OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
99 products match your search
Product Name
Supplier
Description
Stanyl® 46HF4130 by DSM is a heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It possesses high flow & toughness, low... view more
Features
  • Abrasion resistance Good
  • Cost Effective
  • Cycle Time Short
  • Filled Glass Fiber
  • ...
Stanyl® 46HF4530 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber for electronics & electrical applications. It is suitable for processing... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® 46HF4550 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 50% glass fiber for electronics & electrical applications. It is suitable for processing... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® 46HF5040 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It provides unmatched... view more
Features
  • Chemical resistance High
  • Cost Effective
  • Filled Glass Fiber
  • Flame retarded
  • ...
Stanyl® 46HF5050 by DSM is a high-performance, heat stabilized, flame-retardant polyamide 4-6 (PA 4-6) grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® 46SF5030 by DSM is a high-performance, heat stabilized, flame-retardant polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® CR310 by DSM is a high-performance, heat stabilized, flame-retardant polyamide 4-6 (PA 4-6) reinforced with 30% glass fiber. It is a halogen- and red phosphorous-free grade. It is suitable... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Flow High
  • ...
Stanyl® Diablo HDT2700 by DSM is a high-performance, heat stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It offers superior heat resistance, design stiffness, wear & friction... view more
Features
  • Chemical resistance Good
  • Creep Resistance High
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® Diablo OCD2100 BK27021 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It... view more
Features
  • Abrasion resistance Good
  • Cost Effective
  • Creep Resistance Good
  • Fatigue Resistant
  • ...
Stanyl® Diablo OCD2300 BLK by DSM is a high-performance, heat stabilized polyamide (PA 4-6) grade reinforced with 50% glass fiber. It offers superior heat resistance, design stiffness, wear &... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Creep Resistance Good
  • Fatigue Resistant
  • ...
Stanyl® Diablo OCD2305 BM by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with glass fiber. It is suitable for processing by injection blow molding. It offers... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Filled Glass Fiber
  • Heat Resistance High
  • ...
Stanyl® HFX31S by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 20% glass fiber. It provides high mechanical properties and an... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX31SW by DSM is a flame retarded, polyamide 46 grade. It is reinforced with 20% glass. It is halogen- & red phosphorous-free grade. Stanyl® HFX31SW can be processed by injection molding... view more
Features
  • Chemical resistance Good
  • Filled
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX31SW WT94001 by DSM is a flame retarded, polyamide 46 grade. It is reinforced with 20% glass. It exhibits high flow and chemical resistance. It is halogen- & red phosphorous-free grade... view more
Features
  • Chemical resistance Good
  • Filled
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX33S by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 20% glass fiber. It provides high mechanical properties and an... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX50S by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 30% glass fiber. It retains its mechanical properties at high... view more
Features
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® HFX61S by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 35% glass fiber. It provides high mechanical properties and an... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX63S by DSM is a flame retarded, polyamide 46 grade. It is reinforced with 35% glass. It is halogen- & red phosphorous-free grade. Stanyl® HFX63S can be processed by injection molding. It... view more
Features
  • Chemical resistance Good
  • Filled
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX82S by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 45% glass fiber. It provides high mechanical properties and an... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® HGR1 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, superior heat- & chemical resistance, design stiffness, wear & friction... view more
Features
  • Chemical resistance Good
  • Flow High
  • Friction High
  • Heat Resistance High
  • ...
Stanyl® HGR2 BK00001 by DSM is a high-performance, non-reinforced, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, superior heat- & chemical resistance, abrasion... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Cost Effective
  • Friction Low
  • ...
Stanyl® HGR3-W (P1120D) by DSM is a heat stabilized, wear and friction modified, high-performance polyamide 46 grade. It is a bio-based, mass balanced grade with good chemical resistance. Designed... view more
Features
  • Chemical resistance Good
  • Heat stabilized
Stanyl® MC50 by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 35% glass fiber. It provides high mechanical properties, superior... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • ...
Stanyl® MC51 by DSM is a high-performance, good or high-flow, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 35% glass fiber. It provides high mechanical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Flow High
  • ...
Stanyl® TC153 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade. It exhibits thermally conductivity and flame retardant characteristics. It provides high mechanical... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TC154 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade. It exhibits thermally conductivity and flame retardant characteristics. It provides high mechanical... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TC155 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade. It exhibits thermally conductivity and flame retardant characteristics. It provides high mechanical... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Flow High
  • Heat stabilized
  • ...
Stanyl® TC168 (NC239B) by DSM is a high-performance, thermally conductive, heat stabilized, flame retardant polyamide (PA 4-6) grade reinforced with 20% glass fiber. It offers chemical resistance... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Heat Resistance High
  • ...
Stanyl® TC170 (P823C) by DSM is a laser markable, thermal conductive, polyamide 46. It is reinforced with 20% glass. Stanyl® TC170 (P823C) can be processed by injection molding. It shows chemical... view more
Features
  • Chemical resistance Good
  • Filled
  • Laser Markable
Stanyl® TC502 by DSM is a high-performance, thermally conductive polyamide 4-6 (PA 4-6) grade. It provides high mechanical properties, superior heat- & chemical resistance, design stiffness, wear &... view more
Features
  • Chemical resistance Good
  • Flow High
  • Heat Resistance High
  • Stiffness High
  • ...
Stanyl® TC551 by DSM is a high-performance polyamide 4-6 (PA 4-6) grade. It exhibits thermally conductivity and flame retardant characteristics. It provides high mechanical properties, superior... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TE200F6 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TE200F6-FC by DSM is a food contact quality, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, heat- &... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow Good
  • Food Contact Acceptable
  • ...
Stanyl® TE200F6-FC BK27024 by DSM is a 30% glass reinforced, heat stabilized, polyamide 46 grade. Stanyl® TE200F6-FC BK27024 can be processed by injection molding. It is a food contact quality... view more
Features
  • Filled
  • Food Contact Acceptable
  • Heat stabilized
Stanyl® TE200F8 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It provides high mechanical properties, heat- & chemical resistance, design... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TE200S6 by DSM is low warpage, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass beads. It provides high mechanical properties, heat- & chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Bead
  • Flow Good
  • Heat Resistance High
  • ...
Stanyl® TE248F6 by DSM is a high-performance, heat- & UV-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It is stable to weather and provides high mechanical properties, heat- &... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow Good
  • Heat Resistance High
  • ...
Stanyl® TE250F3 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 15% glass fiber. It provides high mechanical properties, strength, ductility... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Ductile
  • Fatigue Resistant
  • ...
Stanyl® TE250F6 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TE250F8 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It provides high mechanical properties, heat- & chemical... view more
Features
  • Chemical resistance High
  • Cost Effective
  • Creep Resistance Good
  • Filled Glass Fiber
  • ...
Stanyl® TE250F9 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 45% glass fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Cost Effective
  • Creep Resistance Good
  • Electrical Properties Good
  • ...
Stanyl® TE300 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear & friction and... view more
Features
  • Chemical resistance High
  • Flow High
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TE341 by DSM is a lubricated, high-performance, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Flow High
  • Grease Resistant
  • Heat Resistance High
  • ...
Stanyl® TE351 by DSM is a is a high-performance, heat-stabilized, flame-retardant polyamide (PA 4-6) grade. It provides high mechanical properties, heat- & chemical resistance, design stiffness... view more
Features
  • Chemical resistance High
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TE373 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, strength, design stiffness and process flow qualities. It is a... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TQ300 by DSM is a heat stabilized polyamide (PA 4-6) grade. Offers superior heat resistance, design stiffness, wear, friction and process flow qualities. It is suitable for processing by... view more
Features
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • Stiffness Good
  • ...
Stanyl® TQ300F5 by DSM is a heat stabilized polyamide (PA 4-6) grade reinforced with 25% glass fiber. It offers superior heat resistance, design stiffness, wear, friction and process flow qualities... view more
Features
  • Filled Glass Fiber
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TS200B3 by DSM is a polyamide 4-6 (PA 4-6) grade reinforced with 15% carbon fiber. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear & friction and... view more
Features
  • Chemical resistance High
  • Filled Carbon fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TS200F10 by DSM is a high-performance polyamide (PA 4-6) grade reinforced with 50% glass fiber. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TS200F6 by DSM is a high-performance polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TS200F6 B-MB by DSM is a high-performance, bio-based polyamide 4-6 (PA 4-6) reinforced with 30% glass fiber. It provides superior heat resistance, design stiffness, wear & friction and... view more
Features
  • Filled Glass Fiber
  • Flow Good
  • Heat Resistance High
  • Stiffness Good
Stanyl® TS241B3 by DSM is a polyamide 4-6 (PA 4-6) grade reinforced with 15% carbon fiber. It is suitable for processing by injection molding. It possesses high flow & toughness, low warpage &... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Cycle Time Short
  • Electrical Properties Good
  • ...
Stanyl® TS250F4D by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 20% glass fiber. It provides high mechanical properties, heat- & chemical... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® TS250F6D by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TS250F8 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It provides heat- & chemical resistance, design stiffness... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® TS250FK33 by DSM is a flame-retarded, low warpage, polyamide 4-6 (PA 4-6) grade, reinforced with 30% glass and mineral fiber. It is suitable for processing by injection molding. It provides... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled Mineral
  • Flame retarded
  • ...
Stanyl® TS271A1 by DSM is a high-performance, aramid-reinforced, wear- & friction-modified high heat polyamide that offers extremely low abrasion for gear & bushing applications. It provides high... view more
Features
  • Chemical resistance High
  • Filled Aramid Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TS271P4 by DSM is a high-performance polyamide 4-6 (PA 4-6) grade reinforced with 20% whiskers. It is suitable for processing by injection molding. It provides high mechanical properties... view more
Features
  • Chemical resistance High
  • Filled
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TS272A1 by DSM is a high-performance, aramid-reinforced, wear- & friction-modified high heat polyamide that offers extremely low abrasion for gear & bushing applications. It provides high... view more
Features
  • Chemical resistance High
  • Filled Aramid Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TS300 by DSM is a high-performance, non-reinforced polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance High
  • Flow High
  • Heat Resistance High
  • Stiffness High
  • ...
Stanyl® TS341 by DSM is a high-performance, non-reinforced polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It provides high mechanical properties, heat- & chemical... view more
Features
  • Chemical resistance High
  • Flow High
  • Heat Resistance High
  • Stiffness High
  • ...
Stanyl® TS341-N by DSM is a polyamide 46 grade. It can be processed by injection molding. Stanyl® TS341-N shows chemical resistance... view more
Features
  • Chemical resistance Good
Stanyl® TS350 by DSM is an unreinforced, heat-stabilized, flame-retardant, high-performance polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It provides high... view more
Features
  • Chemical resistance High
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TW200B6 by DSM is a high-performance, heat-stabilized, lubricated polyamide (PA 4-6) grade reinforced with 30% carbon fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Carbon fiber
  • ...
Stanyl® TW200F3 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 15% glass fiber. It provides high mechanical properties, strength, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW200F6 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW200F8 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It provides high mechanical properties, strength, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW209F8 by DSM is a platable, heat stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. Offers superior heat resistance, design stiffness, wear, friction and process flow... view more
Features
  • Filled Glass Fiber
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TW241B3 by DSM is a lubricated, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 15% carbon fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Carbon fiber
  • ...
Stanyl® TW241F10 by DSM is a high-performance, lubricated, heat-stabilized polyamide (PA 4-6) grade reinforced with 50% glass fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW241F12 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 60% glass fiber. It provides high mechanical properties, strength, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW241F3 is a lubricated, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 15% glass fiber. It provides high mechanical properties, strength, design stiffness, wear... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW241F5 by DSM is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade reinforced with 25% glass fiber. It provides high mechanical properties, heat- & chemical... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TW241F6 by DSM is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW241F8 by DSM is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TW242FM10 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade reinforced with 50% glass and mineral fiber. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Filled Mineral
  • Flow High
  • ...
Stanyl® TW250F6 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It possesses high flow & toughness, retains its mechanical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® TW271B3 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 15% carbon fiber. It is suitable for processing by injection molding. It possesses... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Carbon fiber
  • ...
Stanyl® TW271B6 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 30% carbon fiber. It is suitable for processing by injection molding. It possesses... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Filled Carbon fiber
  • Filled PTFE
  • ...
Stanyl® TW271F6 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It possesses... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW271F6J10 by DSM is a heat-stabilized, chemical resistant, high-performance polyamide 4-6 (PA 4-6) + PTFE grade reinforced with 30% glass fiber. It provides unmatched performance and value... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Friction High
  • Heat Resistance Good
  • ...
Stanyl® TW271F8 by DSM is a high-performance, wear and friction modified, heat-stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 40% glass fiber. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled PTFE
  • Flow High
  • ...
Stanyl® TW272B6 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 30% carbon fiber. It is suitable for processing by injection molding. It possesses... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Carbon fiber
  • ...
Stanyl® TW275F6 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It provides unmatched... view more
Features
  • Chemical resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • Flow High
  • ...
Stanyl® TW278F10 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. It retains... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW300 by DSM is a heat stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. Possesses high flow, low warpage, low friction, reduced cycle time, easy... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TW341 by DSM is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, cycle-time... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® TW341-B by DSM is a high-performnace, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, cycle-time... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® TW341-FC by DSM is a food contact quality, high-performance, lubricated, heat stabilized polyamide (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow... view more
Features
  • Chemical resistance Good
  • Flow High
  • Food Contact Acceptable
  • Heat Resistance High
  • ...
Stanyl® TW341-J by DSM is a high-performance, lubricated, heat stabilized polyamide (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, design stiffness, wear... view more
Features
  • Chemical resistance Good
  • Flow High
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TW341-N by DSM is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow & toughness... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® TW350 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, design... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TW363 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow & toughness, cycle-time... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® TW371 by DSM is a high-performance, unfilled, heat-stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow & toughness, cycle-time... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® TW441 by DSM is a high-performance, high-viscosity, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® WTP81 by DSM is a platable, lubricated, heat stabilized polyamide (PA 4-6) grade. Offers superior heat resistance, design stiffness, wear, friction and process flow qualities. Contains... view more
Features
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • Lubricated
  • ...
Stanyl® TQ261F5 is a heat stabilized, polyamide 4-6 (PA 4-6) grade reinforced with 25% glass fiber. Is suitable for processing by injection molding. Possesses high flow, low warpage, low friction... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TS256F6 is a flame retardant, polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. Is suitable for processing by injection molding. Possesses high flow, low warpage, low friction... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TS256F8 is a flame retardant, polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. Is suitable for processing by injection molding. Possesses high flow, low warpage, low friction... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Back to Top