heat... view more
Features
  • Fatigue Resistant
  • Flexibility Good
  • Heat Resistance High
  • Impact Resistance Good
  • ...
Pebax® Rnew® 70R53 SP 01 by Arkema is a bio-based polyether block amide (PEBA), made of flexible polyether and rigid polyamide. It has been developed to be heat- and UV resistant. It is composed of... view more
Features
  • Density Low
  • Fatigue Resistant
  • Flexibility High
  • Heat Resistance High
  • ...
Pebax® Rnew® 72R53 SP 01 by Arkema is a bio-based polyether block amide grade, made of flexible polyether and rigid polyamide. It is composed of block copolymers consisting of a sequence of... view more
Features
  • Density Low
  • Fatigue Resistant
  • Flexibility Good
  • Heat Resistance High
  • ...
BASF 3D Printing Solutions
Adsint PA12 by BASF 3D Printing Solutions is a multi-purpose, polyamide 12 powder for laser sintering. Designed for prototypes and small series functional parts. It is processable on most common SLS... view more
Features
  • Ductile
  • Strength Good
  • Toughness Good
BASF 3D Printing Solutions
Ultracur3D® ST 45 by BASF 3D Printing Solutions is a reactive urethane photopolymer. It is a multipurpose resin with optimum toughness and processing speed. Suitable for high performance prototype... view more
Features
  • Surface finish excellent
  • Toughness Good
BASF 3D Printing Solutions
Ultracur3D® ST 45 B by BASF 3D Printing Solutions is a multipurpose, reactive urethane photopolymer. Possesses optimum toughness and processing speed. Offers impeccable quality of printed parts and... view more
Features
  • Surface finish excellent
  • Toughness Good
BASF 3D Printing Solutions
Ultracur3D® ST 45 M is a multipurpose, reactive urethane photopolymer by BASF 3D Printing Solutions. Offers impeccable quality of printed parts and increased production output rate. Suitable for... view more
Features
  • Surface finish excellent
  • Toughness Good
BASF 3D Printing Solutions
Ultrafuse ASA (Old Name: Innofil3D ASA) by BASF 3D Printing Solutions is acetonitrile styrene acrylate based filament for fused filament fabrication. It is a high performance thermoplastic with good... view more
Features
  • Chemical resistance High
  • Heat Resistance High
  • Rigidity High
  • Toughness Good
  • ...
Akulon® SG-KGS6/HV by DSM is a halogen free polyamide 66 grade reinforced with 30% glass fiber. It exhibits high flow and is red phosphorous-free. Offers UV resistance for better surface appearance... view more
Features
  • Electrical Properties Good
  • Filled Glass Fiber
  • Flow High
  • Halogen Free
  • ...
Akulon® Ultraflow K-FG12 by DSM is a high flow polyamide 6 grade reinforced with 60% glass fiber. Exhibits good mechanical properties (stiffness and toughness) and better surface appearance than... view more
Features
  • Filled Glass Fiber
  • Flow High
  • Mechanical Properties Good
  • Stiffness Good
  • ...
Akulon® Ultraflow K-FHG6/B by DSM is a high flow, heat stabilized polyamide 6 grade reinforced with 30% glass fiber. It exhibits improved processing, high mechanical properties (especially toughness... view more
Features
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
  • Mechanical Properties Good
  • ...
Akulon® Ultraflow K-FKG8 by DSM is a high flow, heat stabilized polyamide 6 grade reinforced with 40% glass fiber. Exhibits high temperature resistance, high mechanical properties, strength... view more
Features
  • Electrically Insulating
  • Filled Glass Fiber
  • Flow High
  • Heat stabilized
  • ...
Akulon® XG-FKGS6 by DSM is a halogen free flame retardant polyamide 6 grade reinforced with 30% glass fiber. Provides good electrical and thermal endurance. Exhibits UV resistance, better surface... view more
Features
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Toughness Good
  • UV Resistance Good
ExxonMobil Chemical
Exceed™ XP 8358ML by ExxonMobil Chemical is an extreme performance ethylene-1-hexene copolymer. It contains processing aid and thermal stabilizer. It does not contain antiblock and slip additives... view more
Features
  • Bubble Stability Good
  • Copolymer
  • Crack Resistance Good
  • Food contact approved
  • ...
ExxonMobil Chemical
Exceed™ XP 8656ML by ExxonMobil Chemical is extreme performance ethylene-1-hexene copolymer. It contains processing aid and thermal stabilizer. It does not contain antiblock and slip additives... view more
Features
  • Bubble Stability Good
  • Copolymer
  • Crack Resistance Good
  • Food contact approved
  • ...
ExxonMobil Chemical
Exceed™ XP 8784MK by ExxonMobil Chemical is an extreme performance ethylene-1-hexene copolymer. It contains antiblock (5000 ppm), slip (1000 ppm), processing aid and thermal stabilizer additives. It... view more
Features
  • Antiblocking
  • Copolymer
  • Food contact approved
  • Processability Good
  • ...
ExxonMobil Chemical
Exceed™ XP 8784ML by ExxonMobil Chemical is an extreme performance ethylene-1-hexene copolymer. It contains processing aid and thermal stabilizer additives. It does not contain antiblock and slip... view more
Features
  • Copolymer
  • Food contact approved
  • Processability Good
  • Non slippery
  • ...
ExxonMobil Chemical
Exceed™ XP 8784MP by ExxonMobil Chemical is an extreme performance ethylene-1-hexene copolymer. It does not contain antiblock and slip additives. It contains processing aid and thermal stabilizer... view more
Features
  • Copolymer
  • Food contact approved
  • Processability Good
  • Non slippery
  • ...
RTP Company
RTP 199 X 139120 by RTP Company is polypropylene (PP) grade filled with 20% talc. Provides excellent tensile & flexural strength, overall toughness as well as impact and heat resistance. Suitable... view more
Features
  • Cost Effective
  • Dimensional stability Good
  • Filled Talc
  • Heat Resistance High
  • ...
RTP Company
RTP 199 X 139140 by RTP Company is 40% talc filled polypropylene (PP) grade. Suitable for processing by injection molding. Offers improvements in dimensional stability and stiffness. Provides... view more
Features
  • Cost Effective
  • Dimensional stability Good
  • Filled Talc
  • Heat Resistance High
  • ...
Accura® ABS Black (SL 7820) is a rigid and tough acrylonitrile butadiene styrene (ABS) grade. Is an accurate and durable grade designed for use on solid state SLA® platforms to build automotive... view more
Features
  • Rigidity Medium
  • Toughness Good
  • Durable
Accura® ABS White (SL 7810) is a rigid and tough acrylonitrile butadiene styrene (ABS) grade. Exhibits high quality, good dimensional stability & simulates and replace CNC-machined ABS articles... view more
Features
  • Toughness Good
  • Dimensional stability Good
  • Rigidity Medium
DuraForm® EX Plastic is a polypropylene and acrylonitrile butadiene atyrene (PP/ABS) alloy. Available in natural and black color. Possesses outstanding toughness, repeatable mechanical properties &... view more
Features
  • Impact resistance High
  • Toughness Good
  • Tear Strength Good
  • Processability Good
3D Systems
VisiJet® M3-X is a white colored acrylonitrile butadiene styrene (ABS) grade. Is suitable for processing by injection molding. Exhibits white finish, extreme toughness and high temperature... view more
Features
  • Toughness Good
  • Heat Resistance High
VisiJet® SL Impact is a white opaque colored, UV curable polypropylene and acrylonitrile butadiene styrene (PP/ABS) alloy. Possesses good toughness & and exhibits SD, HD, MP projet compatibility and... view more
Features
  • Toughness Good
  • Durable
4MID® 9A24400 UV by 4Plas is a semi-crystalline, UV stabilized, super tough polyamide 66 (PA 66) grade. It is insoluble in water and exhibits excellent stiffness, high mechanical strength, very good... view more
Features
  • Crystalline Semi
  • Electrical Properties Good
  • Thermal Stability Good
  • Toughness Good
4MID® 23I00000 by 4Plas is a semi-crystalline, polyoxymethylene (POM) grade. It is insoluble in water and exhibits excellent stiffness, excellent hardness, good mechanical strength, very good... view more
Features
  • Surface Finish Good
  • Fatigue Resistant
  • Toughness Good
  • Moisture Absorption Low
  • ...
4MID® 9I11230 H by 4Plas is a semi-crystalline, heat stabilized polyoxymethylene (POM) grade reinforced with 30 % barium sulphate. It is insoluble in water and exhibits excellent stiffness... view more
Features
  • Toughness Good
  • Processability Good
  • Friction Low
  • Creep Resistance Good
  • ...
4MID® 9I15120 by 4Plas is a semi-crystalline, lubricated polyoxymethylene (POM) grade reinforced with 20 % polytetrafluoroethylene (PTFE). It is insoluble in water and exhibits excellent stiffness... view more
Features
  • Abrasion resistance High
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalline Semi
  • ...
A. Schulman (LyondellBasell)
ASI POLYETHYLENE CP 808-01 Natural by A. Schulman is a natural colored, medium gloss, food contact acceptable, linear low density polyethylene (LLDPE) grade. Shows high impact resistance, high... view more
Features
  • Density Low
  • ESCR High Stress Crack Resist
  • Flexibility Good
  • Food Contact Acceptable
  • ...
A. Schulman (LyondellBasell)
ASI POLYETHYLENE CP 878-01 Natural is a natural colored linear low density polyethylene (LLDPE) grade. Exhibits good stiffness, high tensile strength, good drwadown capability, good toughness and... view more
Features
  • Toughness Good
  • Gloss Medium
  • Drawdown Good
  • Tensile Strength High
  • ...
A. Schulman (LyondellBasell)
ASI POLYETHYLENE LP 552-01 by A. Schulman is a food contact acceptable, high density polyethylene (HDPE) copolymer grade. Shows low temperature impact resistance, narrow molecular weight... view more
Features
  • Density High
  • ESCR High Stress Crack Resist
  • Food Contact Acceptable
  • Toughness Good
A. Schulman (LyondellBasell)
ASI POLYETHYLENE LP 554-01 by A. Schulman is a food contact acceptable, high density polyethylene (HDPE) homopolymer grade. Shows narrow molecular weight distribution, high rigidity, good toughness... view more
Features
  • Density High
  • Food Contact Acceptable
  • Homopolymer
  • Rigidity High
  • ...
A. Schulman (LyondellBasell)
ASI POLYPROPYLENE 3515 by A. Schulman is a polypropylene (PP) copolymer grade. Shows high flow, good colorability, good moldability, good stiffness, good toughness and medium impact resistance. ASI... view more
Features
  • Colorability Good
  • Moldability Good
  • Toughness Good
Fluon® ETFE AH-700 by AGC is a non-conductive ethylene tetrafluoroethylene (ETFE) grade. Offers good chemical resistance, permeation resistance, lower melting properties, good processability... view more
Features
  • ESCR High Stress Crack Resist
  • Heat Resistance Good
  • Barrier Good
  • Chemical resistance Good
  • ...
Fluon® ETFE AH-700C by AGC is a conductive ethylene tetrafluoroethylene (ETFE) grade. Offers good chemical resistance, permeation resistance, protection against static build-up, lower melting... view more
Features
  • Toughness Good
  • Heat Resistance Good
  • Conductive
  • Barrier Good
  • ...
Fluon® ETFE AH-800 by AGC is a non-conductive ethylene tetrafluoroethylene (ETFE) grade. Offers good chemical resistance, permeation resistance, lower melting properties, good processability... view more
Features
  • Processability Good
  • ESCR High Stress Crack Resist
  • Toughness Good
  • Heat Resistance Good
  • ...
Fluon® ETFE AH-800C by AGC is a conductive ethylene tetrafluoroethylene (ETFE) grade. Offers good chemical resistance, permeation resistance, protection against static build-up, lower melting... view more
Features
  • Chemical resistance Good
  • Antistatic
  • Heat Resistance Good
  • Conductive
  • ...
Fluon® LM-720A by AGC is a general purpose, modified ethylene tetrafluoroethylene (ETFE) grade. Exhibits low melting point, excellent chemical resistance, good thermal stability, improved optical... view more
Features
  • Electrical Properties Good
  • Smoke Emission Low
  • Thermal Stability Good
  • Clarity High
  • ...
ALTUGLAS INTERNATIONAL (Arkema Group)
PLEXIGLAS® DRM2-101 by ALTUGLAS INTERNATIONAL (Arkema Group) is an impact modified, polymethyl methacrylate acrylic (PMMA) resin. It exhibits matte finish, toughness and outstanding UV resistance... view more
Features
  • Heat Resistance Good
  • Impact modified
  • Processability Good
  • Toughness Good
  • ...
ALTUGLAS INTERNATIONAL (Arkema Group)
PLEXIGLAS® M17 by ALTUGLAS INTERNATIONAL (Arkema Group) is an impact modified, polymethyl methacrylate acrylic (PMMA) resin. It exhibits high melt flow, excellent optical properties and outstanding... view more
Features
  • Flow High
  • Heat Resistance Good
  • Impact modified
  • Impact Resistance Good
  • ...
ALTUGLAS INTERNATIONAL (Arkema Group)
PLEXIGLAS® M17T by ALTUGLAS INTERNATIONAL (Arkema Group) is an impact modified, polymethyl methacrylate acrylic (PMMA) resin. It provides 7 times the impact resistance of standard acrylics. This... view more
Features
  • Flow High
  • Heat Resistance Good
  • Impact modified
  • Impact Resistance Good
  • ...
ALTUGLAS INTERNATIONAL (Arkema Group)
PLEXIGLAS® MI7C-56503RB by ALTUGLAS INTERNATIONAL (Arkema Group) is an impact modified, jet black, polymethyl methacrylate acrylic (PMMA) resin. It possesses high heat resistance, high melt flow and... view more
Features
  • Flow High
  • Gloss High
  • Heat Resistance High
  • Impact modified
  • ...
ALTUGLAS INTERNATIONAL (Arkema Group)
PLEXIGLAS® V052i by ALTUGLAS INTERNATIONAL (Arkema Group) is a light impact modified, polymethyl methacrylate acrylic (PPMA) resin. Exhibits toughness, improved fabrication, good melt flow, good... view more
Features
  • Heat Resistance Good
  • Mold Release Good
  • Chemical resistance Good
  • Impact modified
  • ...
Abhar Polymer Compounds
APPOL01 by Abhar Polymer Compounds is a corrosion resistant, high density polyethylene thermoplastic grade. It contains an antioxidant to obtain excellent long term properties and well dispersed... view more
Features
  • Corrosion Resistance Good
  • Density High
  • ESCR High Stress Crack Resist
  • Mechanical Properties Excellent
  • ...
Abhar Polymer Compounds
APXLP12 by Abhar Polymer Compounds is a silane crosslinkable polyethylene (XLPE) thermoplastic grade. It exhibits excellent strength, good toughness and good mechanical properties. It provides... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Heat Resistance Good
  • Mechanical Properties Excellent
  • ...
Abhar Polymer Compounds
APXLP12BC by Abhar Polymer Compounds is a silane crosslinkable pre-grafted polyethylene (XLPE) thermoplastic grade. It contains 2.5% well dispersed carbon black to ensure excellent weathering... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Heat Resistance Good
  • Strength Good
  • ...
Abhar Polymer Compounds
APXLP13 by Abhar Polymer Compounds is a silane crosslinkable pre-grafted polyethylene (XLPE) thermoplastic grade. It exhibits excellent electrical properties, excellent strength and good toughness... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Heat Resistance Good
  • ...
Adaptive3D Technologies
Soft ToughRubber™ is a tough, 3D printable photopolymer. It combines the feel and mechanical properties of silicone with the resolution and surface finish that Digital Light Processing® (DLP)... view more
Features
  • Toughness Good
Aditya Birla Chemicals – Advanced Materials
EPOTEC® YD 904 by Aditya Birla Chemicals is a medium molecular weight solid epoxy resin, based on bisphenol-A. Offers standard viscosity, high flexibility and toughness. It produces epoxy esters by... view more
Features
  • Flexibility High
  • Molecular Wt Medium
  • Toughness Good
  • Viscosity Medium
Aditya Birla Chemicals – Advanced Materials
EPOTEC® YD 905 by Aditya Birla Chemicals is a medium molecular weight solid epoxy resin, based on bisphenol-A. Offers standard viscosity, high flexibility and toughness. It produces epoxy esters by... view more
Features
  • Flexibility High
  • Molecular Wt Medium
  • Toughness Good
  • Viscosity Medium
Aditya Birla Chemicals – Advanced Materials
EPOTEC® YDFM 253 by Aditya Birla Chemicals is a blend of diglycidyl ether of bisphenol-A epoxy resin, diglycidyl ether of bisphenol-F liquid epoxy resin and monofunctional reactive diluent. Offers... view more
Features
  • Flexibility Good
  • Toughness Good
  • Viscosity Low
  • Wettability
AdvanSix
Aegis® H100MP is a lubricated, medium viscosity, nucleated nylon 6 homopolymer grade. Possesses good strength, toughness and thermoforming properties. Exhibits high heat-, chemical and abrasion... view more
Features
  • Toughness Good
  • Strength Good
  • Heat Resistance High
  • Abrasion resistance High
  • ...
AdvanSix
Aegis® H100NP is a medium viscosity nylon 6 homopolymer grade. Possesses good strength, toughness and thermoforming properties. Exhibits high heat-, chemical and abrasion resistance. Offers tear and... view more
Features
  • Chemical resistance Good
  • Viscosity Medium
  • Abrasion resistance High
  • Toughness Good
  • ...
AdvanSix
Aegis® H100QP is a lubricated, medium viscosity nylon 6 homopolymer grade. Possesses good strength, toughness and thermoforming properties. Exhibits high heat-, chemical and abrasion resistance... view more
Features
  • Viscosity Medium
  • Toughness Good
  • Abrasion resistance High
  • Homopolymer
  • ...
AdvanSix
Aegis® H120MP is a lubricated, high viscosity, nucleated nylon 6 homopolymer grade. Possesses good strength, toughness and thermoforming properties. Exhibits high heat-, chemical and abrasion... view more
Features
  • Toughness Good
  • Viscosity High
  • Homopolymer
  • Heat Resistance High
  • ...
AdvanSix
Aegis® H135MP is a lubricated, high viscosity, nucleated nylon 6 homopolymer grade. Possesses good strength, toughness and thermoforming properties. Exhibits high heat-, chemical and abrasion... view more
Features
  • Homopolymer
  • Lubricated
  • Strength Good
  • Heat Resistance High
  • ...
Advanced Laser Materials (ALM)
ALM TPE 210-S is a water-insoluble, flexible, 100% recyclable nylon thermoplastic elastomer (TPE) grade. It is a white colored powder. Produces parts with “rubber like” qualities. Exhibits good... view more
Features
  • Toughness Good
  • Recyclable
  • Abrasion resistance Good
Akay Plastik
AKBONAT® P-30GFN01 by Akay Plastik is a polycarbonate (PC) grade, reinforced with 20% glass fiber and 10% glass bead. Exhibits glossy finish, very good surface appearance, good dimensional... view more
Features
  • Appearance Pleasing Surface
  • Dimensional stability Good
  • Filled Glass Fiber
  • Friction Low
  • ...
Akay Plastik
AKLAMID® AN-0000N02 by Akay Plastik is a blend of polyamide 6 (PA 6) and acrylonitrile butadiene styrene (ABS) reinforced with 20% glass fiber. Possesses improved mechanical, physical and thermal... view more
Features
  • Chemical resistance Good
  • Friction Low
  • Stiffness Good
  • Fatigue Resistant
  • ...
Akay Plastik
AKLAMID® AN-30GFN01 by Akay Plastik is a blend of polyamide 6 (PA 6) and acrylonitrile butadiene styrene (ABS) reinforced with 30% glass fiber. Possesses improved mechanical, physical and thermal... view more
Features
  • Thermal Stability Good
  • Filled Glass Fiber
  • Chemical resistance Good
  • Wear resistance Good
  • ...
Akay Plastik
AKLAMID® N-0000N01 by Akay Plastik is a natural colored polyamide 6 (PA 6) grade. Possesses improved mechanical, physical and thermal properties. Provides good stiffness/ toughness balance, low... view more
Features
  • Friction Low
  • Fatigue Resistant
  • Strength Good
  • Thermal Stability Good
  • ...
AKLAMID® N-10GFN01V2 by Akay Plastik is a flame retardant, halogenenated polyamide 6 grade reinforced with 10% glass fiber. Possesses improved mechanical, physical and thermal properties. Provides... view more
Features
  • Thermal Stability Good
  • Fatigue Resistant
  • Strength Good
  • Friction Low
  • ...
ALTECH® PP-H A 2030/159 GF30 CP is a chemically coupled, high heat stabilized polypropylene (PP) homopolymer grade reinforced with 30% glass fiber. Possesses high stiffness & toughness, good... view more
Features
  • Soft
  • Stiffness High
  • Heat stabilized
  • Filled Glass Fiber
  • ...
ALTECH® PP-H A 2040/159 GF40 CP is a chemically coupled polypropylene (PP) homopolymer grade reinforced with 40% glass fiber. Possesses high stiffness & toughness, good physical, color & thermal... view more
Features
  • Chemically Coupled
  • Soft
  • Filled Glass Fiber
  • Toughness Good
  • ...
ALTECH® PP-R A 1000/312 IM UV is a heat aging & U.V. stabilized polypropylene (PP) random copolymer grade. Possesses high toughness, good physical, color & thermal properties and soft feel. Is... view more
Features
  • Copolymer
  • Toughness Good
  • UV Stabilized
  • Heat Aging Resistance Good
  • ...
ATLAC® PREMIUM 600 by Aliancys is a thixotropic, highly reactive, styrene free, medium viscosity vinyl ester resin dissolved in methacrylate. It can be cured by curing agents including Perkadox 16... view more
Features
  • Solvent Resistant
  • Strength Good
  • Toughness Good
Allied PhotoPolymers
KZ-1860-CL is a tough, clear or slight green tint colored acrylonitrile butadiene styrene (ABS) like resin for 355 nm Solid State Laser Systems. Offers quality finish, fast build, low viscosity... view more
Features
  • Strength Good
  • Thermal Stability Good
  • Toughness Good
  • Viscosity Low
Allied PhotoPolymers
KZ-1862-ICE is a tough, clear acrylonitrile butadiene styrene (ABS) like resin for 355 nm Solid State Laser Systems. Offers quality finish, fast build, low viscosity, excellent re-wetting and... view more
Features
  • Strength Good
  • Thermal Stability Good
  • Toughness Good
  • Viscosity Low
Allied PhotoPolymers
KZ-1870-WH is a tough, white or ivory colored acrylonitrile butadiene styrene (ABS) like resin for 355 nm Solid State Laser Systems. Offers quality finish, fast build, low viscosity, excellent... view more
Features
  • Strength Good
  • Thermal Stability Good
  • Toughness Good
  • Viscosity Low
AmSty
EA3400 is a crystal polystyrene (PS) grade. Possesses excellent clarity, color, good toughness and less than 300 parts per million residual volatiles with minimal taste and odor transfer... view more
Features
  • Odor Transfer Low
  • Clarity High
  • Toughness Good
  • Colorability Good
  • ...
AmSty
EB6755 is a high impact polystyrene (HIPS) grade. Provides balanced toughness, excellent dimensional stability, gloss, processing ability, good low temperature impact and exhibits good environmental... view more
Features
  • Processability Good
  • ESCR High Stress Crack Resist
  • Dimensional stability Good
  • Impact Resistance Low Temp
  • ...
AmSty
EC6600 is a high impact polystyrene (HIPS) grade. Provides balanced toughness, excellent dimensional stability, gloss, processing ability, excellent printability, high heat distortion temperature... view more
Features
  • Processability Good
  • Toughness Good
  • Toughness Low Temperature
  • Dimensional stability Good
  • ...
AmSty
MB3150 is a high heat crystal polystyrene (PS) grade. Offers high vicat softening temperature, excellent clarity with slight blue tint, good toughness, fast cycling due to high heat distortion... view more
Features
  • Toughness Good
  • Food contact approved
  • Gloss High
  • Cycle Time Short
  • ...
STYRON A-TECH® 1115 is a high impact polystyrene (HIPS) grade. Provides better color consistency, the ability to down-gauge and improved wall thickness distribution. Offers excellent dimensional... view more
Features
  • Food contact approved
  • Gloss High
  • Toughness Good
  • Processability Good
  • ...
Mitsui Chemicals
Back to Top