OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
277 products match your search
Product Name
Supplier
Description
Mitsubishi Chemical Advanced Materials
Acetron® GP is a porosity-free, natural/black colored polyacetal, polyoxymethylene [POM] grade. Exhibits low moisture absorption and low coefficient of friction & good wear properties especially in... view more
Features
  • Chemical resistance High
  • Dimensional stability Good
  • Friction Low
  • Machinable
  • ...
Mitsubishi Chemical Advanced Materials
Acetron® MD is a blue colored polyacetal, polyoxymethylene [POM] grade containing metal detectable additive. Exhibits low moisture absorption and low coefficient of friction & good wear properties... view more
Features
  • Chemical resistance High
  • Dimensional stability Good
  • Impact resistance High
  • Friction Low
  • ...
Mitsubishi Chemical Advanced Materials
Acetron® MD POM-C by Quadrant is a blue colored, light weight POM (acetal) grade. Acetron® MD is fully metal detectable up to more than 27mm3. Exhibits good wear resistance, good chemical resistance... view more
Features
  • Chemical resistance Good
  • Food contact approved
  • Metal Detectable
Mitsubishi Chemical Advanced Materials
Duratron® 1000 PC by Quadrant is an amorphous, transparent polycarbonate (PC) grade. Exhibits high impact resistance, high modulus of elasticity and good dielectric properties. Offers good strength... view more
Features
  • Acid Resistant
  • Elasticity High
  • Electrical Properties Good
  • Food contact approved
  • ...
Mitsubishi Chemical Advanced Materials
Duratron® 1000 PSU by Quadrant is an amber semi-transparent, heat-resistant, high performance, flame resistant polysulfone (PSU) grade. Exhibits good hydrolysis, high chemical resistance to acidic &... view more
Features
  • Chemical resistance Good
  • Electrically Insulating
  • Flame retarded
  • Food contact approved
  • ...
Mitsubishi Chemical Advanced Materials
Duratron® D7000 PI by Quadrant is a polyimide (PI) grade. Exhibits high strength, good toughness and good dimensional stablility. Offers good performance at elevated temperature and good chemical... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Strength High
  • Toughness Good
Mitsubishi Chemical Advanced Materials
Duratron® PPSU by Quadrant is an amorphous, transparent, high performance polyphenylsulfone (PPSU) grade. Exhibits good impact resistance, high resistance to steam autoclaving, high modulus of... view more
Features
  • Chemical resistance Good
  • Food contact approved
  • Heat Resistance Good
  • Hydrolysis Resistant
  • ...
Mitsubishi Chemical Advanced Materials
Duratron® U1000 PEI by Quadrant is an amorphous, flame resistant polyether imide (PEI) grade. Exhibits high strength, low smoke emission and excellent heat resistance. Offers good hydrolysis... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Food contact approved
  • Heat Resistance High
  • ...
Mitsubishi Chemical Advanced Materials
Duratron® U2100 PEI by Quadrant is an amorphous, flame resistant polyether imide (PEI) grade reinforced with 10% glass. Exhibits high rigidity, improved dimensional stability, high strength, low... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled
  • Flame retarded
  • ...
Mitsubishi Chemical Advanced Materials
Duratron® U2200 PEI by Quadrant is an amorphous, flame resistant polyether imide (PEI) grade reinforced with 20% glass. Exhibits high rigidity, improved dimensional stability, high strength, low... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled
  • Flame retarded
  • ...
Mitsubishi Chemical Advanced Materials
Duratron® U2300 PEI by Quadrant is an amorphous, flame resistant polyether imide (PEI) grade reinforced with 30% glass. Exhibits high rigidity, improved dimensional stability, high strength, low... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled
  • Flame retarded
  • ...
Mitsubishi Chemical Advanced Materials
Ertacetal® C ELS by Quadrant is a polyacetal copolymer (POM-C) grade. It is available in semi finished forms (round rods, plates) as black color. Exhibits good electrical conductivity, low moisture... view more
Features
  • Electrically Conductive
  • Moisture Absorption Low
  • Stiffness High
  • Strength High
Mitsubishi Chemical Advanced Materials
Ertalyte® PET-P by QUADRANT is a crystalline polyethylene terephthalate (PET) grade. Ertalyte® PET-P is suitable for the manufacture of mechanical precision parts which have to sustain high loads... view more
Features
  • Crystalline
  • Wear resistance Good
  • Impact resistance High
Mitsubishi Chemical Advanced Materials
Ertalyte® TX by QUADRANT is an unreinforced, semi-crystalline, lubricated polyethylene terephthalate (PET) grade. Exhibits wear & chemical resistance, high-pressure & high velocity, dimensional... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Lubricated
  • Wear resistance Good
Mitsubishi Chemical Advanced Materials
Fluorosint® 135 by Quadrant is a physiologically inert polytetrafluoroethylene (PTFE) and polyphenylene sulfide (PPS) blend. Exhibits excellent chemical resistance, excellent hydrolysis resistance... view more
Features
  • Chemical resistance Good
  • CLTE Low
  • Electrically Insulating
  • Food Contact Acceptable
  • ...
Mitsubishi Chemical Advanced Materials
Ketron® PEEK 1000 is an unfilled, tough, semicrystalline, polyetheretherketone [PEEK] grade with impact strength and highest elongation. Exhibits excellent chemical resistance, hydrolysis... view more
Features
  • Abrasion resistance Good
  • Chemical resistance High
  • Compressive Strength Good
  • Creep Resistance High
  • ...
Mitsubishi Chemical Advanced Materials
Ketron® CA30 PEEK is a semicrystalline, polyetheretherketone [PEEK] grade reinforced with 30% carbon fiber. It reduces thermal expansion and provides 3.5 times higher thermal conductivity... view more
Features
  • Abrasion resistance Good
  • Chemical resistance High
  • Compressive Strength Good
  • Creep Resistance High
  • ...
Mitsubishi Chemical Advanced Materials
Ketron® GF30 PEEK is a semicrystalline, polyetheretherketone [PEEK] grade reinforced with 30% glass fiber. Reduces the expansion rate and increases the flexural modulus. Exhibits excellent chemical... view more
Features
  • Abrasion resistance Good
  • Chemical resistance High
  • Compressive Strength Good
  • Creep Resistance High
  • ...
Mitsubishi Chemical Advanced Materials
Ketron® HPV PEEK is a semicrystalline, polyetheretherketone [PEEK] grade reinforced with carbon fiber, graphite and PTFE lubricants. Offers the lowest coefficient of friction, low wear and the best... view more
Features
  • Abrasion resistance Good
  • Chemical resistance High
  • Compressive Strength Good
  • Creep Resistance High
  • ...
Mitsubishi Chemical Advanced Materials
Ketron® MD PEEK is a semicrystalline, metal detectable, polyetheretherketone [PEEK] grade. Exhibits excellent chemical resistance, hydrolysis resistance, very low moisture absorption, good wear- &... view more
Features
  • Abrasion resistance Good
  • Chemical resistance High
  • Compressive Strength Good
  • Creep Resistance High
  • ...
Mitsubishi Chemical Advanced Materials
Ketron® PEEK IM is an unfilled, semi-crystalline polyetheretherketone [PEEK] grade. Exhibits excellent chemical resistance, hydrolysis resistance, very low moisture absorption, good wear- &... view more
Features
  • Abrasion resistance Good
  • Chemical resistance High
  • Compressive Strength Good
  • Creep Resistance High
  • ...
Mitsubishi Chemical Advanced Materials
Ketron® TX PEEK is a semicrystalline, polyetheretherketone [PEEK] grade reinforced with solid lubricant. Exhibits excellent chemical resistance, hydrolysis resistance, very low moisture absorption... view more
Features
  • Abrasion resistance Good
  • Chemical resistance High
  • Compressive Strength Good
  • Creep Resistance High
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® 4.6 PA46 is a reddish-brown colored polyamide 4.6 (nylon 4.6). Offers superior heat aging and creep resistance and retention of stiffness up to 300°F. Exhibits high mechanical strength... view more
Features
  • Creep Resistance High
  • Electrically Insulating
  • Fatigue Resistant
  • Hardness High
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® 66 SA FR by Quadrant is a flame retardant, halogen free polyamide 66 (PA 66) grade. It is available in black color. Exhibits low moisture absorption and is free of heavy metal. Recommended... view more
Features
  • Flame retarded
  • Halogen Free
  • Moisture Absorption Low
Mitsubishi Chemical Advanced Materials
Nylatron® 703 XL PA6 is a purple colored, self-lubricating polyamide 6 (nylon 6). Provides superior load bearing capability and an industry first- a near zero level of "stick-slip. The elimination... view more
Features
  • Cost Effective
  • Electrically Insulating
  • Fatigue Resistant
  • Hardness High
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® GF30 PA66 is a polyamide 66 (nylon 66) reinforced with 30% glass fiber. Offers high compressive strength and rigidity. Exhibits high mechanical strength, stiffness, good fatigue... view more
Features
  • Compressive Strength Good
  • Electrically Insulating
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® GS PA66 is a grey-black colored polyamide 66 (nylon 66) reinforced with molybdenum disulphide. Offers improved rigidity and low coefficient of linear thermal expansion. Exhibits high... view more
Features
  • Coefficient Of Thermal Expansion Low
  • Electrically Insulating
  • Fatigue Resistant
  • Hardness High
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® GSM Blue PA6 is a dark blue, internally lubricated, heat stabilized, polyamide 6 (nylon 6) with molybdenum disulphid (MoS) and oil. Offers low coefficient of friction, good limiting PV and... view more
Features
  • Friction Low
  • Electrically Insulating
  • Fatigue Resistant
  • Hardness High
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® GSM PA6 is a polyamide 6 (nylon 6) with molybdenum disulphide. Exhibits high mechanical strength, stiffness, good fatigue resistance, excellent wear resistance, good electrical insulating... view more
Features
  • Electrically Insulating
  • Fatigue Resistant
  • Hardness High
  • Friction High
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® LFG PA6 is a natural (ivory)/blue, self-lubricating, heat stabilized polyamide 6 (nylon 6). Offers lower maintenance costs and longer service life. Exhibits high mechanical strength... view more
Features
  • Cost Effective
  • Electrically Insulating
  • Fatigue Resistant
  • Hardness High
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® LIG PA6 is an internally lubricated polyamide 6 (nylon 6) with oil-based lubricant. It improves load bearing performance and reduces coefficient of friction. Exhibits high mechanical... view more
Features
  • Friction Low
  • Electrically Insulating
  • Fatigue Resistant
  • Hardness High
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® MC907 PA6 is an off-white colored, unmodified polyamide 6 (nylon 6). Exhibits high mechanical strength, stiffness, good fatigue resistance, excellent wear resistance, good electrical... view more
Features
  • Electrically Insulating
  • Fatigue Resistant
  • Food contact approved
  • Hardness High
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® MC901 PA6 is a blue colored, heat stabilized polyamide 6 (nylon 6). Offers long-term thermal stability to 260°F. Exhibits high mechanical strength, stiffness, good fatigue resistance... view more
Features
  • Electrically Insulating
  • Fatigue Resistant
  • Hardness High
  • Heat stabilized
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® MD by Quadrant is a polyamide 6 (PA 6) grade containing a metal detectable additive. The grade shows metal and visual detection by blue color and detection by X-ray is also possible... view more
Features
  • Fatigue Resistant
  • Food contact approved
  • Metal Detectable
  • Moisture Absorption Low
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® NSM PA6 is a self-lubricating polyamide 6 (nylon 6) with solid lubricant. Provides weight and noise reduction as well as excellent cost vs. performance ratio value & corrosion resistance... view more
Features
  • Corrosion Resistance Good
  • Electrically Insulating
  • Fatigue Resistant
  • Friction Low
  • ...
Mitsubishi Chemical Advanced Materials
Nylatron® WP PA6 is a stress-free, self-lubricating polyamide 6 (nylon 6). Exhibits low friction, high limiting PV, reduces chatter and stick slip. Reduces maintenance and the associated downtime... view more
Features
  • Corrosion Resistance Good
  • Cost Effective
  • Electrically Insulating
  • Fatigue Resistant
  • ...
Mitsubishi Chemical Advanced Materials
Quadrant Nylon 101 PA 66 is a natural/black colored, internally lubricated, heat stabilized, unmodified polyamide 66 (nylon 66). Exhibits good mechanical & electrical properties and ideal balance of... view more
Features
  • Electrical Properties Good
  • Food contact approved
  • Heat stabilized
  • Lubricated
  • ...
Mitsubishi Chemical Advanced Materials
Quadrant® PC 1000 is an unfilled, non-optical, non-UV stabilized, natural, physiologically inert (food contact compliant composition]), transparent, amorphous polycarbonate [PC]. Offers stiffness... view more
Features
  • Acid Resistant
  • Amorphous
  • Creep Resistance High
  • Dielectric Strength Good
  • ...
Mitsubishi Chemical Advanced Materials
Semitron® ESd 490HR is a static dissipative polyetheretherketone [PEEK] grade. Provides a controlled bleed-off of static charges and it is not subject to dielectric breakdown. Exhibits good... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Thermal Stability Good
  • Impact resistance High
Mitsubishi Chemical Advanced Materials
Semitron® CMP LL5 is an opaque, white colored polyethylene terephthalate [PET]. Has Long life material - up to 5x PPS and shows best performance in oxide chemistries - up to 8x PPS. Used in... view more
Features
  • Opaque
  • Impact resistance High
Mitsubishi Chemical Advanced Materials
Semitron® CMP XL20 is an opaque, charcoal/black colored polyarylimide [PAI]. Has significantly lower cost per wafer, outperforms PPS up to 20x in most processes. Exhibits high strength & stiffness... view more
Features
  • Cost Effective
  • Opaque
  • Stiffness High
  • Strength High
  • ...
Mitsubishi Chemical Advanced Materials
Semitron® ESd 225 is a beige/tan colored static dissipative polyacetal, polyoxymethylene [POM] grade. Provides controlled bleed-off of static charges. Exhibits good wear resistance, thermal... view more
Features
  • Thermal Stability Good
  • Impact resistance High
Mitsubishi Chemical Advanced Materials
Semitron® ESd 410C is an opaque black colored static dissipative polyether imide [PEI] grade. Provides controlled bleed-off of static charges. Exhibits high strength & stiffness, low stress for... view more
Features
  • Machinable
  • Opaque
  • Stiffness High
  • Strength High
  • ...
Mitsubishi Chemical Advanced Materials
Semitron® ESd 420 is a static dissipative polyether imide [PEI] grade. Provides a controlled bleed-off of static charges. Exhibits thermal performance and dissipate static charges [5kV] in less than... view more
Features
  • Thermal Stability Good
  • Impact resistance High
Mitsubishi Chemical Advanced Materials
Semitron® ESd 420V is a cost-effective, static dissipative polyether imide [PEI] grade. Provides a controlled bleed-off of static charges. Exhibits high strength & stiffness, good dimensional... view more
Features
  • Cost Effective
  • Dimensional stability Good
  • Moisture Absorption Low
  • Stiffness High
  • ...
Mitsubishi Chemical Advanced Materials
Semitron® ESd 480 is a static dissipative polyetheretherketone [PEEK] grade. Provides controlled bleed-off of static charges and it is not subject to dielectric breakdown. Exhibits good dimensional... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Thermal Stability Good
  • Impact resistance High
Mitsubishi Chemical Advanced Materials
Semitron® ESd 500HR is a white colored static dissipative polytetrafluoroethylene [PTFE] grade reinforced with synthetic mica. Offers an excellent combination of low frictional properties and... view more
Features
  • Chemical resistance Good
  • Friction Low
  • Dimensional stability Good
  • Filled
  • ...
Mitsubishi Chemical Advanced Materials
Semitron® ESd 520HR by Quadrant is a khaki grey colored static dissipative polyaryl imide [PAI] grade. Provides a controlled bleed-off of static charges. Exhibits high strength, heat resistance... view more
Features
  • Heat Resistance High
  • Machinable
  • Strength High
  • Thermal Stability Good
  • ...
Mitsubishi Chemical Advanced Materials
Semitron® MPR1000 by Quadrant is a durable and machinable thermoplastic grade developed for semiconductor applications. It exhibits excellent longevity, excellent heat resistance, low ionic metal... view more
Features
  • Durable
  • Heat Resistance Good
  • Machinable
Mitsubishi Chemical Advanced Materials
TIVAR® 1000 by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, shows good performance and reduces noise. Suitable for diverter bars... view more
Features
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • Odor Low to None
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® 1000 ANTI-STATIC by QUADRANT is a very tough, anti-static, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, shows good performance and reduces noise... view more
Features
  • Antistatic
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® 1000 POLYSTEEL by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, shows good performance and reduces noise. TIVAR® 1000... view more
Features
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • Odor Low to None
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® 88 by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength and shows good performance in promoting flow of cohesive or non-free... view more
Features
  • Friction Low
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® 88-2 by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength and shows good performance in promoting flow of cohesive or non-free... view more
Features
  • Friction Low
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® CERAM P® by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, shows good performance and reduces noise. Shows high resistance to... view more
Features
  • Abrasion resistance High
  • Chemical resistance Good
  • Corrosion Resistance Good
  • Impact resistance High
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® CLEANSTAT by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, shows good performance and reduces noise. TIVAR® CLEANSTAT is... view more
Features
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • Odor Low to None
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® DRYSLIDE by QUADRANT is a self-lubricating, very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, electro-static dissipation which eliminates shock... view more
Features
  • Corrosion Resistance Good
  • Friction Low
  • Impact resistance High
  • Lubricating Self
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® DS by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, shows good performance and reduces noise. TIVAR® DS is suitable for... view more
Features
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • Odor Low to None
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® EXP by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, shows good performance and reduces noise. TIVAR® EXP is suitable for... view more
Features
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • Odor Low to None
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® H.O.T by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, shows good performance, high wear resistance, release characteristics... view more
Features
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • Odor Low to None
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® MD by Quadrant is a grey colored, ultra-high molecular weight polyethylene (PE-UHMW) with extremely high degree of polymerization containing a metal detectable (MD) additive. Delivers the... view more
Features
  • Abrasion resistance Good
  • Food contact approved
  • Impact resistance High
  • Metal Detectable
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® OIL FILLED by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, shows good performance and reduces noise. Suitable for diverter... view more
Features
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • Odor Low to None
  • ...
Mitsubishi Chemical Advanced Materials
TIVAR® UV RESISTANT by QUADRANT is a very tough, ultra-high molecular weight (UHMW) polyethylene grade. Exhibits high impact strength, shows good performance, UV resistance and reduces noise. TIVAR®... view more
Features
  • Impact resistance High
  • Molecular Wt Ultra High
  • Noise Damping
  • Odor Low to None
  • ...
Mitsubishi Chemical Advanced Materials
Techtron® PPS by Quadrant is a semi-crystalline, inherently lubricated, deep blue colored polyphenylene sulfide [PPS]. Exhibits high mechanical strength, stiffness & creep resistance at elevated... view more
Features
  • Acid Resistant
  • Base Resistant
  • Chemical resistance High
  • Coefficient Of Thermal Expansion Low
  • ...
Mitsubishi Chemical Advanced Materials
Techtron® PPS by Quadrant is a semi-crystalline, unfilled, inherently flame retardant, natural colored polyphenylene sulfide [PPS]. Exhibits high mechanical strength, stiffness & creep resistance at... view more
Applications
Features
  • Acid Resistant
  • Base Resistant
  • Chemical resistance High
  • Coefficient Of Thermal Expansion Low
  • ...
Mitsubishi Chemical Advanced Materials
Techtron® PSBG PPS is a semi-crystalline, internally lubricated polyphenylene sulfide [PPS] reinforced with carbon fiber. Exhibits high mechanical strength, stiffness & creep resistance at elevated... view more
Features
  • Chemical resistance High
  • Coefficient Of Thermal Expansion Low
  • Creep Resistance High
  • Crystalline Semi
  • ...
Mitsubishi Chemical Advanced Materials
Techtron® PSGF PPS is a semi-crystalline polyphenylene sulfide [PPS] reinforced with 40% glass fiber. It is a compression molded analogue to Ryton R4 resin. Exhibits high mechanical strength... view more
Features
  • Chemical resistance High
  • Coefficient Of Thermal Expansion Low
  • Creep Resistance High
  • Crystalline Semi
  • ...
Acetron AF POM-H acetal is a unique thermoplastic material for use in moving parts in which low friction and long wear are important. It is a combination of Teflon* fibers uniformly dispersed in... view more
Acetron GP is Quadrant EPP's general purpose acetal and is the only porosity-free acetal product available today. Investments in process technology by Quadrant EPP now provide the performance and... view more
Within its portfolio of Life Science Grade Engineering Plastic Products - specifically developed for applications in the medical, pharmaceutical and biotechnology industries - Quadrant offers... view more
Metal detectable POM-C grade... view more
Acetron POM-H is a homopolymer acetal. Stocked in rod and plate, it offers slightly higher mechanical properties than Acetron GP Acetal, but may contain a low-density center, especially in larger... view more
Mitsubishi Chemical Advanced Materials
Borotron® HD050 is based on Quadrant's high performance HDPE with 5% elemental boron. Borotron® has been used as a medical and industrial shielding material to attenuate and absorb neutron... view more
Borotron UH and Borotron HM are boron loaded PE-(U)HMW grades, specifically developed for neutron shielding purposes in nuclear installations. The high hydrogen content of PE-(U)HMW makes it very... view more
Borotron UH and Borotron HM are boron loaded PE-(U)HMW grades, specifically developed for neutron shielding purposes in nuclear installations. The high hydrogen content of PE-(U)HMW makes it very... view more
Mitsubishi Chemical Advanced Materials
Data provided by Quadrant Engineering Plastic Products for polymers in their European product line... view more
Mitsubishi Chemical Advanced Materials
Data provided by Quadrant Engineering Plastic Products for polymers in their European product line... view more
Mitsubishi Chemical Advanced Materials
Data provided by Quadrant Engineering Plastic Products for polymers in their European product line... view more
Mitsubishi Chemical Advanced Materials
Data provided by Quadrant Engineering Plastic Products for polymers in their European product line... view more
Mitsubishi Chemical Advanced Materials
Data provided by Quadrant Engineering Plastic Products for polymers in their European product line... view more
Mitsubishi Chemical Advanced Materials
Data provided by Quadrant Engineering Plastic Products for polymers in their European product line... view more
Mitsubishi Chemical Advanced Materials
Data provided by Quadrant Engineering Plastic Products for polymers in their European product line... view more
Duratron T4203 PAI offers the best toughness and impact strength of all Duratron PAI grades. This extruded Duratron PAI grade is very popular for precision parts in high-tech equipment. In addition... view more
Duratron® T4203 extruded PAI offers excellent compressive strength and the highest elongation of the Duratron® PAI grades. It also provides electrical insulation and exceptional impact strength... view more
The addition of PTFE and graphite provides higher wear resistance and lower coefficient of friction compared to the unfilled grade as well as a lower tendency to stick-slip. Duratron T4301 PAI also... view more
Duratron® T4301 extruded PAI is primarily used for wear and friction parts. It offers a very low expansion rate, low coefficient of friction and exhibits little or no slip-stick in use. Duratron®... view more
Duratron® T4501 compression molded PAI is well suited for general purpose wear and friction parts. It has a higher compressive strength and can therefore carry more load than Duratron® T4540. It... view more
Compression moulded Duratron T4501 PAI is similar in composition to Duratron T4301 PAI, and is selected when larger shapes are required... view more
Duratron® T4503 compression molded PAI is commonly used for dies and patterns of formed metal parts, or as thermal insulators and isolators. It is similar in composition to Duratron® T4203 PAI, and... view more
Compression moulded Duratron T4503 PAI is similar in composition to Duratron T4203 PAI, and is selected when larger shapes are required... view more
Duratron® T4540 compression molded PAI is a seal and bearing grade offers a very low coefficient of friction and good wear properties. It was developed specifically for use in rotating equipment... view more
Service in various chemicals: Weak Acids - Acceptable. Strong Acids - Acceptable. Weak Alkali - Limited. Strong Alkali - Unacceptable. Aromatic Hydrocarbons - Acceptable. Aliphatic Hydrocarbons... view more
Duratron® T5530 is 30% glass reinforced, compression molded PAI. It is ideal for higher load structural or electronic applications. This grade is similar in composition to Duratron® T5030 PAI. It... view more
This 30 % glass fibre reinforced grade offers higher stiffness, strength and creep resistance than the Duratron PAI grades mentioned above. It is well suited for structural applications supporting... view more
Service in various chemicals: Weak Acids - Acceptable. Strong Acids - Acceptable. Weak Alkali - Limited. Strong Alkali - Unacceptable. Aromatic Hydrocarbons - Acceptable. Aliphatic Hydrocarbons... view more
Duratron® PBI is the highest performance engineering plastic available from Quadrant EPP. It offers the highest mechanical properties of any thermoplastic above 400° F (205° C). Duratron® PBI is... view more
Duratron CU60 PBI offers the highest temperature resistance and best mechanical property retention over 200°C of all unfilled thermoplastics. Duratron CU60 PBI is very "clean" in terms of ionic... view more
Mitsubishi Chemical Advanced Materials
Within its portfolio of Life Science Grade Engineering Plastic Products - specifically developed for applications in the medical, pharmaceutical and biotechnology industries - Quadrant offers... view more
Duratron® U1000 polyetherimide is an amorphous, high-performance polymer with exceptional flame and heat resistance. It performs continuously to 340°F (171°C), making it ideal for high... view more
Duratron U1000 PEI is an amber translucent (non-optical quality) amorphous thermoplastic material, offering high strength and heat resistance. It performs continuously to 170 °C, making it ideal for... view more
Duratron® U1000 polyetherimide is an amorphous, high-performance polymer with exceptional flame and heat resistance. It performs continuously to 340°F (171°C), making it ideal for high... view more
Duratron® U2300 is an extruded 30% glass reinforced polyetherimide. It is an amorphous, high-performance polymer with exceptional flame and heat resistance. It performs continuously to 340°F... view more
Mitsubishi Chemical Advanced Materials
Duratron D7000 PI - the basic grade within the Duratron PI family - is made from unfilled polyimide resin and provides maximum physical properties and best electrical and thermal insulation... view more
This grade contains 15 % graphite, added to provide long wear and low friction... view more
Mitsubishi Chemical Advanced Materials
Ertacetal C is Quadrant's copolymer acetal grade. Next to the standard natural and black grades, there is also a series of special colours available all showing an FDA food contact compliant... view more
Mitsubishi Chemical Advanced Materials
Ertacetal H is Quadrant's homopolymer acetal grade. It offers a higher mechanical strength, stiffness, hardness and creep resistance as well as a lower thermal expansion rate and often also a better... view more
Ertacetal H-TF is a DELRIN® AF Blend, a combination of TEFLON® fibres evenly dispersed in a DELRIN acetal resin. Much of the strength that is inherent in Ertacetal H is retained. Some properties... view more
Mitsubishi Chemical Advanced Materials
Compared with conventional nylons, Ertalon 4.6 features a better retention of stiffness and creep resistance over a wide range of temperatures as well as superior heat ageing resistance. Therefore... view more
Mitsubishi Chemical Advanced Materials
Unmodified cast nylon 6 grade exhibiting characteristics which come very close to those of Ertalon 66 SA. It combines high strength, stiffness and hardness with good creep and wear resistance, heat... view more
Mitsubishi Chemical Advanced Materials
This material offers an optimal combination of mechanical strength, stiffness, toughness, mechanical damping properties and wear resistance. These properties, together with good electrical... view more
Compared with virgin PA 66, this 30 % glass fibre reinforced and heat stabilised nylon grade offers increased strength, stiffness, creep resistance and dimensional stability whilst retaining an... view more
Mitsubishi Chemical Advanced Materials
Material with a higher mechanical strength, stiffness, heat and wear resistance than Ertalon 6 SA. It also has a better creep resistance but its impact strength and mechanical damping ability is... view more
Ertalon 6 XAU+ is a heat stabilized cast nylon grade with a very dense and highly crystalline structure. Compared with conventional extruded or cast nylons, Ertalon 6 XAU+ offers superior heat... view more
Mitsubishi Chemical Advanced Materials
This internally lubricated cast nylon 6 is self-lubricating in the real meaning of the word. Ertalon LFX, especially developed for unlubricated, highly loaded and slow moving parts applications... view more
Mitsubishi Chemical Advanced Materials
The specific properties of this virgin crystalline PET make it especially suitable for the manufacture of mechanical precision parts which have to sustain high loads and/or are subject to wear... view more
Ertalyte PET-P is an unreinforced, semi-crystalline thermoplastic polyester based on polyethylene terephthalate (PET-P). It offers the wear resistance of nylon with the dimensional stability of... view more
Ertalyte TX is a polyethylene terephthalate compound incorporating a uniformly dispersed solid lubricant. Its specific formulation makes it a premium internally lubricated bearing-grade. Ertalyte TX... view more
Ertalyte TX is an extruded form of polyethylene terephthalate (PET-P) with a uniformly dispersed solid lubricant, providing superior wear resistance to most lubricated acetals and polyesters. In... view more
Fluorosint 207's unmatched dimensional stability, excellent creep resistance and white color uniquely position this material to serve FDA regulated applications. It is non-permeable in steam and... view more
This material has a food contact compliant composition which, in combination with the good mechanical performance, dimensional stability, sliding and wear properties and inherent outstanding... view more
Fluorosint 500 has nine times greater resistance to deformation under load than unfilled PTFE. Its coefficient of linear thermal expansion approaches the expansion rate of aluminum, and is 1/5 that... view more
Reinforced with a proprietary synthetic mica, this material exhibits, in addition to its inherent outstanding chemical and hydrolysis resistance, very good mechanical and tribological properties... view more
Mica-filled PTFE provides a unique blend of strength and dimensional stability along with an excellent wear enhancing additive technology. This product provides excellent wear and stability in... view more
FDA compliant Fluorosint HPV is a high performance Fluorosint bearing grade, optimized for high pressure-velocity capabilities and very low wear. Fluorosint HPV was developed for bearing... view more
Fluorosint MT-01 is an extreme service grade developed specifically for applications where the benefits of PTFE-based materials also require strength, stiffness and stability. Fluorosint MT-01... view more
KETRON® PEEK LSG natural / black stock shapes are produced from batches of Victrex PEEK. This material exhibits a unique combination of mechanical properties, temperature and chemical resistance... view more
Ketron PEEK grades offer chemical and hydrolysis resistance similar to PPS, but can operate at higher temperatures. Unreinforced, extruded Ketron PEEK offers good wear resistance and can be used... view more
Ketron PEEK-1000 stock shapes are produced from virgin polyetheretherketone resin and offer the highest toughness and impact strength of all Ketron PEEK grades. Both Ketron PEEK-1000 natural & black... view more
KETRON® PEEK-CA30 LSG stock shapes are produced from genuine VICTREX® PEEK polymer. This 30% carbon fibre reinforced grade combines even higher stiffness, mechanical strength and creep resistance... view more
This 30 % carbon fibre reinforced grade combines even higher stiffness, mechanical strength and creep resistance than Ketron PEEK-GF30 with an optimum wear resistance. Moreover, compared with... view more
Within its portfolio of Life Science Grade Engineering Plastic Products - specifically developed for applications in the medical, pharmaceutical and biotechnology industries - Quadrant offers KETRON... view more
Data provided by Quadrant Engineering Plastic Products... view more
Data provided by Quadrant Engineering Plastic Products... view more
Compression molded 30% Glass fiber reinforced polyetheretherketone. The addition of glass fibers significantly reduces the expansion rate and increases the flexural modulus of PEEK. This grade is... view more
KETRON® PEEK-GF30 LSG blue stock shapes are produced from genuine VICTREX® PEEK polymer. This 30% glass fibre reinforced grade combines higher stiffness and creep resistance than KETRON PEEK LSG... view more
This 30 % glass fibre reinforced grade offers a higher stiffness and creep resistance than Ketron PEEK-1000 and has a much better dimensional stability. This grade is very appropriate for structural... view more
Extruded 30% Glass fiber reinforced polyetheretherketone. The addition of glass fibers significantly reduces the expansion rate and increases the flexural modulus of PEEK. This grade is ideal for... view more
The addition of carbon fibres, PTFE and graphite to virgin PEEK results in a Ketron PEEK "bearing grade". Its excellent tribological properties (low friction, long wear and high pressure-velocity... view more
This bearing grade of extruded Ketron PEEK offers the lowest coefficient of friction and best machinability of all Ketron grades. It is ideal for low wear, high PV parts that require chemical... view more
Within its portfolio of Life Science Grade Engineering Plastic Products - specifically developed for applications in the medical, pharmaceutical and biotechnology industries - Quadrant offers KETRON... view more
Within its portfolio of Life Science Grade Engineering Plastic Products - specifically developed for applications in the medical, pharmaceutical and biotechnology industries - Quadrant offers KETRON... view more
Mitsubishi Chemical Advanced Materials
Within its portfolio of Life Science Grade Engineering Plastic Products - specifically developed for applications in the medical, pharmaceutical and biotechnology industries - Quadrant offers KETRON... view more
KETRON® PEEK-CLASSIX LSG white stock shapes are produced from Invibio® PEEK-CLASSIX White resin. This material exhibits a unique combination of mechanical properties, temperature and chemical... view more
Extruded 30% Carbon fiber reinforced polyetheretherketone. The addition of carbon fibers enhances the compressive strength and stiffness of PEEK, and dramatically lowers its expansion rate. It... view more
This member of the Ketron PEEK family has been developed especially for the food industry. Like Ketron PEEK-1000, this new internally lubricated material has a food contact compliant composition... view more
Data provided by Quadrant Engineering Plastic Products... view more
Pile driver pads are used to prevent damage to the pile and the piling hammer. Fillers are usually made of hardwood - Azobe, for example. The disadvantage of Azobe is the 30-40% energy loss and... view more
Data provided by Quadrant Engineering Plastic Products... view more
Mitsubishi Chemical Advanced Materials
Compared with conventional nylons, Nylatron 4.6 features a better retention of stiffness and creep resistance over a wide range of temperatures as well as superior heat aging resistance. Nylatron... view more
Key Benefits:No "Slip-Stick" for precise, efficient controlExcellent mechanical strength to withstand high loadsVery abrasion resistantGood thermal resistanceGood dimensional... view more
This high performance cast nylon 6 bearing grade provides an even better wear resistance than Nylatron NSM, combined with superior pressure-velocity capabilities and an industry first: a near zero... view more
Data provided by Quadrant Engineering Plastic Products... view more
Mitsubishi Chemical Advanced Materials
The addition of MoS2 renders this material somewhat stiffer, harder and dimensionally more stable than Ertalon 66 SA, but results in some loss of impact strength. The nucleating effect of the... view more
Nylatron GS Nylon is a nylon and molybdenum disulphide (MoS2) composition designed to improve the mechanical, thermal and bearing properties of type 6/6 nylon while maintaining its basic electrical... view more
Nylatron GSM Blue nylon is the first cast nylon to combine both molybdenum disulfide and oil for the load capability of Nylatron GSM nylon, plus improved frictional characteristics. It excels in... view more
Mitsubishi Chemical Advanced Materials
Nylatron GSM contains finely divided particles of molybdenum disulphide to enhance its bearing and wear behaviour without impairing the impact and fatigue resistance inherent to unmodified cast... view more
Nylatron GSM cast nylon contains finely divided particles of molybdenum disulfide to enhance its load bearing capabilities while maintaining the impact resistance inherent to nylon. It is the most... view more
Mitsubishi Chemical Advanced Materials
Nylatron LFG (Lubricated Food Grade) is self-lubricating in the real meaning of the word, and has a FDA food contact compliant composition. The Nylatron LFG has been specially developed for... view more
Mitsubishi Chemical Advanced Materials
This modified cast nylon 6 grade with its distinctive blue colour exhibits higher toughness, flexibility and fatigue resistance than Ertalon 6 PLA. It has proved to be an excellent material for gear... view more
Data provided by Quadrant Engineering Plastic Products... view more
Data provided by Quadrant Engineering Plastic Products... view more
Metal detectable 6SA grade... view more
Data provided by Quadrant Engineering Plastic Products... view more
Nylatron NSM is a proprietary cast nylon 6 formulation containing solid lubricant additives which grant this materials self-lubricity, excellent frictional behaviour, superior wear resistance and... view more
Nylatron NSM is the premium bearing and wear nylon product available today. Solid lubricant additives impart self-lubricating, high pressure/velocity and superior wear resistance characteristics... view more
Quadrant's wear resistant grade of cast nylon optimized for linear bearing applications. Offers an ideal combination of value and performance... view more
Mitsubishi Chemical Advanced Materials
This grade exhibits a good combination of stiffness, toughness, mechanical damping ability with wear- and abrasion resistance and can easily be welded. In less demanding applications with respect to... view more
Data provided by Quadrant Engineering Plastic Products... view more
Mitsubishi Chemical Advanced Materials
Within its portfolio of Life Science Grade Engineering Plastic Products - specifically developed for applications in the medical, pharmaceutical and biotechnology industries - Quadrant offers... view more
Data provided by Quadrant Engineering Plastic Products... view more
Mitsubishi Chemical Advanced Materials
Within its portfolio of Life Science Grade Engineering Plastic Products - specifically developed for applications in the medical, pharmaceutical and biotechnology industries - Quadrant offers... view more
Mitsubishi Chemical Advanced Materials
Within its portfolio of Life Science Grade Engineering Plastic Products - specifically developed for applications in the medical, pharmaceutical and biotechnology industries - Quadrant offers... view more
Nylon 101 is an extruded form of polyamide, offering rigidity, strength, wear resistance, and heat resistance to 210°F. It is commonly used in both structural and general-purpose bearing and wear... view more
Data provided by Quadrant Engineering Plastic Products... view more
Mitsubishi Chemical Advanced Materials
Quadrant Engineering Plastic Products is marketing non-UV-stabilized polycarbonate stock shapes under the trade name Quadrant PC 1000. It is a natural, "non-optical" industrial quality (clear... view more
Mitsubishi Chemical Advanced Materials
Quadrant PPSU is a black, amorphous high performance thermoplastic, offering better impact strength and chemical resistance than polysulfone and polyetherimide. Quadrant PPSU also has superior... view more
Data provided by Quadrant Engineering Plastic Products... view more
Quadrant 1000 PSU is a slightly yellow, translucent (non-optical quality) amorphous thermoplastic material, offering a combination of excellent mechanical, thermal and electrical properties. It... view more
Data provided by Quadrant Engineering Plastic Products... view more
Data provided by Quadrant Engineering Plastic Products... view more
Enhanced semi-crystalline polyester product for extended service in CMP retaining rings. Superior performance, especially in oxide processes, and cost effective relative to standard ring materials... view more
Enhanced imidized product for the longest life in CMP retaining ring applications. Superior life in all CMP processes tested, up to 20 times better than standard products. High strength and... view more
Semitron ESd 225 is an acetal based static dissipative material ideal for material handling operations. It is also an excellent choice for fixturing used in the manufacturing of hard disk drives or... view more
Semitron ESd 225HR is part of the Quadrant EPP family of products designed for use in the semiconductor industry, where electrostatic dissipation is a requirement. It is an extruded, static... view more
Semitron ESd 410C is part of the Quadrant EPP family of products designed for use in the semiconductor industry, where electrostatic dissipation is a requirement. It is a compression-molded, static... view more
Having an excellent mechanical performance up to 210 °C, Semitron ESd 410C provides ESd-solutions at higher temperatures. Additionally, Semitron ESd 410C exhibits excellent dimensional stability... view more
Semitron ESd 420 is part of the Quadrant EPP family of products designed for use in the semiconductor industry, where electrostatic dissipation is a requirement. It is a compression-molded material... view more
Data provided by Quadrant Engineering Plastic Products... view more
Reinforced with a proprietary synthetic mica, Semitron ESd 500HR offers an excellent combination of low frictional properties, good dimensional stability and electrostatic dissipation. Whenever... view more
Semitron ESd 520HR is part of the Quadrant EPP family of products designed for use in the semiconductor industry, where electrostatic dissipation is a requirement. It is a compression-molded... view more
Semitron ESd 520HR has an industry first combination of electrostatic dissipation (ESd), high strength and heat resistance. This new ESd material is ideal for making nests, sockets and contactors... view more
Mitsubishi Chemical Advanced Materials
Semitron® MDS 100 was developed specifically to provide a highly rigid, stable, moisture-resistant platform for precision structural applications. Its unique, proprietary polymer matrix makes it... view more
Mitsubishi Chemical Advanced Materials
High temperature material offering outstanding machinability and dimensional stability... view more
Mitsubishi Chemical Advanced Materials
Semitron® MPR-1000 is a high temperature material that offers outstanding resistance to plasma etch... view more
Symalit 1000 ECTFE is made from a fluoropolymer resin that is a copolymer of ethylene and chlorotrifluoroethylene. It exhibits good mechanical properties combined with an excellent chemical... view more
Symalit 1000 PFA is made from a fluoropolymer resin that is a copolymer of tetrafluoroethylene and perfluorovinylether. It exhibits good mechanical properties combined with excellent electrical... view more
Symalit 1000 PVDF is a highly crystalline unreinforced fluoropolymer combining good mechanical, thermal and electrical properties with excellent chemical resistance. It also shows good resistance to... view more
Data provided by Quadrant Engineering Plastic Products... view more
Data provided by Quadrant Engineering Plastic Products... view more
TIVAR 1000 ASTL, based on a PE-UHMW grade with extremely high molecular weight, has been specifically developed for tough anti-abrasion applications. TIVAR 1000 ASTL shows a higher wear and abrasion... view more
TIVAR 1000 EC is a PE-UHMW grade containing specific additives rendering this material a lower surface resistivity than TIVAR 1000 antistatic, improving electrical conductivity and UV-resistance... view more
Mitsubishi Chemical Advanced Materials
TIVAR 1000 exhibits a very well balanced property profile. It combines a very good wear and abrasion resistance with an outstanding impact strength, even at temperatures below -200°C... view more
By incorporating an effective carbon black grade, TIVAR 1000 antistatic offers the electrostatic dissipative properties often required for PE-UHMW components operating at high line speeds and... view more
TIVAR Burnguard is a PE-UHMW grade containing a very effective non-halogenated flame retardant. Specifically developed to improve the poor flammability behaviour of straight forward virgin... view more
TIVAR Ceram P is a wear improved PE-UHMW material with incorporated micro glass beads, specifically developed for use in the dewatering zone of paper machinery equipped with plastic wires and... view more
TIVAR CleanStat is a PE-UHMW grade for use in food processing and pharmaceutical industries. It exhibits static dissipative properties and has a food contact compliant composition... view more
Mitsubishi Chemical Advanced Materials
TIVAR DS is a modified PE-UHMW with extremely high molecular weight. The latter in combination with a particular manufacturing process result in a PE-UHMW grade with superior wear and abrasion... view more
Thanks to the lubricant built into a PE-UHMW matrix with higher molecular weight, TIVAR DrySlide offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR 1000. The... view more
Mitsubishi Chemical Advanced Materials
This grade, partially composed of reprocessed PE-UHMW material, has an overall lower property level than the virgin TIVAR 1000 and a lower cost. Compared with virgin PE 500, however, it has a much... view more
TIVAR H.O.T. [Higher Operating Temperature] is formulated to maintain inherent PE-UHMW key properties over an extended service temperature range, in this way considerably increasing part life in low... view more
This PE-UHMW grade with extremely high degree of polymerisation contains a metal detectable additive which does hardly affect the inherent PE-UHMW key properties. TIVAR MD presents excellent... view more
Mitsubishi Chemical Advanced Materials
TIVAR Oil Filled is a self-lubricating PE-UHMW material in the real meaning of the word. Next to an enhanced wear resistance, the incorporated and evenly dispersed oil renders this material a... view more
TIVAR SuperPlus is a wear optimised, partially cross-linked PE-UHMW material with extremely high degree of polymerisation for use in most demanding applications and environments. When used for... view more
Mitsubishi Chemical Advanced Materials
This PE-UHMW grade with extremely high degree of polymerisation contains molybdenum disulphide, resulting in a material with improved wear resistance and sliding properties over TIVAR 1000... view more
PPS products offer the broadest resistance to chemicals of any advanced engineering plastic. They have no known solvents below 392°F (200°C) and offer inertness to steam, strong bases, fuels and... view more
As a reinforced, internally lubricated PPS grade, Techtron HPV PPS demonstrates an excellent combination of properties including wear resistance, load-bearing capabilities and dimensional stability... view more
TECHTRON® HPV is a reinforced, internally lubricated semi-crystalline polymer developed to close the gap both in performance and price between the standard thermoplastic materials (e.g., PA, POM... view more
Mitsubishi Chemical Advanced Materials
This unfilled polyphenylene sulfide based material is ideal for structural applications in corrosive environments or as a PEEK replacement at less demanding temperatures. Very good dimensional... view more
Data provided by Quadrant Engineering Plastic Products... view more
Data provided by Quadrant Engineering Plastic Products... view more
This semi-finished product in panel form was developed primarily as a substitute for metals (steel, aluminum etc.) and its main purchasers can be found in the automotive industry. This is where it... view more
Based on GMT, the composite GMTex has been further developed for applications demanding high impact resistance, strength and durability. In the production of these high-performance thermoplastic... view more
MultiQ is a product line of thermoplastic composites in panel form whose specific properties make them particularly suitable as an environmental alternative to plywood in outdoor applications... view more
MultiQ is a product line of thermoplastic composites in panel form whose specific properties make them particularly suitable as an environmental alternative to plywood in outdoor applications... view more
High performance fluoropolymers
Back to Top