OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
94 253 products match your search
Product Name
Supplier
Description
TORELINA™ A504X90 by Toray is a branched polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. Offers excellent heat resistance... view more
Features
  • Flame resistance Good
  • Strength Good
TORELINA™ A673MTB (Black) by Toray is a black colored, linear polyphenylene sulfide (PPS) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. Possesses high... view more
Features
  • Flow High
  • Toughness Ultra High
  • Dimensional stability Good
  • Strength Good
  • ...
TORELINA™ A675GS1B by Toray is an elastomer modified polyphenylene sulfide (PPS) grade reinforced with 50% glass fiber and mineral filler. It offers good heat-cycling resistance, high weld strength... view more
Features
  • Filled Mineral
  • Dimensional stability Good
  • Strength Good
  • Heat Resistance High
  • ...
TORELINA™ A670X01 by Toray is an unreinforced polyphenylene sulfide (PPS) natural grade with elastomer improvement. Possesses excellent heat resistance, flame retardancy, excellent chemical... view more
Features
  • Flame resistance Good
  • Strength Good
TORELINA™ A604CX1B by Toray is a polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It offers flame retardancy, excellent electrical properties, excellent dimensional stability, high... view more
Features
  • Moldability Good
  • Filled Glass Fiber
  • Flame retarded
  • Dimensional stability Good
  • ...
Asahi Kasei
XYRON™ 1000H by Asahi Kasei is a modified polyphenylene ether (PPE) and polystyrene (PS). It offers high heat resistance and low dielectric properties. It is an unreinforced and non-flame retarded... view more
Features
  • Heat Resistance High
  • Unfilled
Asahi Kasei
XYRON™ 1951J by Asahi Kasei is a flame retarded & unreinforced polyphenylene ether (PPE) and polystyrene (PS). It offers good flow. This grade is processed by injection molding... view more
Features
  • Flame retarded
  • Flow Good
  • Unfilled
Asahi Kasei
XYRON™ 240Z by Asahi Kasei is a flame retarded & unreinforced polyphenylene ether (PPE) and polystyrene (PS). It is processed by injection molding. It offers good flow... view more
Features
  • Flame retarded
  • Flow Good
  • Unfilled
Asahi Kasei
XYRON™ 300H by Asahi Kasei is a non-flame retarded & unreinforced polyphenylene ether (PPE) and polystyrene (PS). XYRON™ 300H is processed by injection molding. It offers good flow... view more
Features
  • Flow Good
  • Unfilled
Asahi Kasei
XYRON™ 340V by Asahi Kasei is a flame retarded & unreinforced polyphenylene ether (PPE) and polystyrene (PS). This grade offers good flow. It is processed by injection molding... view more
Features
  • Flame retarded
  • Flow Good
  • Unfilled
BASF 3D Printing Solutions
Adsint PA12 by BASF 3D Printing Solutions is a multi-purpose, polyamide 12 powder for laser sintering. Designed for prototypes and small series functional parts. It is processable on most common SLS... view more
Features
  • Ductile
  • Strength Good
  • Toughness Good
BASF 3D Printing Solutions
Ultracur3D® DM 2505 by BASF 3D Printing Solutions is a rigid, reactive urethane photopolymer for dental models and molds. Suitable for high performance prototype prints, fully functional end-use... view more
Features
  • Rigidity High
  • Surface finish excellent
BASF 3D Printing Solutions
Ultracur3D® EL 60 by BASF 3D Printing Solutions is a reactive urethane photopolymer. It is a flexible resin with quick elastic response and low hardness. Exhibits optimal texturing ability and... view more
Features
  • Flexibility Good
  • Hardness Low
  • Surface finish excellent
BASF 3D Printing Solutions
Ultracur3D® EPD 1006 by BASF 3D Printing Solutions is a pace-setting 3D printable, daylight photopolymer. Offers impeccable quality of printed parts, increased production output rate, high... view more
Features
  • Surface finish excellent
BASF 3D Printing Solutions
Ultracur3D® FL 300 by BASF 3D Printing Solutions is a flexible, reactive urethane photopolymer with superior elongation and softness. Exhibits optimal texturing ability and outstanding surface... view more
Features
  • Elongation High
  • Flexibility Good
  • Soft
  • Surface finish excellent
Chemours
Viton™ A-100 by Chemours is an ultralow-viscosity, dipolymer of hexafluoropropylene and vinylidene fluoride. It is especially designed for use with Viton™ Curative No. 50. This gum polymer offers... view more
Features
  • Compression Set Low
  • Copolymer
  • Flow Good
  • Mold Release Good
  • ...
Chemours
Viton™ A-200 by Chemours is a low viscosity, fluoroelastomer dipolymer grade consisting of hexafluoropropylene and vinylidene fluoride. It is designed for use with the clean molding bisphenol... view more
Features
  • Compression Set Low
  • Copolymer
  • Flow Good
  • Mold Release Good
  • ...
Viton™ A-331C by Chemours is an intermediate viscosity, fluoroelastomer dipolymer grade consisting of hexafluoropropylene and vinylidene fluoride plus cure chemicals. It offers good mold flow... view more
Features
  • Compression Set Low
  • Copolymer
  • Flow Good
  • Mold Release Good
  • ...
Viton™ A-361C by Chemours is an intermediate viscosity, fluoroelastomer dipolymer grade consisting of hexafluoropropylene and vinylidene fluoride plus cure chemicals and metal adhesion promoter. It... view more
Features
  • Copolymer
  • Flow Good
  • Heat Resistance Good
  • Mold Release Good
  • ...
Viton™ A-401C by Chemours is fluoroelastomer dipolymer grade consisting of hexafluoropropylene and vinylidene fluoride plus cure chemicals. It offers increased mold flow, excellent storage... view more
Features
  • Chemical resistance Good
  • Compression Set Low
  • Copolymer
  • Flow Good
  • ...
DOMO Chemicals
DOMAMID® 6IK2 NC by DOMO Chemicals is a low temperature impact modified polyamide 6 grade. Designed for engineering plastics, electrical/ electronics, industrial and consumer goods. DOMAMID® 6IK2 NC... view more
Features
  • Impact modified
  • Strength Low Temperature
DOMO Chemicals
DOMAMID® PW 6FC NC by DOMO Chemicals is a general purpose polyamide 6 grade. Designed for engineering plastics, industrial and consumer goods. Suitable for processing by injection molding. DOMAMID®... view more
Features
  • Food contact approved
  • General purpose
ECONAMID® PLUS 6G30H2 BK by DOMO Chemicals is a heat-aging stabilized, 30% glass fiber reinforced polyamide 6 grade. Designed for engineering plastics, automotive, industrial and consumer goods... view more
Features
  • Filled Glass Fiber
TECHNYL STAR® AF 218 V30 BLACK 21N by DOMO Chemicals is a heat stabilized, high flow polyamide 66 (PA 66) grade reinforced with 30% glass fiber. Ideal for MuCell® injection molding technology... view more
Features
  • Filled Glass Fiber
  • Flow High
  • General purpose
  • Heat stabilized
  • ...
TECHNYL STAR® AF 218 V35 BLACK 21N is a heat stabilized, 35% glass fiber filled, high flow polyamide 66 (PA 66) grade by DOMO Chemicals. Offers exceptional processing behavior and excellent surface... view more
Features
  • Filled Glass Fiber
  • Flow High
  • General purpose
  • Heat stabilized
  • ...
Akulon® CO-KGV4/A JN.00.86 by DSM is a halogen-free, flame retardant polyamide 6 grade reinforced with 20% glass fiber. It is suitable for processing by injection molding. Used in molded case... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded Halogen free
  • Heat stabilized
  • ...
Akulon® CO-KGV5 by DSM is a halogen free, flame retardant polyamide 6 grade reinforced with 25% glass fiber. It is phosphorous-free, laser markable and offers chemical resistance. It is a heat... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Flame retarded
  • Halogen Free
  • ...
Akulon® Diablo HDT2500 BK00001 by DSM is a heat stabilized, 35% glass reinforced polyamide 66 and polyamide 6 alloy. Exhibits thermo-oxidative stability and good chemical resistance for various... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Filled Glass Fiber
Akulon® Diablo HDT2504BM (K-X08203) is a heat stabilized, 20% glass reinforced polyamide 66 and polyamide 6 alloy by DSM. Suitable for processing by injection blow molding. Akulon® Diablo HDT2504BM... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Filled Glass Fiber
Akulon® Diablo HDT2505BM (K-X08202) by DSM is a heat stabilized polyamide 66 and polyamide 6 alloy, reinforced with 25% glass. Offers good chemical resistance to various solvents. Akulon® Diablo... view more
Features
  • Chemical resistance Good
  • Heat stabilized
  • Filled Glass Fiber
Channel Alerts

Receive weekly digests on hot topics

Back to Top