OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
93 401 products match your search
Product Name
Supplier
Description
Arnitel® EM631 by DSM is a high-performance, thermoplastic copolyester (TPC). It is processed by extrusion and injection molding. It is a lighter, smarter, greener alternative to conventional... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flexibility Good
  • Grease Resistant
  • ...
Arnitel® EM631-HB by DSM is a high performance, heat stabilized, thermoplastic copolyester grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing environmental... view more
Features
  • Chemical resistance High
  • Flexibility Good
  • Heat stabilized
  • Processability Good
  • ...
Arnitel® EM740 by DSM is a high-performance, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing environmental impact. It is... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flexibility Good
  • Food Contact Acceptable
  • ...
Arnitel® FM8226 by DSM is a high performance, unreinforced and non-flame retardant thermoplastic copolyester grade. It is a lighter, smarter, greener alternative to conventional rubbers thus... view more
Features
  • Colorability Good
  • Compression Set Low
  • Cost Effective
  • Flexibility Good
  • ...
Arnitel® HT7719 by DSM is a non-reinforced & non flame retarded, high performance, heat resistant, thermoplastic copolyester. It shows chemical resistance. It is a lighter, smarter, greener... view more
Features
  • Chemical resistance Good
  • Flexibility Good
  • Heat Resistance Good
  • Processability Good
  • ...
Arnitel® HT8027 by DSM is a heat resistant, high performance, thermoplastic copolyester (COPE) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flexibility Good
  • Heat Aging Resistance Good
  • ...
Arnitel® ID 2045 by DSM is a highly flexible, high performance thermoplastic copolyester grade present as filament and containing greater than 50% renewable content. Exhibits excellent UV and... view more
Features
  • Adhesion Good
  • Chemical resistance Good
  • Flexibility Good
  • UV Resistance Good
Arnitel® ID2060-HT by DSM is a 100% recyclable, high performance, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flexibility Good
  • Processability Good
  • ...
Arnitel® JD7515 by DSM is a non-reinforced & non flame retardant, high performance, thermoplastic copolyester. It shows chemical resistance. This grade offers a unique combination of flexibility... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flexibility Good
  • Processability Good
  • ...
Arnitel® L-X07344 by DSM is a flame retardant, halogen-free copolyester. It shows chemical resistance. It can be processed by injection molding... view more
Features
  • Chemical resistance Good
  • Flame retarded Halogen free
Arnitel® L-X08566 by DSM is a non-reinforced copolyester. It shows chemical resistance. It can be processed by injection molding... view more
Features
  • Chemical resistance Good
  • Unfilled
Arnitel® L-X08588 by DSM is a non-reinforced copolyester. It shows chemical resistance. It can be processed by blow molding... view more
Features
  • Chemical resistance Good
  • Unfilled
Arnitel® PB420 by DSM is a high-performance, non-reinforced & non-flame retardant, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flexibility Good
  • Processability Good
  • ...
Arnitel® PB420-B by DSM is a high-performance, unfilled & non-flame retardant, thermoplastic copolyester (TPC). It is processed by blow molding. It allows for 20-40% lighter solutions than rubber... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flexibility Good
  • Mechanical Properties Good
  • ...
Arnitel® PB500-H by DSM is a high performance, heat stabilized thermoplastic copolyester (TPC) grade. Offers a unique combination of flexibility, high temperature resistance and strength with... view more
Features
  • Flexibility Good
  • Heat stabilized
  • Processability Good
  • Strength High
Arnitel® PB582-H by DSM is a high-performance, heat stabilized, non-reinforced & non-flame retardant, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flexibility Good
  • Heat stabilized
  • ...
Arnitel® PL380 by DSM is a high-performance, high flow, non-reinforced & non-flame retardant, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional... view more
Features
  • Abrasion resistance High
  • Chemical resistance Good
  • Color stability Good
  • Colorability Good
  • ...
Arnitel® PL381 by DSM is a high-performance, non-reinforced & non-flame retardant, thermoplastic copolyester (TPC). It is a lighter, smarter, greener alternative to conventional rubbers thus... view more
Features
  • Chemical resistance Good
  • Colorability Good
  • Cost Effective
  • Elasticity High
  • ...
Arnitel® PL381-H by DSM is a high-performance, heat stabilized, non-reinforced & nonflame retardant, thermoplastic copolyester (TPC) grade. It is processed by injection molding. It is a lighter... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flexibility Good
  • Heat stabilized
  • ...
Arnitel® PL420-H by DSM is a high-performance, heat stabilized, non-reinforced & non flame retardant, thermoplastic copolyester (TPC). It is a lighter, smarter, greener alternative to conventional... view more
Features
  • Chemical resistance Good
  • Flexibility Good
  • Heat stabilized
  • Processability Good
  • ...
Arnitel® PL460-S by DSM is a high-performance, non-reinforced, flame retardant, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Dimensional stability Good
  • Flame retarded
  • ...
Arnitel® PL461 by DSM is a high-performance, high flow, non-reinforced & non-flame retardant, thermoplastic copolyester (TPC). It is a lighter, smarter, greener alternative to conventional rubbers... view more
Arnitel® PL581 by DSM is a high-performance, non-reinforced & non-flame retardant, thermoplastic copolyester (TPC). It is processed by injection molding & extrusion. It is a lighter, smarter... view more
Arnitel® PL650 by DSM is a high-performance, high flow, non-reinforced & non-flame retardant, thermoplastic copolyester (TPC). It is processed by injection molding. It is a lighter, smarter, greener... view more
Arnitel® PM381 by DSM is a high-performance, food contact quality, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more
Arnitel® PM460 by DSM is a high-performance, non-reinforced & non-flame retarded, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus... view more
Arnitel® PM460-H by DSM is a high-performance, heat stabilized thermoplastic copolyester (TPC). It is processed by injection molding and extrusion. It is a lighter, smarter, greener alternative to... view more
Arnitel® PM471 by DSM is a high-performance, non-reinforced, flame retarded, thermoplastic copolyester (TPC). It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more
Arnitel® PM581 is a high-performance, heat stabilized and impact modified thermoplastic co-polyester (TPC) grade by DSM. It is suitable for processing by film-, profile- and sheet extrusion... view more
Features
  • Chemical resistance Good
  • Elasticity High
  • Fatigue Resistant
  • Flexibility Good
  • ...
Arnitel® PM650 by DSM is a high-performance, impact modified thermoplastic co-polyester (TPC) grade. It is suitable for processing by film-, profile- and sheet extrusion. Possesses flexibility... view more
Features
  • Chemical resistance Good
  • Elasticity High
  • Fatigue Resistant
  • Flexibility Good
  • ...
Arnitel® PP7932 (L-X07932) by DSM is a high performance, heat stabilized, thermoplastic copolyester (TPC) grade. Offers good aesthetics, good combination of high temperature resistance, flexibility... view more
Features
  • Flexibility Good
  • Heat stabilized
  • Processability Good
  • Strength High
Arnitel® UM551 by DSM is a high-performance, non-reinforced, non flame retardant, thermoplastic copolyester (TPC). It is a lighter, smarter, greener alternative to conventional rubbers thus... view more
Arnitel® UM551-V by DSM is a high-performance, halogen and phosphorous-free, flame retarded, thermoplastic co-polyester (TPC-ES). It is suitable for processing by extrusion and injection molding. It... view more
Features
  • Chemical resistance Good
  • Elasticity High
  • Fatigue Resistant
  • Flame retarded Halogen free
  • ...
Arnitel® UM552 by DSM is a high-performance, non-reinforced & non flame retardant, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus... view more
Arnitel® VT3104 by DSM is a high-performance, thermoplastic copolyester (TPC). It is processed by film extrusion. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more
Arnitel® VT3108 by DSM is a high-performance, highly breathable, thermoplastic copolyester (TPC). This food contact quality is processed by film extrusion and requires drying. It is a lighter... view more
Arnitel® VT3118 by DSM is a high performance, highly breathable, thermoplastic polyester elastomer. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing environmental... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flexibility Good
  • Food Contact Acceptable
  • ...
Arnitel® XG01IS by DSM is a high performance, flame retarded, halogen-free, thermoplastic copolyester (TPC). It exhibits chemical resistance. It offers a unique combination of flexibility, high... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Flame retarded Halogen free
  • Flexibility Good
  • ...
Arnitel® XG01JK by DSM is a high performance, non-reinforced, halogen-free, flame retardant, thermoplastic copolyester (TPC). It exhibits a unique combination of flexibility, high temperature... view more
Features
  • Cost Effective
  • Flame retarded Halogen free
  • Flexibility Good
  • Processability Good
  • ...
Arnitel® XG5855 by DSM is a high-performance, flame retardant thermoplastic co-polyester (TPC) grade. It is suitable for processing by extrusion. Possesses flexibility, strength, excellent... view more
Features
  • Chemical resistance Good
  • Elasticity High
  • Fatigue Resistant
  • Flame retarded
  • ...
Arnitel® XG5857 is a high-performance, flame retardant thermoplastic co-polyester (TPC) grade by DSM. It is suitable for processing by extrusion. Possesses flexibility, strength, excellent... view more
Features
  • Chemical resistance Good
  • Elasticity High
  • Fatigue Resistant
  • Flame retarded
  • ...
Arnitel® XG5858 by DSM is a high-performance, flame retardant thermoplastic co-polyester (TPC) grade. It can be processed by extrusion. Possesses flexibility, strength, excellent processing... view more
Features
  • Chemical resistance Good
  • Elasticity High
  • Fatigue Resistant
  • Flame retarded
  • ...
Arnitel® XG6029 by DSM is a high-performance, flame retardant thermoplastic co-polyester (TPC) grade. It is suitable for processing by extrusion. Possesses flexibility, strength, excellent... view more
Applications
Features
  • Chemical resistance Good
  • Elasticity High
  • Fatigue Resistant
  • Flame retarded
  • ...
EcoPaXX® PA410-HC10 UD by DSM is a continuous carbon fiber-reinforced polyamide 410. It is a heat-stabilized, black colored grade. EcoPaXX® PA410-HC10 UD is recommended for uni-directional tape. It... view more
Features
  • Filled Carbon fiber
  • Heat stabilized
EcoPaXX® PA410-HC11 UD by DSM is a continuous carbon fiber-reinforced polyamide 410. It is a heat-stabilized, black colored grade. EcoPaXX® PA410-HC11 UD is recommended for uni-directional tape. It... view more
Features
  • Filled Carbon fiber
  • Heat stabilized
EcoPaXX® PA410-HC12 UD by DSM is a continuous glass fiber reinforced polyamide 410. EcoPaXX® PA410-HC12 UD is recommended for uni-directional tape. It is a heat-stabilized, black colored grade. It... view more
Features
  • Filled Carbon fiber
  • Heat stabilized
EcoPaXX® PA410-HG10 UD by DSM is a high-performance, bio-based and heat stabilized polyamide (PA 4-10) grade, reinforced with 50% continuous glass fiber. It is designed for uni-directional tapes. It... view more
Features
  • Chemical resistance High
  • Crystallization Fast
  • Filled Glass Fiber
  • Heat stabilized
  • ...
EcoPaXX® PA410-HG12 UD by DSM is a bio-based, high-performance and heat stabilized polyamide (PA 4-10) grade, reinforced with 60% continuous glass fiber. It is designed for uni-directional tapes. It... view more
Features
  • Chemical resistance High
  • Crystallization Fast
  • Filled Glass Fiber
  • Heat stabilized
  • ...
EcoPaXX® Q-DWX10 by DSM is a 50% glass fiber-reinforced, long aliphatic polyamide 4-10. It is processed by injection molding. It shows excellent mechanical & flow performance. It is a food contact... view more
Features
  • Aliphatic
  • Appearance Pleasing Surface
  • Chemical resistance High
  • Crystalinity High
  • ...
EcoPaXX® Q-DWX6 by DSM is a bio-based, long chain aliphatic polyamide 4-10 (PA 4-10) grade reinforced with 30% glass fiber. It possesses excellent surface properties and very high melting point. It... view more
Features
  • Aliphatic
  • Appearance Pleasing Surface
  • Chemical resistance Good
  • Crystalinity High
  • ...
EcoPaXX® Q-E7300 is a castor oil based high-performance polyamide 4-10 (PA 4-10) by DSM that is particularly suitable for use in high-tech applications due to its low moisture absorption and... view more
Features
  • Chemical resistance Good
  • Mechanical Properties Excellent
  • Moisture Absorption Low
EcoPaXX® Q-FP4 by DSM is an impact modified, non-reinforced, long chain aliphatic polyamide 4-10 (PA 4-10). It is produced from tropical castor beans. It exhibits low moisture absorption, very high... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Flow Good
  • Impact modified
  • ...
EcoPaXX® Q-HG10 by DSM is a heat-stabilized, 50% glass fiber-reinforced, long aliphatic polyamide PA4-10 based on castor oil. It is processed by injection molding. It is particularly suitable for... view more
Features
  • Aliphatic
  • Chemical resistance Good
  • Cost Effective
  • Creep Resistance Good
  • ...
EcoPaXX® Q-HG6 by DSM is a heat-stabilized, 30% glass-fiber-reinforced, long aliphatic polyamide (PA410) based on castor oil. It is processed by injection molding. It is particularly suitable for... view more
Features
  • Aliphatic
  • Chemical resistance High
  • Cost Effective
  • Crystallization Fast
  • ...
EcoPaXX® Q-HG7 by DSM is a heat-stabilized, long chain polyamide 4-10 (PA 4-10) grade reinforced with 35% glass fiber. It contains release agent and 70% bio-based content. It is produced from... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Filled Glass Fiber
  • Heat stabilized
  • ...
EcoPaXX® Q-HG8 by DSM is a 40% glass fiber-reinforced, long chain polyamide 4-10 (PA 4-10) grade. It contains release agent and 70% bio-based content. It is produced from tropical castor beans... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Filled Glass Fiber
  • Heat stabilized
  • ...
EcoPaXX® Q-HGM24 by DSM is a heat stabilized, 10% glass reinforced, 20% mineral reinforced, high-performance long chain polyamide (PA410) based on castor oil. It offers exceptional performance in... view more
Features
  • Appearance Pleasing Surface
  • Chemical resistance High
  • Filled Glass Fiber
  • Filled Mineral
  • ...
EcoPaXX® Q-HXG10 (Q-X07970) by DSM is a 50% glass fiber-reinforced, heat-stabilized, high performance polyamide PA 410. It is processed by injection molding. It offers exceptional performance in the... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Heat stabilized
  • Moisture Absorption Low
  • ...
EcoPaXX® Q-HXG6 by DSM is a 30% glass fiber-reinforced, heat stabilized, high performance, long aliphatic polyamide PA 4-10. It is processed by injection molding. It possesses good thermal... view more
Features
  • Aliphatic
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow Good
  • ...
EcoPaXX® Q-HXGM24 by DSM is a heat-stabilized, 10% glass fiber-reinforced, 20% mineral-reinforced, high performance, long aliphatic polyamide (PA410) based on castor oil. It is processed by... view more
Features
  • Aliphatic
  • Appearance Pleasing Surface
  • Chemical resistance High
  • Filled Glass Fiber
  • ...
EcoPaXX® Q-KG5 by DSM is a long chain aliphatic polyamide 4-10 (PA 4-10) grade reinforced with 25% glass fiber. It is processed by injection molding and extrusion. This grade exhibits low moisture... view more
Features
  • Aliphatic
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow Good
  • ...
EcoPaXX® Q-KG6 by DSM is a heat-stabilized, long chain aliphatic polyamide (PA410) reinforced with 30% glass fiber based on castor oil. It offers moisture uptake and good flow. It offers exceptional... view more
Features
  • Aliphatic
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow Good
  • ...
EcoPaXX® Q-KG6-FC by DSM is a bio-based, high-performance polyamide 4-10 (PA 4-10) reinforced with 30% glass. It has excellent processability and surface quality. It exhibits excellent chemical... view more
Features
  • Chemical resistance Good
  • Filled
  • Food Contact Acceptable
  • Moisture Absorption Low
  • ...
EcoPaXX® Q-KGS6 by DSM is a flame-retardant, halogen-free, 30% glass reinforced, long aliphatic polyamide (PA410) based on castor oil. It offers excellent retention of electrical properties upon... view more
Features
  • Aliphatic
  • Chemical resistance High
  • Dimensional stability Good
  • Electrical Properties Good
  • ...
EcoPaXX® Q-KGS8 (Q-X07132) by DSM is a versatile, flame retardant, halogen-free, 40% glass fiber reinforced, long chain aliphatic polyamide 4-10 (PA 4-10) grade with UL94 V-0 & CTI 600V rating. It... view more
Features
  • Aliphatic
  • Chemical resistance High
  • Electrical Properties Good
  • Filled Glass Fiber
  • ...
EcoPaXX® Q-KS by DSM is a versatile halogen- & phosphorus-free, flame-retarded, bio-based, high performance long aliphatic polyamide 4-10 (PA 4-10) grade. It contains UL94 V0 & CTI 600V rating with... view more
Features
  • Aliphatic
  • Chemical resistance Good
  • Ductile
  • Flame retarded Halogen free
  • ...
EcoPaXX® Q-KV by DSM is a flame retarded, halogen- and phosphorus-free, bio-based, long aliphatic polyamide 4-10 (PA 4-10) grade. It contains UL94 V2 & CTI 600V rating with high flow and ductility... view more
Features
  • Aliphatic
  • Chemical resistance Good
  • Ductile
  • Flame retarded
  • ...
EcoPaXX® Q-PG6 by DSM is an impact-modified, bio-based, 30% glass fiber reinforced PA4-10 grade. It is suitable for processing by injection molding. It is a long aliphatic polyamide offering... view more
Features
  • Aliphatic
  • Chemical resistance Good
  • Filled Glass Fiber
  • Impact modified
  • ...
EcoPaXX® Q-PG8 (Q-X07209) by DSM is a 40% glass-fiber-reinforced, impact-modified polyamide (PA410) based on castor oil that is particularly suitable for use in high-tech applications. It is less... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Hydrolysis Resistant
  • Impact modified
  • ...
EcoPaXX® Q-Y by DSM is an unfilled, impact-modified, bio-based, long aliphatic polyamide PA4-10 grade. It is suitable for processing by injection molding. It offers good impact and surface esthetics... view more
Features
  • Aliphatic
  • Chemical resistance Good
  • Impact modified
  • Unfilled
EcoPaXX® Q150-D by DSM is a bio-based, high performance, low/medium viscosity, long aliphatic polyamide (PA410) based on castor oil. It offers low moisture uptake, good dimensional stability and... view more
Features
  • Aliphatic
  • Chemical resistance Good
  • Dimensional stability Good
  • Food Contact Acceptable
  • ...
EcoPaXX® Q150E by DSM is a low-medium viscosity, non-reinforced, long chain polyamide 4-10 (PA 4-10) grade. It is produced from tropical castor beans and contains 70% bio-based content. Exhibits low... view more
Features
  • Chemical resistance Good
  • Crystalinity High
  • Moisture Absorption Low
  • Unfilled
  • ...
EcoPaXX® Q170E by DSM is a non-reinforced, medium viscosity, long chain aliphatic polyamide 4-10 (PA 4-10) grade. It exhibits low moisture absorption, very high melting point and high... view more
Features
  • Aliphatic
  • Chemical resistance High
  • Food Contact Acceptable
  • Moisture Absorption Low
  • ...
EcoPaXX® Q170E-H by DSM is a heat-stabilized, unfilled, long chain aliphatic polyamide 4-10 (PA 4-10) grade with good thermal properties. It possesses medium viscosity and very high melting point... view more
Features
  • Aliphatic
  • Chemical resistance High
  • Food Contact Acceptable
  • Heat stabilized
  • ...
EcoPaXX® Q210E-H by DSM is a high viscosity, heat stabilized, non-reinforced, long aliphatic polyamide 4-10 (PA 4-10) grade. It offers excellent wear & friction properties at high humidity. It is... view more
Features
  • Aliphatic
  • Chemical resistance Good
  • Crystalinity High
  • Friction High
  • ...
ForTii® Ace JTX8 by DSM is a 30% glass reinforced, electro-friendly, polyphthalamide (PA4T) grade for automotive application. It offers improved resistance to blistering during the reflow-soldering... view more
Features
  • Chemical resistance High
  • Color stability Good
  • Filled Glass Fiber
  • Mechanical Properties Good
ForTii® Ace MX51 by DSM is a heat stabilized, 30% glass reinforced, polyamide (PA4T) for automotive applications. It is a PPA with unique fatigue performance and chemical resistance. The high... view more
Features
  • Aromatic
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • ...
ForTii® Ace MX52 by DSM is a heat-stabilized, 30% glass reinforced, polyamide (PA4T) for automotive applications. It is a PPA with unique fatigue performance and chemical resistance. The moisture... view more
Features
  • Aromatic
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • ...
ForTii® Ace MX53 by DSM is a 30% glass reinforced, heat stabilized, polyamide (PA4T) for automotive applications. It is suitable for processing by injection molding. It is a PPA offering fatigue... view more
Features
  • Aromatic
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
  • ...
ForTii® Ace MX53T by DSM is a heat stabilized polyphthalamide grade reinforced with 50% glass. It exhibits excellent surface properties and high glass transition temperature. Shows excellent... view more
Features
  • Chemical resistance Good
  • Filled
  • Heat stabilized
  • Toughness Low Temperature
ForTii® Ace WX51-FC by DSM is a 30% glass-reinforced polyphthalamide (PA4T), food contact quality, drinking water grade. It shows good high temperature and wet mechanical performance. ForTii® Ace... view more
Features
  • Filled Glass Fiber
  • Food contact approved
ForTii® Ace WX53-FC by DSM is a 50% glass reinforced, chemical resistant, polyphthalamide (PA4T). It shows good high temperature and wet mechanical performance. It exhibits weldline strength and... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Food contact approved
ForTii® Ace XTR31 by DSM is an unreinforced, lubricated, polyphthalamide. It shows medium to high viscosity. It exhibits excellent viscosity stability, chemical resistance, barrier performance and... view more
Features
  • Chemical resistance Good
  • Lubricated
  • Unfilled
ForTii® CX33 by DSM is a 50% glass fiber reinforced polyphthalamide (PPA) grade. It exhibits excellent processability, very good chemical resistance, very high part strength up to 120°C, low warpage... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Processability Good
  • Strength High
  • ...
ForTii® CX33F by DSM is a 50% glass fiber reinforced, wear and friction modified polyphthalamide (PPA) grade. It exhibits high stiffness, low warpage and chemical resistance properties. It offers... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Friction Low
  • Scratch Resistance Good
  • ...
ForTii® Eco E11 by DSM is a halogen- and red phosphorous-free, chemical resistant, 30% glass reinforced, PA4T grade. It offers an excellent balance in flow, toughness and stiffness with superior... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Halogen Free
  • ...
ForTii® Eco LDS62 by DSM is a bio-based, high temperature soldering resistant, high performance polyamide grade. Partially produced from renewable resources and castor beans as the basis for C10... view more
Applications
Features
  • Flow High
  • Halogen Free
  • Heat Resistance High
  • Moisture Absorption Low
  • ...
ForTii® F11 by DSM is a halogen- and red phosphorous-free, chemical resistant, 30% glass reinforced polyamide 4T (PA4T) grade. It is suitable for processing by injection molding. It offers an... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow Good
  • Halogen Free
  • ...
ForTii® F11C by DSM is a halogen- and red phosphorous-free, flame-retarded polyamide 4T (PA4T) grade. It is reinforced with 30% glass fiber. It offers improved color stability and chemical... view more
Features
  • Chemical resistance Good
  • Color stability Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • ...
ForTii® F12 by DSM is a halogen- and red phosphorous-free, electro-friendly, polyamide 4T (PA4T) grade. It is reinforced with 40% glass fiber. It offers good chemical resistance, excellent balance... view more
Features
  • Chemical resistance Good
  • Halogen Free
  • Mechanical Properties Good
  • Phosphorous Free
  • ...
ForTii® F81 by DSM is 15% glass reinforced, electro-friendly, halogen- and red phosphorous free, polyamide 4T (PA4T) grade. It offers good chemical resistance, balance of high flow and mechanical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Halogen Free
  • ...
ForTii® H11 by DSM is a high-flow, electro-friendly, halogen- and red phosphorous-free, polyamide 4T (PA4T) grade. It is reinforced with 30% glass fiber. It offers good chemical resistance... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Halogen Free
  • ...
ForTii® JTX2 by DSM is an electro-friendly, polyamide 4T (PA4T) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding and shows consistent performance. It offers... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
ForTii® K11 by DSM is a 30% glass reinforced, good flow, electro-friendly, PA4T grade. It offers goood chemical resistance and combined excellent mechanical properties with low warpage for miniature... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow Good
  • Mechanical Properties Excellent
  • ...
ForTii® K12 by DSM is 40% glass reinforced, chemical resistant, electro-friendly, PA4T grade. It offers combined high mechanical strength and good flowability. It is ideal for designs requiring... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flow Good
  • ...
ForTii® LDS51B by DSM is a halogen- & red phosphorus-free, truly reflow compatible and flame retarded, PA 4T grade. It is reinforced with 30% glass fiber. It is suitable for processing by injection... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Phosphorous Free
ForTii® LDS85B by DSM is a 30% glass-reinforced PPA grade. It can be processed by injection molding. It is recommended for laser direct structuring (LDS). It enables mechanical function integration... view more
Features
  • Chemical resistance Good
  • Ductile
  • Filled Glass Fiber
  • Impact Resistance Good
  • ...
ForTii® MX1 by DSM is a 30% glass reinforced, heat stabilized, PA4T for automotive applications. It is a high Tg PPA that outperforms in dimensional stability at elevated temperatures due to the... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Heat Deflection Temperature High
  • ...
ForTii® MX15HR by DSM is a 35% glass-reinforced, electro-friendly PA-4T with enhanced hydrolytic stability for automotive applications. It exhibits enhanced hydrolytic stability towards aggressive... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Hydrolytically Stable
  • Mechanical Properties Excellent
ForTii® MX2 by DSM is a heat stabilized, 40% glass reinforced, PA4T for automotive applications. It is a high Tg PPA that outperforms in dimensional stability at elevated temperatures due to the... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Heat Deflection Temperature High
  • ...
ForTii® MX3 by DSM is a 50% glass reinforced, heat stabilized, PA4T for automotive applications. It is a high Tg PPA that outperforms in dimensional stability at elevated temperatures due to the... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Heat Deflection Temperature High
  • ...
ForTii® NMX33 by DSM is a 50% glass reinforced, PA4T grade. It offers good chemical resistance, excellent adhesion to NMT treated metals and high mechanical performance in metal/plastics bonding. It... view more
Features
  • Adhesion Good
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat Deflection Temperature High
  • ...
ForTii® SP1 by DSM is a 50% glass reinforced PPA grade. It can be processed by injection molding... view more
Features
  • Filled
ForTii® T11 by DSM is a halogen- & red phosphorous-free, electro-friendly, polyamide 4T (PA4T) grade reinforced with 30% glass fiber. It offers good chemical resistance. It is suitable for... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Halogen Free
  • Phosphorous Free
  • ...
ForTii® TX1 by DSM is a halogen- & red phosphorous-free, electro-friendly, polyamide 4T (PA4T) grade reinforced with 30% glass fiber. It shows robust mechanical & JEDEC Level 2 performance, enabling... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Halogen Free
  • Phosphorous Free
ForTii® WF11 (P788A) by DSM is a 35% glass reinforced, heat stabilized, blend of polyphthalamide and polytetrafluoroethylene grade. It can be processed by injection molding. ForTii® WF11 (P788A) is... view more
Features
  • Filled
  • Heat stabilized
  • Wear resistance Good
ForTii® WX11-FC by DSM is a 30% glass-reinforced, drinking water, polyphthalamide grade. This food contact quality is suitable for processing by injection molding. It shows excellent hydrolysis... view more
Features
  • Chemical resistance Good
  • Filled
  • Food contact approved
  • Hydrolysis Resistant
  • ...
ForTii® XS51 by DSM is a flame retarded, 50% glass fiber reinforced, polyamide 4T (PA 4T) grade. It is halogen & red phosphorous free. It is suitable for processing by injection molding. It provides... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Flow Good
  • ...
ForTii® XS81B by DSM is polyamide 4T (PA 4T) grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. It offers excellent impact resistance, high stiffness and good... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Impact Resistance Ultra High
  • Stiffness High
  • ...
Novamid® 1010 by DSM is a heat stabilized, lubricated, low viscosity, polyamide 6 grade. It is suitable for processing by injection molding. Shows excellent flow, fast molding cycles, excellent... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1010C2 by DSM is a high flow, easy molding, lubricated, nucleated, polyamide 6 grade. It is suitable for processing by injection molding. It offers good chemical resistance, fast... view more
Features
  • Chemical resistance Good
  • Flow High
  • Lubricated
  • Moldability Good
  • ...
Novamid® 1010CH ES by DSM is a low viscosity, polyamide 6 grade. It is suitable for processing by injection molding. It offers good chemical resistance... view more
Features
  • Chemical resistance Good
  • Viscosity Low
Novamid® 1010G30 NA by DSM is a 30% glass fiber reinforced polyamide 6 (PA 6) grade. It offers high flow, easy molding and chemical resistance. It is suitable for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Moldability Good
Novamid® 1010GH30 NAT by DSM is a high-quality, heat-stabilized, chemical-resistant, 30% glass reinforced, polyamide. It is suitable for processing by injection molding. It is used in various fields... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Novamid® 1010GN2-15 NAT by DSM is a 15% glass fiber reinforced, flame retarded polyamide 6 (PA 6) grade. It exhibits high flow and chemical resistance properties. It is suitable for processing using... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • Chemical resistance Good
Novamid® 1010GN2-15Z BK701 by DSM is flame retarded, polyamide 6 (PA 6) grade reinforced with 15% glass fiber. It possesses high flow and chemical resistance properties. It is suitable for... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • Chemical resistance Good
Novamid® 1010GN2-20 NAT/BK37 by DSM is a flame retarded, 20% glass fiber reinforced, polyamide 6 (PA 6) grade. It exhibits chemical resistance property. It is suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Flame retarded
Novamid® 1010GN2-30 NAT/BK37 by DSM is a 30% glass fiber reinforced and flame retarded polyamide 6 (PA 6) grade. It possesses chemical resistance property. It is suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Flame retarded
  • Chemical resistance Good
Novamid® 1010GN7-20 BK37 by DSM is a flame-retarded, halogen-free polyamide 6 (PA 6) grade. It is reinforced with 20% glass fiber. It exhibits chemical resistance property. It is suitable for... view more
Features
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Chemical resistance Good
Novamid® 1010GN8-30 NAT by DSM is a flame-retarded, halogen-free, 30% glass fiber reinforced polyamide 6 (PA 6) grade. It exhibits chemical resistance property. Novamid® 1010GN8-30 NAT is processed... view more
Features
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Chemical resistance Good
Novamid® 1010J by DSM is a low viscosity, polyamide 6 grade. It offers good chemical resistance. It is suitable for processing by extrusion and injection molding... view more
Features
  • Chemical resistance Good
  • Viscosity Low
Novamid® 1010N2 by DSM is a flame-retarded, halogen-free polyamide 6 (PA 6) grade. It possesses chemical resistance property. It is suitable for processing by injection molding... view more
Features
  • Flame retarded Halogen free
  • Chemical resistance Good
Novamid® 1010N2 1ES NAT by DSM is halogen-free, flame-retarded polyamide 6 (PA 6) grade. It possesses chemical resistance property. Novamid® 1010N2 1ES NAT is designed for processing by injection... view more
Features
  • Chemical resistance Good
  • Flame retarded Halogen free
Novamid® 1011CH5-KR by DSM is a heat stabilized, nucleated, lubricated, chemical resistant, polyamide (PA) 6 thermoplastic grade. It offers good and fast flow-ability, very easy mold release and... view more
Features
  • Chemical resistance Good
  • Flexibility Good
  • Heat stabilized
  • Lubricated
  • ...
Novamid® 1013 by DSM is a low viscosity, polyamide 6 grade. It offers good chemical resistance. It is suitable for processing by injection molding and extrusion... view more
Features
  • Chemical resistance Good
  • Viscosity Low
Novamid® 1013C5 by DSM is a lubricated, nucleated, polyamide 6 grade. It offers very easy mold release, improved processing and good chemical resistance. It provides good & fast flow-ability and... view more
Features
  • Chemical resistance Good
  • Flow Good
  • Lubricated
  • Mold Release Good
  • ...
Novamid® 1013CH5-2 by DSM is an easy molding polyamide 6 (PA 6) grade. It possesses chemical resistance property. It is suitable for processing by injection molding... view more
Features
  • Moldability Good
  • Chemical resistance Good
Novamid® 1013G15 1 NA by DSM is a 15% glass fiber reinforced polyamide 6 (PA 6) grade. It possesses chemical resistance property. Novamid® 1013G15 1 NA is designed for processing using injection... view more
Features
  • Filled Glass Fiber
  • Chemical resistance Good
Novamid® 1013G30 1 NA by DSM is a 30% glass fiber reinforced polyamide 6 (PA 6) grade. It exhibits good chemical resistance. Novamid® 1013G30 1 NA is suitable for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
Novamid® 1013G45 1 NA by DSM is a chemical resistant, 45% glass fiber reinforced polyamide 6 (PA 6) grade. It is suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
  • Chemical resistance Good
Novamid® 1013GH15 1 NA/BK37 by DSM is a chemical resistant, 15% glass fiber reinforced, heat stabilized polyamide 6 (PA 6) grade. It is designed for processing by injection molding... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Novamid® 1013GH30 1 NA/BK701 by DSM is a chemical resistant, 30% glass fiber reinforced, heat stabilized polyamide 6 (PA 6) grade. Novamid® 1013GH30 1 NA/BK701 is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Heat stabilized
Novamid® 1013GH45 1 NA/BK701 by DSM is a chemical resistant, 45% glass fiber reinforced, heat stabilized, polyamide 6 (PA 6) grade by DSM. Novamid® 1013GH45 1 NA/BK701 is recommended for processing... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Chemical resistance Good
Novamid® 1013GMF H2 NAT/BK37 by DSM is a 30% glass fiber reinforced, heat-stabilized polyamide 6 (PA 6) grade. It possesses excellent dimensional stability and chemical resistance properties... view more
Features
  • Dimensional stability Good
  • Filled Glass Fiber
  • Heat stabilized
  • Chemical resistance Good
Novamid® 1013J by DSM is a heat stabilized, low viscosity, polyamide 6 grade. It is suitable for processing by injection molding. Shows excellent flow, fast molding cycles, excellent surface... view more
Features
  • Abrasion resistance High
  • Density High
  • Extinguishing Self
  • Cycle Time Short
  • ...
Novamid® 1015B by DSM is a low viscosity, polyamide 6 grade. It is suitable for processing by injection molding and extrusion. It exhibits good chemical resistance... view more
Features
  • Chemical resistance Good
  • Viscosity Low
Novamid® 1015C by DSM is a low viscosity, polyamide 6 grade. It is suitable for processing by injection molding and extrusion. It exhibits good chemical resistence... view more
Features
  • Chemical resistance Good
  • Viscosity Low
Novamid® 1015G35 NAT by DSM is a 35% glass reinforced polyamide 6 (PA 6) grade. It exhibits chemical resistance property. It is suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
  • Chemical resistance Good
Novamid® 1015G50 NA/BK37 by DSM is a 50% glass fiber reinforced polyamide 6 (PA 6) grade. It possesses high chemical resistance. Novamid® 1015G50 NA/BK37 is designed for processing using injection... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
Novamid® 1015GH35 BK37 by DSM is a 35% glass fiber reinforced, chemical resistant, heat stabilized, polyamide 6 (PA 6) grade. Novamid® 1015GH35 BK37 is suitable for processing by injection molding... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Chemical resistance Good
Novamid® 1015GT30 2 NAT by DSM is a glass fiber reinforced polyamide 6 (PA 6) grade. It possesses chemical resistance and improved impact properties. It is suitable for processing by injection... view more
Features
  • Filled Glass Fiber
  • Chemical resistance Good
Novamid® 1015GT30 BK37 by DSM is a 30% glass fiber reinforced polyamide 6 (PA 6) grade. It exhibits improved impact and high chemical resistance properties. Novamid® 1015GT30 BK37 is suitable for... view more
Features
  • Filled Glass Fiber
  • Chemical resistance Good
Novamid® 1015NT8 by DSM is a flame retarded polyamide 6 (PA 6) grade. It possesses chemical resistance and improved impact properties. Novamid® 1015NT8 is designed for processing by injection... view more
Features
  • Flame retarded
  • Chemical resistance Good
Novamid® 1017GH33 BK37A by DSM is a 33% glass fiber reinforced and heat-stabilized polyamide 6 (PA 6) grade. It possesses chemical resistance property. Novamid® 1017GH33 BK37A is suitable for... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Chemical resistance Good
Novamid® 1017GH33 BK701 by DSM is a 33% glass fiber reinforced polyamide 6 (PA 6) grade. It possesses excellent heat stability and chemical resistance properties. Novamid® 1017GH33 BK701 is designed... view more
Features
  • Filled Glass Fiber
  • Heat stabilized
  • Chemical resistance Good
Novamid® 1020A7 by DSM is a high-quality polyamide 6 grade. It is suitable for processing by extrusion. It possesses good chemical resistance... view more
Applications
Features
  • Chemical resistance Good
Novamid® 1020CA2 by DSM is a lubricated, melt stable, medium viscosity, polyamide 6 grade. It is suitable for processing by cast film and air cooled blown film extrusion. Possesses toughness... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 1020J by DSM is a food contact quality polyamide 6 grade. It is suitable for processing by extrusion. It possesses good chemical resistance... view more
Applications
Features
  • Chemical resistance Good
  • Food Contact Acceptable
Novamid® 1030AH1 by DSM is a polyamide 6 (PA 6) grade. It possesses chemical resistance property. Novamid® 1030AH1 is suitable for processing by extrusion... view more
Applications
Features
  • Chemical resistance Good
Novamid® 1030CA by DSM is a highly viscous, food contact quality polyamide 6 (PA 6) grade. It possesses high chemical resistance. Novamid® 1030CA is suitable for processing by extrusion... view more
Applications
Features
  • Chemical resistance Good
  • Food Contact Acceptable
Novamid® 1030CA4 by DSM is a lubricated, high viscosity, polyamide 6 grade. It possesses good chemical resistance. This food contact quality grade is suitable for processing by cast film extrusion... view more
Features
  • Chemical resistance Good
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Novamid® 1030J by DSM is a melt stable polyamide 6 grade. It is suitable for processing by extrusion. Possesses toughness, superior strength, good performance at low temperature, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 1033NY by DSM is a very-high viscosity, polyamide 6 grade. It is suitable for processing by film extrusion. It offers good chemical resistance... view more
Applications
Features
  • Chemical resistance Good
  • Viscosity High
Novamid® 1040A by DSM is a very-high viscosity, polyamide 6 monofilament grade. It shows good chemical resistance. It is suitable for processing by extrusion... view more
Applications
Features
  • Chemical resistance Good
  • Viscosity High
Novamid® 1040J by DSM is very-high viscosity, polyamide 6 grade. It is suitable for processing by film extrusion. It offers good chemical resistance... view more
Applications
Features
  • Chemical resistance Good
  • Viscosity High
Novamid® 2010J by DSM is a polyamide 6/66 (PA6/66) grade. It exhibits low viscosity. It is suitable for processing by injection molding... view more
Features
  • Viscosity Low
Novamid® 2020A by DSM is a highly lubricated, medium & high viscosity, polyamide 6/66 grade. This food contact quality grade is suitable for processing by extrusion... view more
Applications
Features
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
  • Viscosity Medium
Novamid® 2020A-1 by DSM is a lubricated, melt stable, medium viscosity, polyamide 6/66 grade. It is suitable for processing by cast film, air cooled and water chilled blown film and CoPA for film... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2020A-8 by DSM is a highly lubricated, medium & high viscosity, polyamide 6/66 grade. It is suitable for processing by extrusion. It is used in monofilaments... view more
Applications
Features
  • Lubricated
  • Viscosity High
  • Viscosity Medium
Novamid® 2020J by DSM is a medium/high viscosity, polyamide 6/66 neat resin. This food contact quality grade is suitable for processing by extrusion... view more
Applications
Features
  • Food Contact Acceptable
  • Viscosity High
  • Viscosity Medium
Novamid® 2030 by DSM is a lubricated polyamide (PA6/66) grade. It is suitable for processing by film extrusion. Possible applications of Novamid® 2030 include automotives and packaging industry... view more
Features
  • Lubricated
Novamid® 2030A by DSM is a high viscosity, lubricated, polyamide 6/66 grade. This food contact quality grade is processed by film extrusion... view more
Applications
Features
  • Food Contact Acceptable
  • Lubricated
  • Viscosity High
Novamid® 2030A-8 by DSM is a high viscosity, lubricated, polyamide 6/66 grade. It is suitable for processing by extrusion. It is used in high tenacity & high transparency fishing monofilament... view more
Applications
Features
  • Lubricated
  • Transparency High
  • Viscosity High
Novamid® 2030CA is a lubricated, melt stable, high viscosity, polyamide 6/66 grade by DSM. It is suitable for processing by cast film, air cooled blown film and CoPA for film extrusion. Possesses... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2030FC by DSM is a lubricated, melt stable, high viscosity, polyamide 6/66 grade. It is suitable for processing by cast film, air cooled blown film and CoPA for film extrusion. Possesses... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2030J by DSM is additive-free, polyamide 6/66 grade. This food contact quality grade is suitable for processing by film extrusion... view more
Applications
Features
  • Additive Free
  • Food Contact Acceptable
Novamid® 2320A by DSM is polyamide 6/66 grade. It is suitable for processing by extrusion. It is used in monofilaments... view more
Applications
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2320AK6 by DSM is a polyamide (PA6/66) grade. It is suitable for processing by extrusion... view more
Applications
Features
  • Lubricated
Novamid® 2320J by DSM is a polyamide 6/66 grade. It is suitable for processing by extrusion... view more
Applications
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2330J by DSM is polyamide 6/66 grade. It is suitable for processing by film extrusion... view more
Applications
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2420A by DSM is polyamide 6/66 grade. It is suitable for processing by extrusion. It finds application in monofilaments... view more
Applications
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2420J by DSM is a melt stable polyamide 6/66 grade. It is suitable for processing by film extrusion. Possesses toughness, superior strength, good performance at low temperature, superior... view more
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2430A by DSM is a high viscosity, polyamide 6/66 grade. It is suitable for processing by extrusion. It offers transparency and high lubrication. It is used in monofilament... view more
Applications
Features
  • Lubricated
  • Transparency Good
  • Viscosity High
Novamid® 2430A-1 by DSM is a lubricated, food contact quality polyamide 6/66 grade. It is suitable for processing by extrusion. It offers enhanced flexibility, transparency and stretch-ability of... view more
Applications
Features
  • Flexibility Good
  • Lubricated
  • Transparency High
Novamid® 2430A2 by DSM is a polyamide 6 (PA 6) and polyamide 66 (PA 66) alloy. It is designed for processing by film extrusion... view more
Applications
Novamid® 2430AH2 by DSM is a high viscosity, heat stabilized, polyamide 6/66 grade. It is suitable for processing by blow molding and extrusion... view more
Features
  • Heat stabilized
  • Viscosity High
Novamid® 2430J by DSM is polyamide 6/66 grade. This food contact quality grade is suitable for processing by film extrusion... view more
Applications
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2620A by DSM is polyamide 6 (PA 6) and polyamide 6T (PA 6T) grade. It is suitable for processing by extrusion. It is used in monofilaments... view more
Applications
Features
  • Lubricated
Novamid® 2620J by DSM is a polyamide 6/6T grade. It is suitable for processing by extrusion... view more
Applications
Features
  • Abrasion resistance Good
  • Barrier Oxygen
  • Density High
  • Extinguishing Self
  • ...
Novamid® 2934A by DSM is a high-quality polyamide PA6/66 grade. It is suitable for processing by extrusion. It has a super high viscosity, transparency and lubrication. It is easier to increase... view more
Features
  • Lubricated
  • Transparency High
  • Viscosity High
Novamid® 3010N 5-SL4-3X NAT by DSM is a non-reinforced, flame-retardant polyamide 66 (PA 66) grade. It possesses high chemical resistance properties. It is suitable for processing by injection... view more
Features
  • Chemical resistance High
  • Flame retarded
  • Unfilled
Novamid® 3010SR NAT by DSM is a polyamide 66 (PA 66) grade. It exhibits excellent chemical resistance and easy molding. Novamid® 3010SR NAT can be processed using injection molding. The recommended... view more
Features
  • Chemical resistance High
Novamid® 3021GH30 BK629 by DSM is a high-quality, heat stabilized polyamide PA66-GF30 grade reinforced with 30% glass fiber. It possesses excellent chemical resistance properties. It is designed for... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Heat stabilized
Novamid® 3021GH30 NAT by DSM is a high-quality, heat-stabilized polyamide PA66-GF30 grade reinforced with 30% glass fiber. It exhibits excellent chemical resistance properties. It is designed for... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Heat stabilized
Novamid® ES110C by DSM is a high-quality, non-reinforced, non-flame retarded, easy molding polyamide (PA 6) grade. It is suitable for processing by injection molding. It shows chemical resistance... view more
Features
  • Chemical resistance Good
  • Unfilled
Novamid® ES110J by DSM is a high-quality, non-reinforced, non-flame retarded, easy molding polyamide (PA 6) grade. It is suitable for processing by injection molding. It shows chemical resistance... view more
Features
  • Chemical resistance Good
  • Unfilled
Novamid® ES113J by DSM is a high-quality, non-reinforced, non-flame retarded, chemically resistant, low viscosity polyamide (PA 6) grade. It is suitable for processing by injection molding and... view more
Features
  • Chemical resistance Good
  • Unfilled
  • Viscosity Low
Novamid® ID 1030 by DSM is a strong, ductile and easy to print polyamide (PA 6/66) grade. Novamid® ID 1030 is suitable for processing by 3D printing using fused filament fabrication (FFF) equipment... view more
Features
  • Ductile
  • Printability Excellent
Novamid® ID 1030-CF10 by DSM is a polyamide 6/66 grade filled with 10% carbon-fiber. It is 3D printable at same speed as unreinforced plastics. It creates parts that are stronger, tougher and... view more
Features
  • Dimensional stability Good
  • Durable
  • Filled Carbon fiber
  • Mechanical Properties Good
  • ...
Novamid® ID 1070 by DSM is a very ductile and strong, high performance, high value polyamide copolymer grade present as filaments. It can withstand harsh environments and high temperatures of up to... view more
Features
  • Adhesion Good
  • Copolymer
  • Crystalinity High
  • Ductile
  • ...
Novamid® N-X158 by DSM is a polyamide 6/66 grade. It is recommended for film extrusion... view more
Applications
Novamid® ST120 NAT by DSM is a high-quality, impact modified, non reinforced, non-flame retarded polyamide PA6-I grade. It is suitable for processing by injection molding. It shows chemical... view more
Features
  • Chemical resistance Good
  • Impact modified
  • Unfilled
Novamid® ST145 NAT by DSM is a polyamide 6 grade. It can be processed by injection molding. It shows chemical resistance. Novamid® ST145 NAT is an impact modified grade... view more
Features
  • Chemical resistance Good
  • Impact modified
Novamid® ST220 NAT by DSM is a high-quality, impact-modified, medium viscosity, polyamide PA6-I grade. It is suitable for processing by injection molding. It shows chemical resistance properties... view more
Features
  • Chemical resistance Good
  • Impact modified
  • Viscosity Medium
Stanyl® 46HF4130 by DSM is a heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It possesses high flow & toughness, low... view more
Features
  • Abrasion resistance Good
  • Cost Effective
  • Cycle Time Short
  • Filled Glass Fiber
  • ...
Stanyl® 46HF4530 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber for electronics & electrical applications. It is suitable for processing... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® 46HF4550 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 50% glass fiber for electronics & electrical applications. It is suitable for processing... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® 46HF5040 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It provides unmatched... view more
Features
  • Chemical resistance High
  • Cost Effective
  • Filled Glass Fiber
  • Flame retarded
  • ...
Stanyl® 46HF5050 by DSM is a high-performance, heat stabilized, flame-retardant polyamide 4-6 (PA 4-6) grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® 46SF5030 by DSM is a high-performance, heat stabilized, flame-retardant polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® CR310 by DSM is a high-performance, heat stabilized, flame-retardant polyamide 4-6 (PA 4-6) reinforced with 30% glass fiber. It is a halogen- and red phosphorous-free grade. It is suitable... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Flow High
  • ...
Stanyl® Diablo HDT2700 by DSM is a high-performance, heat stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It offers superior heat resistance, design stiffness, wear & friction... view more
Features
  • Chemical resistance Good
  • Creep Resistance High
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® Diablo OCD2100 BK27021 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It... view more
Features
  • Abrasion resistance Good
  • Cost Effective
  • Creep Resistance Good
  • Fatigue Resistant
  • ...
Stanyl® Diablo OCD2300 BLK by DSM is a high-performance, heat stabilized polyamide (PA 4-6) grade reinforced with 50% glass fiber. It offers superior heat resistance, design stiffness, wear &... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Creep Resistance Good
  • Fatigue Resistant
  • ...
Stanyl® Diablo OCD2305 BM by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with glass fiber. It is suitable for processing by injection blow molding. It offers... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Filled Glass Fiber
  • Heat Resistance High
  • ...
Stanyl® HFX31S by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 20% glass fiber. It provides high mechanical properties and an... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX31SW by DSM is a flame retarded, polyamide 46 grade. It is reinforced with 20% glass. It is halogen- & red phosphorous-free grade. Stanyl® HFX31SW can be processed by injection molding... view more
Features
  • Chemical resistance Good
  • Filled
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX31SW WT94001 by DSM is a flame retarded, polyamide 46 grade. It is reinforced with 20% glass. It exhibits high flow and chemical resistance. It is halogen- & red phosphorous-free grade... view more
Features
  • Chemical resistance Good
  • Filled
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX33S by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 20% glass fiber. It provides high mechanical properties and an... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX50S by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 30% glass fiber. It retains its mechanical properties at high... view more
Features
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® HFX61S by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 35% glass fiber. It provides high mechanical properties and an... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX63S by DSM is a flame retarded, polyamide 46 grade. It is reinforced with 35% glass. It is halogen- & red phosphorous-free grade. Stanyl® HFX63S can be processed by injection molding. It... view more
Features
  • Chemical resistance Good
  • Filled
  • Flame retarded
  • Flow High
  • ...
Stanyl® HFX82S by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 45% glass fiber. It provides high mechanical properties and an... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® HGR1 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, superior heat- & chemical resistance, design stiffness, wear & friction... view more
Features
  • Chemical resistance Good
  • Flow High
  • Friction High
  • Heat Resistance High
  • ...
Stanyl® HGR2 BK00001 by DSM is a high-performance, non-reinforced, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, superior heat- & chemical resistance, abrasion... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Cost Effective
  • Friction Low
  • ...
Stanyl® HGR3-W (P1120D) by DSM is a heat stabilized, wear and friction modified, high-performance polyamide 46 grade. It is a bio-based, mass balanced grade with good chemical resistance. Designed... view more
Features
  • Chemical resistance Good
  • Heat stabilized
Stanyl® MC50 by DSM is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 35% glass fiber. It provides high mechanical properties, superior... view more
Features
  • Chemical resistance Good
  • Cost Effective
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • ...
Stanyl® MC51 by DSM is a high-performance, good or high-flow, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 35% glass fiber. It provides high mechanical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Flow High
  • ...
Stanyl® TC153 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade. It exhibits thermally conductivity and flame retardant characteristics. It provides high mechanical... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TC154 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade. It exhibits thermally conductivity and flame retardant characteristics. It provides high mechanical... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TC155 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade. It exhibits thermally conductivity and flame retardant characteristics. It provides high mechanical... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Flow High
  • Heat stabilized
  • ...
Stanyl® TC168 (NC239B) by DSM is a high-performance, thermally conductive, heat stabilized, flame retardant polyamide (PA 4-6) grade reinforced with 20% glass fiber. It offers chemical resistance... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Heat Resistance High
  • ...
Stanyl® TC170 (P823C) by DSM is a laser markable, thermal conductive, polyamide 46. It is reinforced with 20% glass. Stanyl® TC170 (P823C) can be processed by injection molding. It shows chemical... view more
Features
  • Chemical resistance Good
  • Filled
  • Laser Markable
Stanyl® TC502 by DSM is a high-performance, thermally conductive polyamide 4-6 (PA 4-6) grade. It provides high mechanical properties, superior heat- & chemical resistance, design stiffness, wear &... view more
Features
  • Chemical resistance Good
  • Flow High
  • Heat Resistance High
  • Stiffness High
  • ...
Stanyl® TC551 by DSM is a high-performance polyamide 4-6 (PA 4-6) grade. It exhibits thermally conductivity and flame retardant characteristics. It provides high mechanical properties, superior... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TE200F6 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TE200F6-FC by DSM is a food contact quality, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, heat- &... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow Good
  • Food Contact Acceptable
  • ...
Stanyl® TE200F6-FC BK27024 by DSM is a 30% glass reinforced, heat stabilized, polyamide 46 grade. Stanyl® TE200F6-FC BK27024 can be processed by injection molding. It is a food contact quality... view more
Features
  • Filled
  • Food Contact Acceptable
  • Heat stabilized
Stanyl® TE200F8 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It provides high mechanical properties, heat- & chemical resistance, design... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TE200S6 by DSM is low warpage, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass beads. It provides high mechanical properties, heat- & chemical... view more
Features
  • Chemical resistance Good
  • Filled Glass Bead
  • Flow Good
  • Heat Resistance High
  • ...
Stanyl® TE248F6 by DSM is a high-performance, heat- & UV-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It is stable to weather and provides high mechanical properties, heat- &... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flow Good
  • Heat Resistance High
  • ...
Stanyl® TE250F3 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 15% glass fiber. It provides high mechanical properties, strength, ductility... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Ductile
  • Fatigue Resistant
  • ...
Stanyl® TE250F6 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TE250F8 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It provides high mechanical properties, heat- & chemical... view more
Features
  • Chemical resistance High
  • Cost Effective
  • Creep Resistance Good
  • Filled Glass Fiber
  • ...
Stanyl® TE250F9 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 45% glass fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Cost Effective
  • Creep Resistance Good
  • Electrical Properties Good
  • ...
Stanyl® TE300 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear & friction and... view more
Features
  • Chemical resistance High
  • Flow High
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TE341 by DSM is a lubricated, high-performance, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Flow High
  • Grease Resistant
  • Heat Resistance High
  • ...
Stanyl® TE351 by DSM is a is a high-performance, heat-stabilized, flame-retardant polyamide (PA 4-6) grade. It provides high mechanical properties, heat- & chemical resistance, design stiffness... view more
Features
  • Chemical resistance High
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TE373 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, strength, design stiffness and process flow qualities. It is a... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TQ300 by DSM is a heat stabilized polyamide (PA 4-6) grade. Offers superior heat resistance, design stiffness, wear, friction and process flow qualities. It is suitable for processing by... view more
Features
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • Stiffness Good
  • ...
Stanyl® TQ300F5 by DSM is a heat stabilized polyamide (PA 4-6) grade reinforced with 25% glass fiber. It offers superior heat resistance, design stiffness, wear, friction and process flow qualities... view more
Features
  • Filled Glass Fiber
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TS200B3 by DSM is a polyamide 4-6 (PA 4-6) grade reinforced with 15% carbon fiber. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear & friction and... view more
Features
  • Chemical resistance High
  • Filled Carbon fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TS200F10 by DSM is a high-performance polyamide (PA 4-6) grade reinforced with 50% glass fiber. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TS200F6 by DSM is a high-performance polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TS241B3 by DSM is a polyamide 4-6 (PA 4-6) grade reinforced with 15% carbon fiber. It is suitable for processing by injection molding. It possesses high flow & toughness, low warpage &... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Cycle Time Short
  • Electrical Properties Good
  • ...
Stanyl® TS250F4D by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 20% glass fiber. It provides high mechanical properties, heat- & chemical... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® TS250F6D by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TS250F8 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It provides heat- & chemical resistance, design stiffness... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® TS250FK33 by DSM is a flame-retarded, low warpage, polyamide 4-6 (PA 4-6) grade, reinforced with 30% glass and mineral fiber. It is suitable for processing by injection molding. It provides... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled Mineral
  • Flame retarded
  • ...
Stanyl® TS271A1 by DSM is a high-performance, aramid-reinforced, wear- & friction-modified high heat polyamide that offers extremely low abrasion for gear & bushing applications. It provides high... view more
Features
  • Chemical resistance High
  • Filled Aramid Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TS271P4 by DSM is a high-performance polyamide 4-6 (PA 4-6) grade reinforced with 20% whiskers. It is suitable for processing by injection molding. It provides high mechanical properties... view more
Features
  • Chemical resistance High
  • Filled
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TS272A1 by DSM is a high-performance, aramid-reinforced, wear- & friction-modified high heat polyamide that offers extremely low abrasion for gear & bushing applications. It provides high... view more
Features
  • Chemical resistance High
  • Filled Aramid Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TS300 by DSM is a high-performance, non-reinforced polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance High
  • Flow High
  • Heat Resistance High
  • Stiffness High
  • ...
Stanyl® TS341 by DSM is a high-performance, non-reinforced polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It provides high mechanical properties, heat- & chemical... view more
Features
  • Chemical resistance High
  • Flow High
  • Heat Resistance High
  • Stiffness High
  • ...
Stanyl® TS341-N by DSM is a polyamide 46 grade. It can be processed by injection molding. Stanyl® TS341-N shows chemical resistance... view more
Features
  • Chemical resistance Good
Stanyl® TS350 by DSM is an unreinforced, heat-stabilized, flame-retardant, high-performance polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It provides high... view more
Features
  • Chemical resistance High
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TW200B6 by DSM is a high-performance, heat-stabilized, lubricated polyamide (PA 4-6) grade reinforced with 30% carbon fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Carbon fiber
  • ...
Stanyl® TW200F3 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 15% glass fiber. It provides high mechanical properties, strength, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW200F6 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW200F8 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It provides high mechanical properties, strength, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW209F8 by DSM is a platable, heat stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. Offers superior heat resistance, design stiffness, wear, friction and process flow... view more
Features
  • Filled Glass Fiber
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TW241B3 by DSM is a lubricated, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 15% carbon fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Carbon fiber
  • ...
Stanyl® TW241F10 by DSM is a high-performance, lubricated, heat-stabilized polyamide (PA 4-6) grade reinforced with 50% glass fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW241F12 by DSM is a high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 60% glass fiber. It provides high mechanical properties, strength, design stiffness, wear &... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW241F3 is a lubricated, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 15% glass fiber. It provides high mechanical properties, strength, design stiffness, wear... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW241F5 by DSM is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade reinforced with 25% glass fiber. It provides high mechanical properties, heat- & chemical... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TW241F6 by DSM is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design... view more
Features
  • Chemical resistance High
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW241F8 by DSM is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TW242FM10 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade reinforced with 50% glass and mineral fiber. It is suitable for processing by injection molding. It... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Filled Mineral
  • Flow High
  • ...
Stanyl® TW250F6 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It possesses high flow & toughness, retains its mechanical... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Flow High
  • ...
Stanyl® TW271B3 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 15% carbon fiber. It is suitable for processing by injection molding. It possesses... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Carbon fiber
  • ...
Stanyl® TW271B6 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 30% carbon fiber. It is suitable for processing by injection molding. It possesses... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Filled Carbon fiber
  • Filled PTFE
  • ...
Stanyl® TW271F6 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It possesses... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW271F6J10 by DSM is a heat-stabilized, chemical resistant, high-performance polyamide 4-6 (PA 4-6) + PTFE grade reinforced with 30% glass fiber. It provides unmatched performance and value... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Friction High
  • Heat Resistance Good
  • ...
Stanyl® TW271F8 by DSM is a high-performance, wear and friction modified, heat-stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 40% glass fiber. It is suitable for processing by... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Filled PTFE
  • Flow High
  • ...
Stanyl® TW272B6 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 30% carbon fiber. It is suitable for processing by injection molding. It possesses... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Carbon fiber
  • ...
Stanyl® TW275F6 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It provides unmatched... view more
Features
  • Chemical resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • Flow High
  • ...
Stanyl® TW278F10 by DSM is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. It retains... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Filled Glass Fiber
  • ...
Stanyl® TW300 by DSM is a heat stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. Possesses high flow, low warpage, low friction, reduced cycle time, easy... view more
Features
  • Abrasion resistance Good
  • Creep Resistance Good
  • Electrical Properties Good
  • Fatigue Resistant
  • ...
Stanyl® TW341 by DSM is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, cycle-time... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® TW341-B by DSM is a high-performnace, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, cycle-time... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® TW341-FC by DSM is a food contact quality, high-performance, lubricated, heat stabilized polyamide (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow... view more
Features
  • Chemical resistance Good
  • Flow High
  • Food Contact Acceptable
  • Heat Resistance High
  • ...
Stanyl® TW341-J by DSM is a high-performance, lubricated, heat stabilized polyamide (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, design stiffness, wear... view more
Features
  • Chemical resistance Good
  • Flow High
  • Heat Resistance High
  • Heat stabilized
  • ...
Stanyl® TW341-N by DSM is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow & toughness... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® TW350 by DSM is a high-performance, flame-retardant, heat-stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, design... view more
Features
  • Chemical resistance Good
  • Flame retarded
  • Flow High
  • Heat Resistance High
  • ...
Stanyl® TW363 by DSM is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow & toughness, cycle-time... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® TW371 by DSM is a high-performance, unfilled, heat-stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow & toughness, cycle-time... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® TW441 by DSM is a high-performance, high-viscosity, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Fatigue Resistant
  • Flow High
  • ...
Stanyl® WTP81 by DSM is a platable, lubricated, heat stabilized polyamide (PA 4-6) grade. Offers superior heat resistance, design stiffness, wear, friction and process flow qualities. Contains... view more
Features
  • Flow Good
  • Heat Resistance High
  • Heat stabilized
  • Lubricated
  • ...
Xytron™ G3010E (P1064C) by DSM is an impact modified polyphenylene sulfide (PPS) grade reinforced with 30% glass fiber. Offers extremely good chemical resistance, dimensional stability, intrinsic... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded
  • ...
Xytron™ G3010T (P1042A) by DSM is a polyphenylene sulfide (PPS) grade reinforced with 30% glass fiber. Exhibits enhanced mechanical strength. Offers extremely good chemical resistance, dimensional... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded
  • ...
Xytron™ G3020DW-FC by DSM is a food contact quality, flame-retardant polyphenylene sulfide (PPS) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It is a... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded
  • ...
Xytron™ G4010E (P952N) by DSM is an impact modified polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. Offers extremely good chemical resistance, dimensional stability, intrinsic... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded
  • ...
Xytron™ G4010T by DSM is flame-retardant polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It is a high-performance plastic... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded
  • ...
Xytron™ G4010W (R-X08297A) by DSM is a 40% glass fiber reinforced, wear & friction modified and flame retardant polyphenylene sulfide (PPS) grade. It exhibits excellent chemical resistance. Xytron™... view more
Features
  • Chemical resistance High
  • Filled Glass Fiber
  • Flame retarded
Xytron™ G4012T by DSM is halogen-free polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It is a high-performance plastic... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • ...
Xytron™ G4020DW-FC by DSM is a food contact quality, flame-retardant polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It is a... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Dimensional stability Good
  • Fatigue Resistant
  • ...
Xytron™ G4024T by DSM is a low flash polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It exhibits excellent mold release, extremely good chemical resistance and flame retardance... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Mold Release Good
Xytron™ G4080HR by DSM is flame-retardant polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It is a high-performance plastic... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Dimensional stability Good
  • Fatigue Resistant
  • ...
Xytron™ M5710T (P1043A) by DSM is a polyphenylene sulfide (PPS) grade reinforced with 57% glass fiber and mineral. Offers extremely good chemical resistance, dimensional stability, intrinsic flame... view more
Features
  • Chemical resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • Filled Mineral
  • ...
Back to Top