OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
223 products match your search
Product Name
Supplier
Description
Plaslube® ABS 7000 is an acrylonitrile butadiene styrene (ABS) grade. Exhibits low gloss, excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS 8002 is an acrylonitrile butadiene styrene (ABS) grade. Exhibits high heat resistance, excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS 8004 is a general purpose acrylonitrile butadiene styrene (ABS) grade. Exhibits high impact resistance, excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS 8004 FR is a flame retardant acrylonitrile butadiene styrene (ABS) grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Flame retarded
  • ...
Plaslube® ABS 8005 is an acrylonitrile butadiene styrene (ABS) grade. Exhibits high heat resistance, excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS 8006 is an acrylonitrile butadiene styrene (ABS) grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external lubes... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS 8007 is a general purpose acrylonitrile butadiene styrene (ABS) grade. Exhibits high flow, excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Flow High
  • ...
Plaslube® ABS 8008 is a general purpose acrylonitrile butadiene styrene (ABS) grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS 8009 FR is a flame retardant acrylonitrile butadiene styrene (ABS) grade. Exhibits high heat resistance, excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Flame retarded
  • ...
Plaslube® ABS 8010 is an acrylonitrile butadiene styrene (ABS) grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external lubes... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS 8011 is a platable acrylonitrile butadiene styrene (ABS) grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS 8012 is an acrylonitrile butadiene styrene (ABS) grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external lubes... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS 8014 is an acrylonitrile butadiene styrene (ABS) grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external lubes... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS 8015 CL is an acrylonitrile butadiene styrene (ABS) copolymer grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® ABS SL2 is a general purpose, lubricated acrylonitrile butadiene styrene (ABS) grade reinforced with silicone lubricant. Exhibits excellent wear resistance, low coefficient of friction... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS TL10 is a lubricated acrylonitrile butadiene styrene (ABS) grade reinforced with PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS TL2 is a lubricated acrylonitrile butadiene styrene (ABS) grade reinforced with PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS TX15 is a lubricated acrylonitrile butadiene styrene (ABS) grade reinforced with 15 % PTFE lubricant. Exhibits good wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® ABS/PBT 1000 is an Acrylonitrile butadiene styrene (ABS)/ Polybutylene Terephthalate (PBT) blend. It is suitable for processing by injection molding. Potential applications include... view more
Plaslube® ABS/PBT 1500 is an Acrylonitrile butadiene styrene (ABS)/ Polybutylene Terephthalate (PBT) blend. It is suitable for processing by injection molding. Potential applications include... view more
Plaslube® ABS/PBT BK is black colored Acrylonitrile butadiene styrene (ABS)/ Polybutylene Terephthalate (PBT) blend. It is suitable for processing by injection molding. Potential applications... view more
Plaslube® ABS/PBT GF/M40 FR is a flame retardant (UL94 V-0) Acrylonitrile butadiene styrene (ABS)/ Polybutylene Terephthalate (PBT) blend reinforced with 40% glass and 40% mineral fiber. It is... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Filled Mineral
Plaslube® ABS/PBT GF15 is an Acrylonitrile butadiene styrene (ABS)/ Polybutylene Terephthalate (PBT) blend reinforced with 15% glass fiber. It is suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
Plaslube® ABS/PBT GF20 is an Acrylonitrile butadiene styrene (ABS)/ Polybutylene Terephthalate (PBT) blend reinforced with 20% glass fiber. It is suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
Plaslube® ABS/PBT GF30 BK is a black colored Acrylonitrile butadiene styrene (ABS)/ Polybutylene Terephthalate (PBT) blend reinforced with 30% glass fiber. It is suitable for processing by injection... view more
Features
  • Filled Glass Fiber
Plaslube® AC-80/SI/2 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 2 % silicone lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® AC-80/TF/10 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 10 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® AC-80/TF/10 NAT is a polyoxymethylene (POM) copolymer grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external lubes... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® AC-80/TF/15 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 15 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® AC-80/TF/2 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 2 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® AC-80/TF/20 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 20 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® AC-80/TF/20 BK1941 is a polyoxymethylene (POM) copolymer grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® AC-80/TF/20 NAT is a polyoxymethylene (POM) copolymer grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external lubes... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® AC-80/TF/22 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 22 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® AC-80/TF/30 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 30 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® AC-80/TF/5 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 5 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® AC-81/SI/2 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 2 % lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® AC-81/TF/15 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 15 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® AC-81/TF/15 NAT is a polyoxymethylene (POM) homopolymer grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external lubes... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® AC-81/TF/20/Natl is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 20 % lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Techmer PM
Plaslube® Actrn is a polyoxymethylene (POM) homopolymer grade lubricated with a binary polymer lubricant blend. Exhibits self-lubricating property, excellent wear resistance, low coefficient of... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Techmer PM
Plaslube® GS-71 is a gray colored polyamide PA 6/12 grade lubricated with molybdenum disulfide. Can be processed by injection molding and used in automotive applications like connectors, seals... view more
Features
  • Lubricated
Plaslube® HO TL15 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 15 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® HTN 01400 BK is a black colored, heat stabilized, lubricated unspecified thermoplastic grade. Is suitable for processing by injection molding. Potential applications include automotive... view more
Features
  • Heat stabilized
  • Lubricated
Plaslube® HTN 01410 BK is a black colored unspecified thermoplastic grade added with molybdenum disulfide lubricant. Exhibits low friction, good wear and heat resistance. Is suitable for processing... view more
Features
  • Friction Low
  • Heat Resistance Good
  • Lubricated
  • Wear resistance Good
Plaslube® HTN 05007 is a black colored, heat stabilized, lubricated unspecified thermoplastic grade. Is suitable for processing by injection molding. Potential applications include automotive... view more
Features
  • Heat stabilized
  • Lubricated
Plaslube® J-4/30/TF/13/SI/2 BK223 is a polyamide PA 6/12 grade. Is suitable for processing by injection molding. Potential applications include automotive door-lock mechanisms & seat adjustment... view more
Plaslube® J-4/30/TF/13/SI/2 NAT is a polyamide PA 6/12 grade. Is suitable for processing by injection molding. Potential applications include automotive door-lock mechanisms & seat adjustment... view more
Plaslube® J-4/35/TF/15 NAT is a polyamide PA 6/12 grade. Is suitable for processing by injection molding. Potential applications include automotive door-lock mechanisms & seat adjustment assemblies... view more
Plaslube® J-50/10/TF/15 is an internally lubricated, RoHS complaint polycarbonate grade filled with 10% glass fiber by weight and 15% PTFE (polytetrafluoroethylene). Exhibits good dimensional... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • Friction Low
  • ...
Plaslube® J-50/10/TF/15 BK223 is an internally lubricated polycarbonate grade. It improves wear resistance by lowering coefficient of friction on the surface of molded parts. This results in... view more
Features
  • Abrasion resistance High
  • Creep Resistance Good
  • Dimensional stability Good
  • Fatigue Resistant
  • ...
Plaslube® J-50/10/TF/15 NAT is an internally lubricated polycarbonate grade. It improves wear resistance by lowering coefficient of friction on the surface of molded parts. This results in extended... view more
Features
  • Abrasion resistance High
  • Creep Resistance Good
  • Dimensional stability Good
  • Fatigue Resistant
  • ...
Plaslube® J-50/30/TF/15 is an internally lubricated, RoHS complaint polycarbonate grade filled with 30% glass fiber by weight and 15% PTFE (polytetrafluoroethylene). Exhibits good dimensional... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • Friction Low
  • ...
Plaslube® J-80/20/TF/15 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 20 % glass fiber and 15 % PTFE lubricant. Exhibits good chemical resistance, good stiffness, excellent... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Copolymer
  • Creep Resistance High
  • ...
Plaslube® J-80/20/TF/15 BK223 is a polyoxymethylene (POM) copolymer grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® J-80/20/TF/15 NAT is a polyoxymethylene (POM) copolymer grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external lubes... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® NY-6/MS/M is a polyamide PA 12 grade. Can be processed by injection molding. Potential applications include automotive door-lock mechanisms & seat adjustment assemblies in cars... view more
Plaslube® PA11 GF30 TL20 LE is a heat stabilized and PTFE lubricated Polyamide 11 (PA11) grade reinforced with 30% glass fiber. Possesses low friction, exhibits good wear resistance and low... view more
Features
  • Friction Low
  • Heat stabilized
  • Lubricated
  • Wear resistance Good
Plaslube® PA12 TS18 is a polyamide PA 12 grade lubricated with 18% PTFE and 2% silicone. Is suitable for processing by injection molding. Potential applications include automotive door-lock... view more
Features
  • Lubricated
Plaslube® PA4/6 CF30 TL10 is a black colored polyamide PA 4/6 grade reinforced with 30 % carbon fiber and 10 % PTFE lubricant. Can be processed by injection molding. Potential applications include... view more
Features
  • Filled Carbon fiber
  • Lubricated
Plaslube® PA4/6 CF30 TL15 is a low friction polyamide PA 4/6 grade lubricated with 30 % carbon fiber and 15 % PTFE. Is suitable for processing by injection molding and offers good wear resistance... view more
Features
  • Friction Low
  • Lubricated
  • Wear resistance Good
Plaslube® PA4/6 GF30 TL15 is a heat stabilized polyamide PA 4/6 grade reinforced with 30 % glass fiber and PTFE lubricant. Is suitable for processing by injection molding. Potential applications... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Plaslube® PA4/6 GF33 TL15 is a heat stabilized polyamide PA 4/6 grade reinforced with 33 % glass fiber and PTFE. Is suitable for processing by injection molding. Potential applications include... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Plaslube® PA4/6 HS L BK is a black colored, heat stabilized, lubricated polyamide PA 4/6 grade. Is suitable for processing by injection molding. Potential applications include automotive door-lock... view more
Features
  • Heat stabilized
  • Lubricated
Plaslube® PA4/6 TL15 HS is a heat stabilized, low friction polyamide PA 4/6 grade lubricated with 15 % PTFE. Is suitable for processing by injection molding and offers good wear resistance... view more
Features
  • Friction Low
  • Heat stabilized
  • Lubricated
  • Wear resistance Good
Plaslube® PA6 CF30 TL15 BK is a polyamide 6 (PA6) resin reinforced with 30% carbon fiber and lubricated with 15% polytetrafluoroethylene (PTFE). Exhibits good wear resistance and low friction. It is... view more
Features
  • Filled Carbon fiber
  • Friction Low
  • Lubricated
  • Wear resistance Good
Plaslube® PA6 CF30 TS15 BK is a polyamide 6 (PA6) resin reinforced with 30% carbon fiber and lubricated with silicone and 15% polytetrafluoroethylene (PTFE). Exhibits good wear resistance and low... view more
Features
  • Filled Carbon fiber
  • Friction Low
  • Lubricated
  • Wear resistance Good
Plaslube® PA6 GF10 TL10 is a heat stabilized polyamide 6 (PA6) resin reinforced with 10% glass fiber and lubricated with polytetrafluoroethylene (PTFE). It is suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Plaslube® PA6 GF15 TL15 is a polyamide 6 (PA6) resin reinforced with 15% glass fiber and lubricated with 15% polytetrafluoroethylene (PTFE). Is a heat stabilized grade exhibiting good wear... view more
Features
  • Filled Carbon fiber
  • Friction Low
  • Heat stabilized
  • Lubricated
  • ...
Plaslube® PA6 GF20 RM BK is a polyamide 6 (PA6) resin reinforced with glass fiber. It is suitable for processing by injection molding and can be used in manufacturing of automotive parts like... view more
Features
  • Filled Glass Fiber
Plaslube® PA6 GF20 RM L BK is a lubricated polyamide 6 (PA6) resin reinforced with 20% glass fiber exhibiting low moisture absorption. It is suitable for processing by injection molding and can be... view more
Features
  • Filled Glass Fiber
  • Lubricated
  • Moisture Absorption Low
Plaslube® PA6 GF30 RM BK is a polyamide 6 (PA6) resin reinforced with glass fiber. It is suitable for processing by injection molding and can be used in manufacturing of automotive parts like... view more
Features
  • Filled Glass Fiber
Plaslube® PA6 GF30 TL15 is a polyamide 6 (PA6) resin reinforced with 30% glass fiber and lubricated with 15% polytetrafluoroethylene (PTFE). Is a heat stabilized grade exhibiting good wear... view more
Features
  • Filled Glass Fiber
  • Friction Low
  • Heat stabilized
  • Lubricated
  • ...
Plaslube® PA6 GF40 ML2 HS UV BK is a polyamide 6 (PA6) resin reinforced with 40% glass fiber and lubricated with molybdenum disulfide. Is a UV- and heat stabilized grade exhibiting good UV... view more
Features
  • Filled Glass Fiber
  • Lubricated
  • UV Resistance Good
  • UV Stabilized
Plaslube® PA6 GF40 ML5 HS 12MM is a heat stabilized polyamide 6 (PA6) resin reinforced with 40% glass fiber and lubricated with molybdenum disulfide. It is suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Plaslube® PA6 GF40 TL20 BK is a polyamide 6 (PA6) resin reinforced with 40% glass fiber and lubricated with 20% polytetrafluoroethylene (PTFE). It is suitable for processing by injection molding and... view more
Features
  • Filled Glass Fiber
  • Lubricated
Plaslube® PA6 GL10 is a polyamide 6 (PA6) resin lubricated with 10% graphite powder. It is suitable for processing by injection molding and can be used in manufacturing of automotive parts like... view more
Features
  • Lubricated
Plaslube® PA6 GL15 is a polyamide 6 (PA6) resin lubricated with 15% graphite powder. It is suitable for processing by injection molding and can be used in manufacturing of automotive parts like... view more
Features
  • Lubricated
Plaslube® PA6 HS L MB is a heat stabilized, lubricated polyamide 6 (PA6) resin. It is suitable for processing by injection molding and can be used in manufacturing of automotive parts like door-lock... view more
Features
  • Heat stabilized
  • Lubricated
Plaslube® PA6 ML2 is a polyamide 6 (PA6) resin lubricated with 2% molybdenum disulfide. Exhibits good wear resistance and low friction. It is suitable for processing by injection molding and can be... view more
Features
  • Friction Low
  • Lubricated
  • Wear resistance Good
Plaslube® PA6 ML2 HS BK is a polyamide 6 (PA6) resin lubricated with 2% molybdenum disulfide. Is a heat stabilized grade exhibiting good wear resistance and low friction. It is suitable for... view more
Features
  • Friction Low
  • Heat stabilized
  • Lubricated
  • Wear resistance Good
Plaslube® PA6 ML3 BK is a polyamide 6 (PA6) resin lubricated with 2% molybdenum disulfide. Is a heat stabilized grade exhibiting good wear resistance and low friction. It is suitable for processing... view more
Features
  • Friction Low
  • Heat stabilized
  • Lubricated
  • Wear resistance Good
Plaslube® PA6 TL10 is a heat stabilized polyamide 6 (PA6) resin lubricated with 10% PTFE. It is suitable for processing by injection molding and can be used in manufacturing of automotive parts like... view more
Features
  • Heat stabilized
  • Lubricated
Plaslube® PA6 TL15 is a heat stabilized polyamide 6 (PA6) resin lubricated with 15% PTFE. It is suitable for processing by injection molding and can be used in manufacturing of automotive parts like... view more
Features
  • Heat stabilized
  • Lubricated
Plaslube® PA6 TL25 is a heat stabilized polyamide 6 (PA6) resin lubricated with 25% PTFE. It is suitable for processing by injection molding and can be used in manufacturing of automotive parts like... view more
Features
  • Heat stabilized
  • Lubricated
Plaslube® PA6 TS15 BK is a heat stabilized polyamide 6 (PA6) resin lubricated with PTFE and silicone. It is suitable for processing by injection molding and can be used in manufacturing of... view more
Features
  • Heat stabilized
  • Lubricated
Plaslube® PA6 TS18 is a polyamide 6 (PA6) resin lubricated with 18% PTFE and silicone. It is suitable for processing by injection molding and can be used in manufacturing of automotive parts like... view more
Features
  • Lubricated
Plaslube® PA6 TSX15 is a polyamide 6 (PA6) resin lubricated with 18% PTFE and silicone exhibiting good wear resistance. It is suitable for processing by injection molding and can be used in... view more
Features
  • Lubricated
  • Wear resistance Good
Plaslube® PA6 TX10 is a polyamide 6 (PA6) resin lubricated with 10% PTFE exhibiting good wear resistance. It is suitable for processing by injection molding and can be used in manufacturing of... view more
Features
  • Lubricated
  • Wear resistance Good
Plaslube® PA6/10 BK is a black colored Polyamide 610 (PA6/10) grade. It is suitable for processing by injection molding. Potential applications include manufacturing of automotive parts like panel... view more
Plaslube® PA6/10 GF30 TS15 is a PTFE and silicone lubricated Polyamide 610 (PA6/10) grade reinforced with glass fiber. Exhibits good wear resistance and is suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Lubricated
  • Wear resistance Good
Plaslube® PA6/12 01430 is a low friction, polyamide 6/12 grade lubricated with molybdenum disulfide. Is suitable for processing by injection molding and offers good wear resistance. Potential... view more
Features
  • Friction Low
  • Lubricated
  • Wear resistance Good
Plaslube® PA6/12 GF30 TS15 BK by Techmer PM is a black colored, heat stabilized polyamide 6-12 (PA 6-12) copolymer grade available in the form of pellets and reinforced with glass fiber... view more
Features
  • Copolymer
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Plaslube® PA6/12 GF33 1000 BK is a heat stabilized, lubricated polyamide PA 6/12 grade reinforced with 33 % glass fiber. Is suitable for processing by injection molding. Potential applications... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Plaslube® PA6/12 GF33 1001 BK is a heat stabilized polyamide PA 6/12 grade reinforced with 33 % glass fiber and molybdenum disulfide lubricant. Is suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Plaslube® PA6/66 109 L is a lubricated Polyamide66/6 (PA66/PA6) copolymer grade. It is suitable for processing by injection molding. Potential applications include manufacturing of automotive parts... view more
Features
  • Lubricated
Plaslube® PA6/66 GF50 HS L is a heat stabilized and lubricated Polyamide66/6 (PA66/PA6) copolymer grade reinforced with glass fiber. It is suitable for processing by injection molding. Potential... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Plaslube® PA6/66 GF60 HS L is a heat stabilized and lubricated Polyamide66/6 (PA66/PA6) copolymer grade reinforced with glass fiber. It is suitable for processing by injection molding. Potential... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Lubricated
Plaslube® PA6/66 IM HS L is a heat stabilized and lubricated Polyamide66/6 (PA66/PA6) copolymer grade. Exhibits high impact resistance and is suitable for processing by injection molding. Potential... view more
Features
  • Heat stabilized
  • Impact modified
  • Lubricated
Plaslube® PA6/66 L N is a lubricated and nucleated Polyamide66/6 (PA66/PA6) copolymer grade. Is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Features
  • Lubricated
  • Nucleated
Plaslube® PBT GB30 TL15 is a polytetrafluoroethylene (PTFE) lubricated Polybutylene terephthalate (PBT) grade reinforced with 30% glass bead. It is suitable for processing by injection molding and... view more
Features
  • Filled Glass Fiber
  • Lubricated
Plaslube® PC 02000 is a lubricated polycarbonate grade. It improves wear resistance by lowering coefficient of friction on the surface of molded parts. This results in extended life expectancy... view more
Features
  • Abrasion resistance High
  • Creep Resistance Good
  • Dimensional stability Good
  • Fatigue Resistant
  • ...
Plaslube® J-50/30/TF/15 is a lubricated PTFE (polytetrafluoroethylene) filled polycarbonate grade reinforced with 10% carbon fiber by weight. Exhibits low noise, reduced slip-stick nature and... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Filled Carbon fiber
  • Friction Low
  • ...
Plaslube® PC CF10 TL15 FR BK is a flame retardant, lubricated PTFE (polytetrafluoroethylene) filled polycarbonate grade reinforced with 10% carbon fiber by weight. Exhibits low noise, reduced... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Filled Carbon fiber
  • Flame retarded
  • ...
Plaslube® PC CF15 TL6 BK is a lubricated PTFE (polytetrafluoroethylene) filled polycarbonate grade reinforced with 10% carbon fiber by weight. Exhibits low noise, reduced slip-stick nature and... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Filled Carbon fiber
  • Friction Low
  • ...
Plaslube® PC GF10 TS15 BK is a lubricated PTFE (polytetrafluoroethylene) and silicone filled polycarbonate grade reinforced with 10% glass fiber by weight. Exhibits low noise, reduced slip-stick... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • Friction Low
  • ...
Plaslube® PC GF20 TL10 BK is a lubricated PTFE (polytetrafluoroethylene) filled polycarbonate grade reinforced with 20% glass fiber by weight. Exhibits low noise, reduced slip-stick nature and... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • Friction Low
  • ...
Plaslube® PC GF30 TL15 is a lubricated PTFE (polytetrafluoroethylene) filled polycarbonate grade reinforced with 30% glass fiber by weight. Exhibits low noise, reduced slip-stick nature and enhanced... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • Friction Low
  • ...
Plaslube® PC GF30 TS15 BK is a lubricated PTFE (polytetrafluoroethylene) and silicone filled polycarbonate grade reinforced with 30% glass fiber by weight. Exhibits low noise, reduced slip-stick... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • Friction Low
  • ...
Plaslube® PC TL15 is a lubricated PTFE (polytetrafluoroethylene) filled polycarbonate grade. Exhibits low noise, reduced slip-stick nature and enhanced abrasion resistance. Improves wear resistance... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Lubricated
  • ...
Plaslube® PC-50/TF/13/SI/2 is a lubricated polycarbonate grade filled with 13% PTFE (polytetrafluoroethylene) and 2% silicone. Exhibits low noise, reduced slip-stick nature and enhanced abrasion... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Lubricated
  • ...
Plaslube® PC-50/TF/13/SI/2 BK3585 is a polycarbonate grade. Exhibits low noise, reduced slip-stick nature and enhanced abrasion resistance. Improves wear resistance by lowering the coefficient of... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Noise Damping
  • ...
Plaslube® PC-50/TF/13/SI/2 NAT is a polycarbonate grade. Exhibits low noise, reduced slip-stick nature and enhanced abrasion resistance. Improves wear resistance by lowering the coefficient of... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Noise Damping
  • ...
Plaslube® PC-50/TF/13/SI/2 WT8966 is a polycarbonate grade. Exhibits low noise, reduced slip-stick nature and enhanced abrasion resistance. Improves wear resistance by lowering the coefficient of... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Noise Damping
  • ...
Plaslube® PC-50/TF/15 is a lubricated polycarbonate grade filled with 15% PTFE (polytetrafluoroethylene). It has a pleasing surface appearance. Exhibits good dimensional stability, good toughness... view more
Features
  • Abrasion resistance High
  • Appearance Pleasing Surface
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® PC-50/TF/15 BK223 is a polycarbonate grade. Exhibits low noise, reduced slip-stick nature and enhanced abrasion resistance. Improves wear resistance by lowering the coefficient of friction... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Noise Damping
  • ...
Plaslube® PC-50/TF/15 NAT is a polycarbonate grade. Exhibits low noise, reduced slip-stick nature and enhanced abrasion resistance. Improves wear resistance by lowering the coefficient of friction... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Noise Damping
  • ...
Plaslube® PC-50/TF/15 is a lubricated polycarbonate grade filled with 15% PTFE (polytetrafluoroethylene). It has a pleasing surface appearance. Exhibits good dimensional stability, good toughness... view more
Features
  • Abrasion resistance High
  • Appearance Pleasing Surface
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® PC-50/TF/22 BK223 is a polycarbonate grade. Exhibits low noise, reduced slip-stick nature and enhanced abrasion resistance. Improves wear resistance by lowering the coefficient of friction... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Noise Damping
  • ...
Plaslube® PC-50/TF/22 NAT is a polycarbonate grade. Exhibits low noise, reduced slip-stick nature and enhanced abrasion resistance. Improves wear resistance by lowering the coefficient of friction... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Noise Damping
  • ...
Plaslube® PC/ PET IM 1012 is an impact modified Polycarbonate (PC)/ Polyethylene terephthalate (PET) grade. Exhibits high impact resistance and is suitable for processing by injection molding... view more
Features
  • Impact modified
  • Impact resistance High
Plaslube® PC/ PET IM 1016 UV is an impact modified and UV stabilized Polycarbonate (PC)/ Polyethylene terephthalate (PET) grade. Exhibits good UV resistance and shows high impact resistance. It is... view more
Features
  • Impact modified
  • UV Stabilized
Plaslube® PC/ABS 1000 is a Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. It is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Plaslube® PC/ABS 1110 is a Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. It is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Plaslube® PC/ABS 1950 is a Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. It is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Plaslube® PC/ABS 2002 is a Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. Possesses low gloss and is suitable for processing by injection molding. Potential applications include... view more
Features
  • Gloss Low
Plaslube® PC/ABS 2110 BK is a black colored Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. It is suitable for processing by injection molding. Potential applications include... view more
Plaslube® PC/ABS 720 BK is a Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. It is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Plaslube® PC/ABS 8001A is a Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. It is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Plaslube® PC/ABS 830 is a Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. It is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Plaslube® PC/ABS 88 GF10 is a Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend reinforced with 10% glass fiber. It is suitable for processing by injection molding. Potential... view more
Features
  • Filled Glass Fiber
Plaslube® PC/ABS 8800 is a Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. Exhibits high impact resistance and is suitable for processing by profile extrusion. Potential... view more
Features
  • Impact resistance High
Plaslube® PC/ABS EP is a Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. Is platable and is suitable for processing by injection molding. Potential applications include... view more
Features
  • Platable
Plaslube® PC/ABS FR 1950 BK is a black colored, flame retardant (UL94 5VA) Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. It is suitable for processing by injection molding... view more
Features
  • Flame retarded
Plaslube® PC/ABS FR 2810 is a flame retardant (UL94 V-0) Polycarbonate (PC)/ Acrylonitrile butadiene styrene (ABS) blend. It is suitable for processing by injection molding. Potential applications... view more
Features
  • Flame retarded
Plaslube® PC/PBT IM 5220 BK is an impact modified and UV stabilized Polycarbonate (PC)/ Polybutylene terephthalate (PBT) blend. Exhibits high impact resistance and is suitable for processing by... view more
Features
  • Impact modified
  • Impact resistance High
  • UV Stabilized
Plaslube® PC/PBT IM 5230 is an impact modified Polycarbonate (PC)/ Polybutylene terephthalate (PBT) blend. Exhibits high impact resistance and is suitable for processing by injection molding... view more
Features
  • Impact modified
  • Impact resistance High
Plaslube® PC/PBT IM 5720 A BK is an impact modified and UV stabilized Polycarbonate (PC)/ Polybutylene terephthalate (PBT) blend. Exhibits high impact resistance and is suitable for processing by... view more
Features
  • Impact modified
  • Impact resistance High
  • UV Stabilized
Plaslube® PE 4000 is an ultra high molecular weight polyethylene (UHMWPE) grade. Is suitable for processing by injection molding. Potential applications include manufacturing of automotive parts... view more
Plaslube® PE 4000 AS is a antistatic ultra high molecular weight polyethylene (UHMWPE) grade. Is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Features
  • Antistatic
Plaslube® PE 4000 LE is an ultra high molecular weight polyethylene (UHMWPE) grade. Contains low extractables and is suitable for processing by injection molding. Potential applications include... view more
Plaslube® PE 5900 is a lubricated ultra high molecular weight polyethylene (UHMWPE) grade. Is suitable for processing by injection molding. Potential applications include manufacturing of automotive... view more
Features
  • Lubricated
Plaslube® PE 5903 is a lubricated ultra high molecular weight polyethylene (UHMWPE) grade. Shows good wear resistance and low friction. Is suitable for processing by injection molding. Potential... view more
Features
  • Friction Low
  • Lubricated
  • Wear resistance Good
Plaslube® PEEK 1041 A is a lubricated Polyetheretherketone (PEEK) grade. Possesses high viscosity and is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Features
  • Lubricated
  • Viscosity High
Plaslube® PEEK 13004 is a lubricated Polyetheretherketone (PEEK) grade. Possesses high viscosity and is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Features
  • Lubricated
  • Viscosity High
Plaslube® PEEK 13005 is a lubricated Polyetheretherketone (PEEK) grade. Possesses high viscosity and is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Features
  • Lubricated
  • Viscosity High
Plaslube® PEEK 6112 is a lubricated Polyetheretherketone (PEEK) grade. It is suitable for processing by injection molding and potential applications include manufacturing of automotive parts like... view more
Features
  • Lubricated
Plaslube® PEEK CF10 GL10 TL10 A HF is a lubricated Polyetheretherketone (PEEK) grade. Possesses high flow and is suitable for processing by injection molding. Potential applications include... view more
Features
  • Flow High
  • Lubricated
Plaslube® PEEK CF10 TL10 GL10 A is a lubricated Polyetheretherketone (PEEK) grade reinforced with glass and carbon fiber. It is suitable for processing by injection molding. Potential applications... view more
Features
  • Filled Carbon fiber
  • Filled Glass Fiber
  • Lubricated
Plaslube® PEEK CF10 TL10 GL10 LE is a lubricated Polyetheretherketone (PEEK) grade reinforced with glass and carbon fiber. It is suitable for processing by injection molding. Potential applications... view more
Features
  • Filled Carbon fiber
  • Filled Glass Fiber
  • Lubricated
Plaslube® PEEK CF10 TL10 HF LE is a lubricated Polyetheretherketone (PEEK) grade reinforced with glass and carbon fiber. It is suitable for processing by injection molding. Potential applications... view more
Features
  • Filled Carbon fiber
  • Filled Glass Fiber
  • Lubricated
Plaslube® PEEK CF10 TL15 HF is a lubricated Polyetheretherketone (PEEK) grade reinforced with carbon fiber. Possesses high flow and is suitable for processing by injection molding. Potential... view more
Features
  • Filled Carbon fiber
  • Flow High
  • Lubricated
Plaslube® PEEK CF15 T/GL15 A is a lubricated Polyetheretherketone (PEEK) grade reinforced with carbon and glass fiber. It is suitable for processing by injection molding. Potential applications... view more
Features
  • Filled Carbon fiber
  • Filled Glass Fiber
  • Lubricated
Plaslube® PEEK CF15 TL15 A is a lubricated Polyetheretherketone (PEEK) grade reinforced with carbon fiber. Possesses high flow and is suitable for processing by injection molding. Potential... view more
Features
  • Filled Carbon fiber
  • Flow High
  • Lubricated
Plaslube® PEEK CF15 TL15 A 907 BK MB is a Polyetheretherketone (PEEK) grade reinforced with carbon fiber. It is suitable for processing by injection molding. Potential applications include... view more
Features
  • Filled Carbon fiber
Plaslube® PEEK CF15 TL15 A HF is a lubricated Polyetheretherketone (PEEK) grade reinforced with carbon fiber. Possesses high flow and is suitable for processing by injection molding. Potential... view more
Features
  • Filled Carbon fiber
  • Flow High
  • Lubricated
Plaslube® PEEK CF20 TL15 HF is a lubricated Polyetheretherketone (PEEK) grade reinforced with 20% carbon fiber. It offers high flow and is suitable for processing by injection molding. Potential... view more
Features
  • Filled Carbon fiber
  • Flow High
  • Lubricated
Plaslube® PEEK CF30 1011 A by Techmer Engineered Solutions Techmer PM is a lubricated Polyetheretherketone (PEEK) grade reinforced with 20% carbon fiber. It offers high flow and is suitable for... view more
Features
  • Filled Carbon fiber
  • Flow High
  • Lubricated
Plaslube® PEEK CF35 TL5 A is a lubricated Polyetheretherketone (PEEK) grade reinforced with carbon fiber. It is suitable for processing by injection molding. Potential applications include... view more
Features
  • Filled Carbon fiber
  • Lubricated
Plaslube® PEEK CTG30 A 002 is a graphite powder and polytetrafluoroethylene (PTFE) lubricated Polyetheretherketone (PEEK) grade. It is suitable for processing by injection molding. Potential... view more
Features
  • Filled Carbon fiber
  • Lubricated
Plaslube® PEEK GF10 1001A is a perfluoropolyether (PFPE) lubricated Polyetheretherketone (PEEK) grade reinforced with 10% glass fiber. Possesses high flow and is suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Flow High
  • Lubricated
Plaslube® PEEK T/GL20 is a lubricated Polyetheretherketone (PEEK) grade reinforced with glass fiber. It is suitable for processing by injection molding. Potential applications include manufacturing... view more
Features
  • Filled Glass Fiber
  • Lubricated
Plaslube® PEEK TL10 A is a polytetrafluoroethylene (PTFE) lubricated Polyetheretherketone (PEEK) grade. It is suitable for processing by injection molding. Potential applications include... view more
Features
  • Lubricated
Plaslube® PEEK TL15 A is a polytetrafluoroethylene (PTFE) lubricated Polyetheretherketone (PEEK) grade. It is suitable for processing by injection molding. Potential applications include... view more
Features
  • Lubricated
Plaslube® PEEK TL20 A is a polytetrafluoroethylene (PTFE) lubricated Polyetheretherketone (PEEK) grade. It is suitable for processing by injection molding. Potential applications include... view more
Features
  • Lubricated
Plaslube® PEI CF30 TL15 is a PTFE lubricated polyether imide(PI) grade reinforced with 30% carbon fiber. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled Carbon fiber
  • ...
Plaslube® PEI GF30 TL15 BK is a 15% PTFE lubricated polyether imide(PI) grade reinforced with 30% glass fiber. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
Plaslube® PES GF20 TL15 LE is a PTFE lubricated polyethersulfone (PESU) grade reinforced with 20% glass fiber. Contains low extractable and is suitable for processing by injection molding. Potential... view more
Features
  • Filled Glass Fiber
  • Lubricated
Plaslube® PES GF30 TL15 is a 15% PTFE lubricated polyethersulfone (PESU) grade reinforced with 30% glass fiber. Is suitable for processing by injection molding. Potential applications include... view more
Features
  • Filled Glass Fiber
  • Lubricated
Plaslube® POM CO AF15 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 15 % aramid resin lubricant. Exhibits good wear resistance, low friction, low noise, reduced slip-stick... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO CF10 TL10 BK is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 10 % carbon fiber and 10 % PTFE lubricant. Exhibits good wear resistance, low coefficient of... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO E TL20 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with PTFE lubricant. Exhibits good wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO GF10 SL2 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 10 % glass fiber and 2 % silicone lubricant. Exhibits good wear resistance, low coefficient of... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO GF10 TL10 BK is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 10 % glass fiber and 10 % PTFE lubricant. Exhibits good wear resistance, low friction, low noise... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO GF10 TX15 BK is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 10 % glass fiber and 10 % PTFE lubricant. Exhibits good wear resistance, low friction, low noise... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO GF20 TL15 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 20 % glass fiber and 15 % PTFE lubricant. Exhibits good wear resistance, low friction, low noise... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO GF20 TL20 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 20 % glass fiber and 20 % PTFE lubricant. Exhibits good wear resistance, low coefficient of... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO GF25 TL5 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 25 % glass fiber and 5 % PTFE lubricant. Exhibits good wear resistance, low coefficient of friction... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO GF30 TL5 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 30 % glass fiber and 5 % PTFE lubricant. Exhibits good wear resistance, low coefficient of friction... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO GF5 TL5 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 5.0 % glass fiber and PTFE lubricant. Exhibits good wear resistance, low coefficient of friction, low... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO GM30 TL5 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 30 % milled glass fiber and 5 % PTFE lubricant. Exhibits good wear resistance, low friction, low... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO SL2 MB is a lubricated polyoxymethylene (POM) copolymer grade reinforced with silicone lubricant. Exhibits good wear resistance, low friction, low noise, reduced slip-stick... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO TL10 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 10 % PTFE lubricant. Exhibits good wear resistance, low friction, low noise, reduced slip-stick... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO TL15 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 15 % PTFE lubricant. Exhibits good wear resistance, low friction, low noise, reduced slip-stick... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO TL2 MB is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 2 % PTFE lubricant. Exhibits good wear resistance, low friction, low noise, reduced slip-stick... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO TL20 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 20 % PTFE lubricant. Exhibits good wear resistance, low friction, low noise, reduced slip-stick... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO TS20 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 20 % PTFE and silicone lubricant. Exhibits good wear resistance, low friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO TS20 LE is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 20 % PTFE lubricant and silicone lubricant. Exhibits low extractables, good wear resistance, low... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO TX10 is a lubricated polyoxymethylene (POM) copolymer grade reinforced with 10 % PTFE lubricant. Exhibits good wear resistance, low friction, low noise, reduced slip-stick... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO UV is a UV stabilized polyoxymethylene (POM) copolymer grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO UV BK is a UV stabilized polyoxymethylene (POM) copolymer grade. Exhibits good wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO X is a lubricated polyoxymethylene (POM) copolymer grade. Exhibits good wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external lubes... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM CO X MB is a lubricated polyoxymethylene (POM) copolymer grade. Exhibits good wear resistance, low friction, low noise, reduced slip-stick, elimination of external lubes and enhanced... view more
Features
  • Abrasion resistance Good
  • Copolymer
  • Creep Resistance High
  • Dimensional stability Good
  • ...
Plaslube® POM HO CF10 TL20 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 10 % carbon fiber and 20 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled Carbon fiber
  • ...
Plaslube® POM HO CF20 TL10 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 20 % carbon fiber and 10 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled Carbon fiber
  • ...
Plaslube® POM HO CF20 TL15 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 20 % carbon fiber and 15 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled Carbon fiber
  • ...
Plaslube® POM HO CF20 TL20 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 20 % carbon fiber and 20 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled Carbon fiber
  • ...
Plaslube® POM HO E TL20 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 20 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® POM HO GF10 TL20 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 10 % glass fiber and 20 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
Plaslube® POM HO GF13 TL10 UV is a UV stabilized, lubricated polyoxymethylene (POM) homopolymer grade reinforced with 13 % glass fiber and 10 % PTFE lubricant. Exhibits good UV resistance, excellent... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
Plaslube® POM HO GF20 TL20 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 20 % glass fiber and 20 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
Plaslube® POM HO TL10 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 15 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® POM HO TL15 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 15 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® POM HO TL2 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 2 % PTFE lubricant. Exhibits good wear resistance, low coefficient of friction, low noise, reduced... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® POM HO TL20 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 20 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® POM HO TL20 BK is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 20 % PTFE lubricant. Exhibits excellent wear resistance, low coefficient of friction, low noise... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® POM HO TL20 BN042 is a lubricated polyoxymethylene (POM) homopolymer grade reinforced with 20 % PTFE lubricant. It is available as brown, red and in natural color. Exhibits excellent wear... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Filled
  • ...
Plaslube® PPA AL20 HS L is a lubricated polyphthalamide grade. Exhibits low noise, reduced slip-stick nature and enhanced abrasion resistance. Improves wear resistance by lowering the coefficient of... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Impact resistance High
  • ...
Plaslube® PPA CF30 TL10 is a PTFE (10%) lubricated polyphthalamide grade filled with 30% carbon fiber. Exhibits low noise, reduced slip-stick nature, high heat resistance and enhanced abrasion... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Heat Resistance High
  • ...
Plaslube® PPA CF30 TL15 is a PTFE (15%) lubricated polyphthalamide grade filled with 30% carbon fiber. Exhibits low noise, reduced slip-stick nature, high heat resistance and enhanced abrasion... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Friction Low
  • Heat Resistance High
  • ...
Plaslube® PPA GF30 TL15 is a PTFE (15%) lubricated polyphthalamide grade filled with 30% glass fiber. Exhibits low noise, reduced slip-stick nature, high heat resistance and enhanced abrasion... view more
Features
  • Abrasion resistance High
  • Dimensional stability Good
  • Filled Glass Fiber
  • Friction Low
  • ...
Plaslube® PPSU GF30 LE is a polyphenylsulfone (PPSU) grade reinforced with 30% glass fiber. Contains low extractable and is suitable for processing by injection molding. Potential applications... view more
Features
  • Filled Glass Fiber
Plaslube® PPSU GF30 TL10 LE is a PTFE lubricated polyphenylsulfone (PPSU) grade reinforced with 30% glass fiber. Contains low extractable and is suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
  • Lubricated
Plaslube® PSU GF20 TL5 is a PTFE lubricated polysulfone (PSU) grade reinforced with 20% glass fiber. Is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Features
  • Filled Glass Fiber
  • Lubricated
Plaslube® PSU GF30 TL15 is a PTFE lubricated polysulfone (PSU) grade reinforced with 30% glass fiber. Is suitable for processing by injection molding. Potential applications include manufacturing of... view more
Features
  • Filled Glass Fiber
  • Lubricated
Plaslube® PSU TL20 is a PTFE lubricated polysulfone (PSU) grade. Is suitable for processing by injection molding. Potential applications include manufacturing of automotive parts like panel bezels... view more
Features
  • Filled Glass Fiber
  • Lubricated
Plaslube® TPU 40D GL10 is a thermoplastic polyurethane elastomer (TPU) grade lubricated with 15% graphite powder. Is suitable for processing by injection molding. Potential applications include... view more
Features
  • Lubricated
Plaslube® TPU T/AL27 is a thermoplastic polyurethane elastomer (polyester) grade reinforced with 27% aramid fiber. Exhibits good wear resistance and is PTFE lubricated. Is suitable for processing by... view more
Features
  • Filled
  • Lubricated
  • Wear resistance Good
Plaslube® TPX-LCP-01015 by Techmer Engineered Solutions (Techmer PM) is a liquid crystal polymer (LCP) grade reinforced with 15% polytetrafluoroethylene (PFTE) lubricant. Plaslube® TPX-LCP-01015... view more
Features
  • Crystalline
  • Lubricated
Plaslube® TPX-PA6-03034 is a lubricated polyamide 6 (PA6) resin reinforced with glass fiber. Exhibits good wear resistance and low friction. It is suitable for processing by injection molding and... view more
Features
  • Filled Glass Fiber
  • Friction Low
  • Lubricated
  • Wear resistance Good
Plaslube® TPX-PA6-95002 is a lubricated polyamide 6 (PA6) resin. It is suitable for processing by injection molding and can be used in manufacturing of automotive parts like door-lock mechanisms and... view more
Features
  • Lubricated
Plaslube® TPX-POM-01060 is a lubricated polyoxymethylene (POM) homopolymer grade. Exhibits good wear resistance, low friction, low noise, reduced slip-stick, elimination of external lubes and... view more
Features
  • Abrasion resistance Good
  • Creep Resistance High
  • Dimensional stability Good
  • Friction Low
  • ...
Plaslube® Ultrawear 5902WT is an ultra high molecular weight polyethylene (UHMWPE) grade. Is suitable for processing by injection molding. Potential applications include manufacturing of automotive... view more
Mitsui Chemicals
Channel Alerts

Receive weekly digests on hot topics

Back to Top