OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
50 products match your search
Product Name
Supplier
Description
Omnia Plastica
ARNITE PETP by Omnia Plastica is a natural colored, semi-crystalline, physiologically inert polyethylene terephthalate (PET) grade. Possesses good toughness, good compressive strength even at low... view more
Features
  • Acid Resistant
  • Compressive Strength Good
  • Crystalline Semi
  • Dimensional stability Good
  • ...
Omnia Plastica
Akulon® PA6 by Omnia Plastica is a natural colored, high viscosity, hygroscopic, self-lubricating, semi-crystalline, fatigue proof, general purpose polyamide 6 (PA 6, Nylon 6) grade. Possesses good... view more
Features
  • Abrasion resistance Good
  • Alkali Resistant
  • Crystalline Semi
  • Dimensional stability Good
  • ...
Omnia Plastica
Akulon® PA66 by Omnia Plastica is a natural colored, hygroscopic, weatherproof, self-lubricating polyamide 66 (PA 66, Nylon 66) grade obtained by the polymerisation of hexamethylenediamine and... view more
Features
  • Alkali Resistant
  • Chemical resistance Good
  • Crystalline Semi
  • Food Contact Acceptable
  • ...
Omnia Plastica
Akulon® PA66.6 GX by Omnia Plastica is a black colored, U.V. stabilized, hygroscopic, self-lubricating polyamide 66-6 (PA 66-6, Nylon 66-6) copolymer grade. Possesses excellent mechanical features... view more
Features
  • Alkali Resistant
  • Chemical resistance Good
  • Copolymer
  • Friction Low
  • ...
Omnia Plastica
Akulon® PA6GF30 by Omnia Plastica is a black colored polyamide 6 (PA 6, Nylon 6) grade reinforced with 30% glass fiber and graphite. Exhibits excellent mechanical properties, high compression... view more
Features
  • Abrasion resistance High
  • Alkali Resistant
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Omnia Plastica
Akulon® PA6MG by Omnia Plastica is a self-lubricating, semi-crystalline, polyamide 6 (PA 6, Nylon 6) grade derived from Akulon 6 and modified by the addition of colorants and additives. Possesses... view more
Features
  • Abrasion resistance Good
  • Crystalline Semi
  • Fatigue Resistant
  • Lubricating Self
  • ...
Omnia Plastica
OMNIALITE PET TX LF by Omnia Plastica is a semi-crystalline, modified, self-lubricating, hard, physiologically inert acetal and polyethylene terephthalate (PET) copolymer grade. Possesses excellent... view more
Features
  • Copolymer
  • Crystalline Semi
  • Dimensional stability Good
  • Electrical Properties Good
  • ...
Omnia Plastica
Omniacetal POM C is a crystalline, natural and black colored polyoxymethylene (POM) grade. Is physiologically inert, provides good dimensional stability, compressive strength, low friction... view more
Features
  • Alkali Resistant
  • Compressive Strength Good
  • Crystalline
  • Dimensional stability Good
  • ...
Omnia Plastica
Omniamid PA6G is an amorphous, natural colored polyamide 6 cast grade produced by polymerization of the caprolactam directly in the mold. Provides stiffness, brittleness and toughness better than... view more
Features
  • Alkali Resistant
  • Amorphous
  • Compressive Strength Good
  • Fatigue Resistant
  • ...
Omnia Plastica
Omniamid PA6 G HS is an amorphous, heat stabilized, black or blue colored polyamide 6 grade. Is self-lubricating, has low coefficient of friction, machinable, provides good tensile stress... view more
Features
  • Abrasion resistance Good
  • Alkali Resistant
  • Amorphous
  • Compressive Strength Good
  • ...
Omnia Plastica
Omniamid PA6 G Oil is an amorphous, yellow colored polyamide 6 grade reinforced with high percentage of special lubricators. Is machinable, self-lubricating with coefficient of friction lowest of... view more
Features
  • Abrasion resistance Good
  • Alkali Resistant
  • Amorphous
  • Antistatic
  • ...
Omnia Plastica
Omniamid PA6 G WLF is an amorphous, red colored, solid lubricated polyamide 6 cast grade. Is self-lubricating, has low coefficient of friction, good tensile stress, compressive strength and is... view more
Features
  • Abrasion resistance Good
  • Alkali Resistant
  • Amorphous
  • Compressive Strength Good
  • ...
Omnia Plastica
Omniamid PA6 G HR is an amorphous, black colored polyamide 6 reinforced with graphite and a special lubricator. Is machinable, has low coefficient of friction, self lubricating, provides good... view more
Features
  • Abrasion resistance Good
  • Alkali Resistant
  • Amorphous
  • Compressive Strength Good
  • ...
Omnia Plastica
Omniamid PA6G MoS2 is an amorphous, grey colored polyamide 6 reinforced with molybdenum disulfide (MoS2). Is self-lubricating, has low coefficient of friction, machinable, good tensile stress... view more
Features
  • Abrasion resistance Good
  • Alkali Resistant
  • Amorphous
  • Compressive Strength Good
  • ...
Omnia Plastica
Omniatec PEEK is a semi-crystalline polyetheretherketone (PEEK) with high mechanical and thermal properties. Is self-lubricating and provides high dimensional stability, low friction coefficient... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalline Semi
  • ...
Omnia Plastica
Omniatec PSU is a semi-crystalline, physiologically inert polysufone (PSU) grade with high mechanical and thermal properties (up to 240°C). It is electrically insulating and possesses good tensile... view more
Features
  • Alkali Resistant
  • Chemical resistance Good
  • Creep Resistance Good
  • Crystalline Semi
  • ...
Omnia Plastica
PC is an amorphous, clear polycarbonate grade. Provides good dimensional stability, dielectric properties and exhibits high shock resistance even at low temperature. Used for electrical applications... view more
Features
  • Amorphous
  • Dimensional stability Good
  • Shock Absorbent
Omnia Plastica
RILSAN PA11 by Omnia Plastica is a natural colored, non-hygroscopic, physiologically inert, high price, self-lubricating polyamide 11 (PA 11, Nylon 11) grade derived from castor oil. Possesses good... view more
Features
  • Chemical resistance Good
  • Crystalline Semi
  • Electrical Properties Good
  • Food Contact Acceptable
  • ...
Acrylonitrile-butadiene-styrene is an amorphous thermopolymer used largely for injection moulded items. The stock shapes are mainly used for the production of prototypes.Features:Good machinability... view more
Polyamide obtained by the polymerisation of Hexamethylenediamine and Adipic acid. It is one of the oldest engineering plastics, having been created in the USA in 1930. Due to its origin it is widely... view more
Polyamide obtained by the polymerisation of Hexamethylenediamine and Adipic acid. It is one of the oldest engineering plastics, having been created in the USA in 1930. Due to its origin it is widely... view more
Copolymer of nylon with excellent mechanical features, it combines the good impact resistances of PA6 as well as the higher stiffness of PA66. For this reason it machines very well on automatic... view more
Copolymer of nylon with excellent mechanical features, it combines the good impact resistances of PA6 as well as the higher stiffness of PA66. For this reason it machines very well on automatic... view more
Cast Nylon 6 with the addition of 6% of special lubricating oil which remains in solution in the material. The unique method of production results in a micro distribution of oil particles with a... view more
Cast Nylon 6 with the addition of 6% of special lubricating oil which remains in solution in the material. The unique method of production results in a micro distribution of oil particles with a... view more
Arnite is a relatively new semi-crystalline polymer developed for technical applications. It is suitable for mechanical parts which require dimensional stability and a low friction coefficient... view more
The general features of homopolymer acetalic resin are similar to those of copolymer POM c, except that service temperature (under load) is slightly higher but resistance to hydrolysis and strong... view more
Polyoxymethylene, commonly called Acetal, is a crystalline polymer obtained from the polymerisation of formaldehyde. Discovered fairly recently (1960), it has enjoyed rapid growth and large... view more
Noryl is a resin based on polyphenylene oxide, modified with styrene. Its main field of application is the electrical one.Features:Good electrical properties, even at high frequency Dimensional... view more
Semi-crystalline polymer of polyamide obtained by the polymerisation of the caprolactam. Its large popularity is due to both its good overall features as well as its cost-performance relationship... view more
Semi-crystalline polymer of polyamide obtained by the polymerisation of the caprolactam. Its large popularity is due to both its good overall features as well as its cost-performance relationship... view more
Cast nylon 6. The method of production of this polyamide (i.e. the polymerisation of the caprolactam directly in the mould) allows the production of stock shapes in larger than normal dimensions... view more
Cast nylon 6. The method of production of this polyamide (i.e. the polymerisation of the caprolactam directly in the mould) allows the production of stock shapes in larger than normal dimensions... view more
Cast nylon 6 produced with the addition of graphite and a special lubricator which gives to this product better properties than natural PA6G. Whilst retaining the general features of OMNIAMID G it... view more
Cast nylon 6 produced with the addition of graphite and a special lubricator which gives to this product better properties than natural PA6G. Whilst retaining the general features of OMNIAMID G it... view more
The only engineering plastic of natural origin (derived from castor oil), it is a polyamide which, unlike the other nylons, does not absorb humidity. It has all the good mechanical features of... view more
Polyamide 6 reinforced with the addition of 30% glass fibre and graphite. The glass charge makes the material highly resistant to abrasion, compression and flexing. Akulon GF is particularly... view more
This amorphous polymer is commonly used for its high shock resistance even at low temperature. It is not a material recommended for mechanical applications, even if its dimensional stability does... view more
Polyethylene with a molecular weight of ± 1000,000 with excellent impact strength. PE 1000 is less rigid and has a higher shock resistance than the low molecular weight polyethylene and it is... view more
Molecular weight 300,000 polyethylene similar to the type 500 with higher rigidity and lower resistance to continuous shocks. The applications are similar to those of PE 500, being more commonly... view more
Polyethylene with a molecular weight of ± 500,000. PE 500 is more rigid than the high molecular weight polyethylene and it is therefore more suitable for mechanical applications. The friction... view more
Semicrystalline polymer. Material with high mechanical and thermal properties, up to 240°C. It resists to creep under load and to wear, its friction coefficient is low. The temperature resistance... view more
This high performance engineering plastic is a non-reinforced self-extinguishing amorphous polymer with high thermal, electrical and mechanical properties which are typical of a crystalline... view more
The mechanical features of PP are better than those of PE H.D. It withstands attack by alkali and acids and consequently it is widely used for components in the chemical industry when a moderate... view more
Crystalline polymer based on polyphenylene sulfide with the addition of 40% glass-fibre. Very high rigidity, stiffness and flexural strength. The temperature resistance is very high: up to 240° C... view more
It is a non-reinforced amorphous polymer whose main features are its high thermal, electrical and mechanical properties which are typical of a crystalline polymer. Compared to its "brother" PES it... view more
A Fluoropolymer used mainly for its excellent chemical resistance. It has poor mechanical features. The strain, even under low weight, makes it very suitable as a gasket material.Features:Chemical:... view more
A widely used material, its application is under regulation in many countries for ecological reasons and it is often substituted by PP or other polymers. It is chosen for its chemical... view more
PVDF is a relatively new fluoropolymer. Like the other fluoropolymers, its best feature is its chemical resistance. The mechanical features of PVDF are notably higher than PTFE and it does not... view more
Polyamide 6 reinforced with the addition of 30% glass fibre and graphite. The glass charge makes the material highly resistant to abrasion, compression and flexing. Akulon GF is particularly... view more
Silon Cable compounds
Back to Top