OK
The Universal Selection Source:
Plastics & Elastomers
Online Course

Solving Adhesion Issues of Coatings & Inks

131 Days left to register

Thursday May 31, 2018

Solve faster your coating adhesion issues (blistering inducing metal corrosion, poor adhesion to plastics…) by efficiently determining compatible fix based on the problem root causes.


Jochum Beetsma will review factors disturbing adhesion (poor wetting, smoothness, lack of interactions, weak boundary layers...) and how to tackle failure at its origin.

Read the full Course Outline

Presented By:
Jochum Beetsma
Length: 90 min

Course Type: Formulation
Level: Intermediate

Next Session: May 31, 2018
10:00 a.m. (New York City)
4:00 p.m. (Paris)

Check your local time

Add To Cart

Why should you attend?

Adhesion is the single most important functionality of your coatings. And often formulators lack methodology and waste time to solve poor adhesion cases. Join this course and get to know what to do once you know the problem root cause:


  1. Troubleshoot faster by reviewing compatible fix (pre-treatments, additives…) based on root causes analysis
  2. Detect factors disturbing your coating adhesion by reviewing key adhesion mechanisms (wetting, mechanical anchoring, interactions...)
  3. Get expert guidance to solve your own adhesion challenges based on real-life examples
Troubleshooting Adhesion Issues Coatings Paints Inks

Who should attend?

Experienced developers, formulators, producers and users of coatings, inks and related systems (waterborne, solvent-based, high solids, melts and powder coatings).            

Course Outline

The following key aspects of coating adhesion will be covered:

  • Importance of wetting and spreading: surface tension, surface energy and pre-treatment.
  • Basic aspects of adhesion: interactions, hydrogen bonding, mechanical anchoring, penetration, diffusion and coupling.
  • Pre-conditions in order to achieve adhesion: complete wetting, surface roughness, adjustment of interactions and prevention of stress.
  • Influence of additives on adhesion: wetting agents, adhesion promoters and release agents.
  • Main causes & their solutions for adhesive failure: additives, stress, substitution, hydrophobicity, dirt, smoothness and weak boundary layers.
  • Every day problems associated with intercoat adhesion.

  • All these points will be illustrated with REAL LIFE EXAMPLES (wood coating system, adhesion on plastic...)

    Currency Converter Add To Cart

    Members Reviews

    Very clear overview on main categories of substrates + hints on how to proceed to solve coating adhesion issues encountered in real life.

    Dominique R. , from Tarkett GDL SA

    This excellent course helps to understand adhesion concepts and ways to prevent adhesion failure.

    Hong X. , from Cardolite Corporation

    This course gave very good introduction to many factors involved in adhesion.

    Jeffrey K. , from Sartomer

    Very good course! it gives me ideas on how to fix some problems in my job.

    Luca F. , from METCO Srl

    Excellent background into the topic!

    Tayo Y. , from Hewlett-Packard

    Courses You May Also Like :

    Bio-based Ink Formulation in Practice Bio-based Ink Formulation in Practice
    Printed Electronics: Coatings & Inks Conductive Fillers Selection Printed Electronics: Coatings & Inks Conductive Fillers Selection
    Water-based film inks: Advanced Formulation Water-based film inks: Advanced Formulation
    Pigments & Fillers Selection for Optimal Performance & Cost Pigments & Fillers Selection for Optimal Performance & Cost
    Pigment Dispersion & Stabilization in Practice Pigment Dispersion & Stabilization in Practice
    Introduction to Pigment Dispersion & Stabilization- Part 2 Introduction to Pigment Dispersion & Stabilization- Part 2
    Solving Film Defects Faster (Part 1) Solving Film Defects Faster (Part 1)
    Solving Coating Film Defects Part-2 Solving Coating Film Defects Part-2
    TiO2 Optimization: Practical Formulation Strategies TiO2 Optimization: Practical Formulation Strategies
    Introduction to Pigment Dispersion & Stabilization- Part 1 Introduction to Pigment Dispersion & Stabilization- Part 1
    Simplifying Physical Chemistry for Faster Problem Solving Simplifying Physical Chemistry for Faster Problem Solving
    Maximizing Adhesion in Adhesives & Coatings - Formulations & Processes Maximizing Adhesion in Adhesives & Coatings - Formulations & Processes

    Your cart

    The shopping cart is empty.

    Back to Top